380AA009NF2208F Glenair

38 380-009 EMI/RFI Non-Environmental Backshell with Strain Relief Type D - Rotatable Coupling - Low Profile 380 F S 009 M 16 05 F 6 CONNECTOR Product Series Length: S only DESIGNATORS (1/2 inch increments: Connector e.g. 6 = 3 inches) A-F-H-L-S Designator Strain Relief Style (F, G) ROTATABLE Angle and Profile COUPLING A = 90 Cable Entry (Table IV, V) B = 45 S = Straight Shell Size (Table I) TYPE D INDIVIDUAL OR OVERALL Basic Part No. Finish (Table II) SHIELD TERMINATION Length .060 (1.52) A Thread Minimum Order Length .060 (1.52) (Table I) Length 1.5 Inch Minimum Order Length 2.0 Inch (See Note 4) (See Note 4) C Typ. (Table I) E G (Table III) (Table III) STYLE 2 (STRAIGHT See Note 1) F (Table III) .88 (22.4) Max H (Table III) STYLE 2 (45 & 90 See Note 1) STYLE F STYLE G Light Duty Light Duty (Table IV) (Table V) Now Av ail ab le .416 (10.5) .072 (1.8) with the NESTOR Max Max Glenairs Non-Detent, Spring-Loaded, Self- Cable Cable Locking Coupling. K J Entry Range Add -445 to Specify This AS85049 Style N Coupling Interface. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 38 - Page 50380-009 EMI/RFI Non-Environmental Backshell with Strain Relief Type D - Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size Conn. Desig. E F G H A-F-L-S H Max Max Max Max 08 09 .457 (11.6) 1.500 (38.1) .500 (12.7) 1.445 (36.7) 10 11 .520 (13.2) 1.510 (38.4) .595 (15.1) 1.565 (39.8) 12 13 .582 (14.8) 1.580 (40.1) .610 (15.5) 1.585 (40.3) 15 14 .645 (16.4) 1.660 (42.2) .700 (17.8) 1.655 (42.0) 16 17 .738 (18.7) 1.770 (45.0) .885 (22.5) 1.725 (43.8) TABLE II: STANDARD FINISHES 18 19 .926 (23.5) 1.960 (49.8) .975 (24.8) 1.915 (48.6) GLENAIR 20 21 .926 (23.5) 1.960 (49.8) .975 (24.8) 1.915 (48.6) SYMBOL FINISH B Cadmium Plate, Olive Drab 22 23 1.020 (25.9) 2.110 (53.6) 1.125 (28.6) 2.025 (51.4) M Electroless Nickel 25 24 1.020 (25.9) 2.110 (53.6) 1.125 (28.6) 2.025 (51.4) NF Cadmium Plate, Olive Drab 28 1.145 (29.1) 2.160 (54.9) 1.225 (31.1) 2.195 (55.8) Over Electroless Nickel 32 1.207 (30.7) 2.260 (57.4) 1.575 (40.0) 2.445 (62.1) See Inside Back Cover for Additional Finish Options 36 1.238 (31.4) 2.360 (59.9) 1.775 (45.1) 2.445 (62.1) TABLE V: CABLE ENTRY TABLE IV: CABLE ENTRY Dash K Cable Entry Dash J Cable Range Max Max No. No. Max Min Max 01 .656 (16.7) .125 (3.2) 02 .968 (24.6) .125 (3.2) .250 (6.4) .781 (19.8) .250 (6.4) 02 03 1.046 (26.6) .250 (6.4) .375 (9.5) 03 .906 (23.0) .375 (9.5) 04 1.156 (29.4) .312 (7.9) .500 (12.7) 04 1.031 (26.2) .500 (12.7) 05 1.218 (30.9) .437 (11.1) .625 (15.9) 1.156 (29.4) .625 (15.9) 05 06 1.343 (34.1) .562 (14.3) .750 (19.1) 06 1.281 (32.5) .750 (19.1) 07 1.468 (37.3) .687 (17.4) .875 (22.2) 1.406 (35.7) .875 (22.2) 07 08 1.593 (40.5) .812 (20.6) 1.000 (25.4) 08 1.531 (38.9) 1.000 (25.4) 10 1.843 (46.8) 1.062 (27.0) 1.250 (31.8) 09 1.656 (42.1) 1.125 (28.6) 1.781 (45.2) 1.250 (31.8) 10 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 38 - Page 51 38