380HA071NF1308M Glenair

38 380-071 EMI/RFI Non-Environmental Backshell with Strain Relief Type G - Rotatable Coupling - Low Profile 380 F S 071 M 16 08 A 6 CONNECTOR Product Series Length: S only DESIGNATORS (1/2 inch increments: Connector e.g. 6 = 3 inches) A-F-H-L-S Designator Strain Relief Style (H, A, M, D) ROTATABLE Angle and Profile COUPLING A = 90 Cable Entry (Table X, XI) B = 45 S = Straight Shell Size (Table I) TYPE G INDIVIDUAL Basic Part No. Finish (Table II) OR OVERALL SHIELD TERMINATION .500 (12.7) Max Length .060 (1.52) Length .060 (1.52) Minimum Order Minimum Order Length 2.0 Inch A Thread Length 1.5 Inch (See Note 4) (Table I) (See Note 4) C Typ. (Table I) G E (Table III) (Table III) STYLE 2 (STRAIGHT See Note 1) F (Table III) .88 (22.4) Max H (Table III) STYLE 2 (45 & 90 See Note 1) STYLE H STYLE A STYLE M STYLE D Heavy Duty Medium Duty Medium Duty Medium Duty (Table X) (Table XI) (Table XI) (Table XI) W T .135 (3.4) X Max Cable Cable Cable Cable Y V Y Z Range Range Range Entry 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 38 - Page 124380-071 EMI/RFI Non-Environmental Backshell with Strain Relief Type G - Rotatable Coupling - Low Profile TABLE II: STANDARD FINISHES TABLE III: ELBOW DIMENSIONS GLENAIR Shell Size SYMBOL FINISH E F G H Conn. Desig. B Cadmium Plate, Olive Drab A-F-L-S H Max Max Max Max M Electroless Nickel 08 09 .457 (11.6) 3.460 (87.9) .510 (13.0) 3.460 (87.9) NF Cadmium Plate, Olive Drab Over Electroless Nickel 10 11 .520 (13.2) 3.520 (89.4) .595 (15.1) 3.590 (91.2) See Inside Back Cover 12 13 .582 (14.8) 3.580 (90.9) .610 (15.5) 3.610 (91.7) for Additional Finish Options 14 15 .645 (16.4) 3.900 (99.1) .700 (17.8) 3.910 (99.3) 16 17 .738 (18.7) 4.010 (101.9) .885 (22.5) 4.000 (101.6) See inside back cover 18 19 .926 (23.5) 4.200 (106.7) .975 (24.8) 4.170 (105.9) fold-out or pages 13 and 20 21 .926 (23.5) 4.200 (106.7) .975 (24.8) 4.170 (105.9) 14 for unabridged 22 23 1.020 (25.9) 4.350 (110.5) 1.125 (28.6) 4.280 (108.7) 24 25 1.020 (25.9) 4.350 (110.5) 1.125 (28.6) 4.280 (108.7) Tables I and II. 28 1.145 (29.1) 4.400 (111.8) 1.225 (31.1) 4.450 (113.0) 32 1.207 (30.7) 4.500 (114.3) 1.575 (40.0) 4.700 (119.4) 36 1.238 (31.4) 4.590 (116.6) 1.775 (45.1) 4.700 (119.4) 1. When maximum cable entry (page 21) TABLE X: CABLE ENTRY Dash T V Cable Range is exceeded, Style 2 will be supplied. No. Max Max Min Dimensions E, F, G and H will not apply. Max 04 .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) Please consult factory. 06 .780 (19.8) 1.145 (29.1) .250 (6.4) 2. Metric dimensions (mm) are indicated in .437 (11.1) parentheses. 08 .780 (19.8) 1.332 (33.8) .312 (7.9) .562 (14.3) 10 .780 (19.8) 1.332 (33.8) .350 (8.9) 3. Cable range is defined as the accom- .625 (15.9) 12 .811 (20.6) 1.551 (39.4) .500 (12.7) modations range for the wire bundle or .750 (19.1) 16 .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) cable. Dimensions shown are not 20 1.092 (27.7) 2.113 (53.7) .875 (22.2) intended for inspection criteria. 1.250 (31.8) 4. Consult factory for shorter lengths on 24 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 28 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) straight backshells. 1.625 (41.3) 32 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) TABLE XI: CABLE ENTRY Dash W X Y Z Cable Range No. Max Max Max Max Min ** Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .344 (8.7) .562 (14.3) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .562 (14.3) .938 (23.8) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .750 (19.1) 1.250 (31.8) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) .781 (19.8) 1.375 (34.9) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) .969 (24.6) 1.625 (41.3) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 1.125 (28.6) 1.875 (47.6) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) 1.469 (37.3) 2.375 (60.3) * Not available in Style M clamp. ** Not Applicable Style D 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 38 - Page 125 38