380AS018NF1004DA2 Glenair

38 380-018 EMI/RFI Non-Environmental Backshell with Strain Relief Type E - Rotatable Coupling - Low Profile 380 F S 018 M 24 12 D A 6 CONNECTOR Product Series Length: S only DESIGNATORS (1/2 inch increments: Connector e.g. 6 = 3 inches) A-F-H-L-S Designator Strain Relief Style ROTATABLE Angle and Profile (H, A, M, D) A = 90 COUPLING B = 45 Termination (Note 5) S = Straight D = 2 Rings TYPE E INDIVIDUAL T = 3 Rings Basic Part No. AND/OR OVERALL Cable Entry (Table X, XI) SHIELD TERMINATION Finish (Table II) Shell Size (Table I) Length .060 (1.52) Length .060 (1.52) Minimum Order Length 2.0 Inch A Thread Minimum Order (See Note 4) (Table I) Length 1.5 Inch (See Note 4) C Typ. (Table I) E (Table III) G STYLE 2 (Table III) (STRAIGHT F (Table III) See Note 1) .88 (22.4) Max H (Table III) Now Available with the NESTOR Glenairs Non-Detent, Spring- STYLE 2 Loaded, Self- Locking Coupling. (45 & 90 Add -445 to Specify This See Note 1) AS85049 Style N Coupling Interface. STYLE H STYLE A STYLE M STYLE D Heavy Duty Medium Duty Medium Duty Medium Duty (Table X) (Table XI) (Table XI) (Table XI) T W .135 (3.4) X Max Cable Cable Cable Cable Y V Y Z Range Range Range Entry 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 38 - Page 84380-018 EMI/RFI Non-Environmental Backshell with Strain Relief Type E - Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size E F G H Conn. Desig. A-F-L-S Max Max Max H Max 08 09 .520 (13.2) 1.680 (47.2) .477 (12.7) 1.730 (43.9) 10 11 .615 (15.6) 1.800 (45.7) .540 (13.7) 1.730 (43.9) TABLE II: STANDARD FINISHES 12 .630 (16.0) 1.820 (46.2) .602 (15.3) 13 1.790 (45.5) GLENAIR SYMBOL FINISH 14 15 .720 (18.3) 1.890 (48.0) .665 (19.6) 1.880 (47.8) B Cadmium Plate, Olive Drab 16 .905 (23.0) 1.980 (50.3) .758 (19.2) 17 1.990 (50.5) M Electroless Nickel 18 19 .995 (25.3) 2.150 (54.6) .946 (24.0) 2.180 (55.4) NF Cadmium Plate, Olive Drab 20 21 .995 (25.3) 2.150 (54.6) .946 (24.0) 2.180 (55.4) Over Electroless Nickel 22 1.145 (29.1) 2.260 (57.4) 1.040 (26.4) 23 2.330 (59.2) See Inside Back Cover for Additional Finish Options 24 25 1.145 (29.1) 2.260 (57.4) 1.040 (26.4) 2.330 (59.2) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. TABLE X: CABLE ENTRY Dimensions E, F, G and H will not apply. Dash T V Cable Range Please consult factory. No. Max Max Min Max 2. Metric dimensions (mm) are indicated in 04 .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) parentheses. 06 .780 (19.8) 1.145 (29.1) .250 (6.4) .437 (11.1) 3. Cable range is defined as the accommo- 08 .780 (19.8) 1.332 (33.8) .312 (7.9) .562 (14.3) dations range for the wire bundle or 10 .780 (19.8) 1.332 (33.8) .350 (8.9) .625 (15.9) cable. Dimensions shown are not 12 .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) intended for inspection criteria. 16 .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) 4. Consult factory for shorter lengths on 20 1.092 (27.7) 2.113 (53.7) .875 (22.2) 1.250 (31.8) straight backshells. 24 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 5. Designate Symbol T for 3 ring termina- 28 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) tion of individual and overall braid. 32 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) Designate D for standard 2 ring termina- tion of individual or overall braid. TABLE XI: CABLE ENTRY Dash W X Y Z Cable Range No. Max Max Max Max Min ** Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .344 (8.7) .562 (14.3) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .562 (14.3) .938 (23.8) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .750 (19.1) 1.250 (31.8) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) .781 (19.8) 1.375 (34.9) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) .969 (24.6) 1.625 (41.3) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 1.125 (28.6) 1.875 (47.6) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) 1.469 (37.3) 2.375 (60.3) * Not available in Style M clamp. ** Not Applicable Style D 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 38 - Page 85 38