380HS003N1106A4 Glenair

S: part s3 38 380-003-2OF2.prtS: part s3 38 380-003-2OF2.prt S: part s3 38 380-003-2OF2.prt 380-003 REVISIONS TABLE III SYM. SHELL SIZE E F G H P R S T DESCRIPTION DATE APPROVED A F,L,S MAX MAX MAX MAX MAX SEE SHEET 1 H MAX MAX MAX 03 6 .81(20.57) 1.03(26.26) .69(17.53) .96(24.38) .457(11.6) 1.674(42.5) .500(12.7) 1.684(42.8) .91(23.11) 1.91(48.77) .78(19.81) 1.78(45.21) 08 08 09 TABLE VI .520(13.2) 1.734(44.0) .590(15.1) 1.804(45.8) .97(24.64) 1.97(50.04) 10 10 11 .81(20.57) 1.81(45.97) CABLE RANGE DASH M GROUND .582(14.8) 12 12 13 1.794(45.6) .610(15.5) 1.824(46.3) 1.03(26.16) 2.03(50.56) .83(21.08) 1.83(46.48) NO RING I.D. MAX MIN MAX 14 14 15 .645(16.4) 1.884(47.9) .700(17.8) 1.894(48.1) 1.09(27.68) 2.09(53.09) .85(21.59) 1.85(46.99) 01 .968(24.6) .125( 3.2) .125( 3.2) .250( 6.4) .738(18.7) 1.994(50.6) .885(22.5) 1.984(50.4) 1.15(29.21) 2.15(54.61) .88(22.35) 16 16 17 1.88(47.75) 02 1.046(26.6) .250( 6.4) .375( 9.5) .250( 6.4) .926(23.5) 2.184(55.5) .975(24.8) 2.154(54.7) 1.20(30.48) 2.20(55.88) 18 18 19 .90(22.86) 1.90(48.26) 03 1.156(29.4) .375( 9.5) .250( 6.4) .500(12.7) 20 20 21 .926(23.5) 2.184(55.5) .975(24.8) 2.154(54.7) 1.27(32.26) 2.27(57.66) .93(23.62) 1.93(49.02) 04 1.218(30.9) .500(12.7) .375( 9.5) .625(15.9) 22 22 23 1.020(25.9) 2.334(59.3) 1.125(28.6) 2.264(57.5) 1.33(33.78) 2.33(59.18) .95(24.13) 1.95(49.53) 05 1.343(34.1) .625(15.9) .500(12.7) .750(19.1) 1.020(25.9) 2.334(59.3) 1.125(28.6) 2.264(57.5) 1.39(35.31) 2.39(60.71) 24 24 25 .98(24.89) 1.98(50.29) 06 1.463(37.2) .750(19.1) .875(22.2) .625(15.9) 1.145(29.1) 28 2.384(60.6) 1.225(31.1) 2.434(61.8) 1.46(37.08) 2.46(62.48) 1.15(29.21) 2.15(54.61) 07 1.593(40.5) .875(22.2) .625(15.9) 1.000(25.4) 32 1.207(30.7) 2.484(63.1) 1.575(40.0) 2.684(68.2) 1.59(40.38) 2.59(65.79) 1.21(30.73) 2.21(56.13) 08 1.718(43.6) 1.000(25.4) .750(19.1) 1.125(28.6) 36 1.238(31.4) 2.574(65.4) 1.775(45.1) 2.684(68.2) 1.69(42.93) 2.69(68.33) 1.24(31.50) 2.24(56.90) 09 1.843(46.8) 1.125(28.6) 1.250(31.8) .875(22.2) 1.27(32.26) 1.49(37.85) 61 6 .88(22.35) 1.10(27.94) 10 2.187(55.5) 1.250(31.8) 1.000(25.4) 1.375(34.9) TABLE IV TABLE VII CABLE RANGE CABLE RANGE DASH K N DASH J K NO MAX MIN NO MAX MAX MIN MAX MAX MAX PART NUMBER DEVELOPMENT 04 .780(19.8) .957(24.3) .125( 3.2) .312( 7.9) 03 .760(19.3) .843(21.4) .156( 4.0) .250( 6.4) 06 .780(19.8) 1.145(29.1) .250( 6.4) 04 .760(19.3) .906(23.0) .188( 4.8) .312( 7.9) .437(11.1) EXAMPLE: 380 A S 003 M 16 10 M 6 08 .780(19.8) 1.332(33.8) .312( 7.9) 06 .760(19.3) 1.093(27.8) .281( 7.1) .438(11.1) .562(14.3) 10 08 .760(19.3) .780(19.8) 1.332(33.8) .350( 8.9) .625(15.9) 1.187(30.1) .344( 8.7) .562(14.3) 12 .811(20.6) 1.551(39.4) .500(12.7) .750(19.1) 10 .760(19.3) 1.281(32.5) .375( 9.5) .625(15.9) PRODUCT SERIES 16 .905(23.0) 1.770(45.0) .625(15.9) 12 .760(19.3) 1.500(38.1) .438(11.1) .750(19.1) .937(23.8) 20 1.092(27.7) 2.113(53.7) .875(22.2) 16 1.073(27.3) 1.250(31.8) 1.719(43.7) .562(14.3) .938(23.8) CONNECTOR DESIGNATOR, 20 24 1.124(28.5) 2.363(53.7) 1.000(25.4) 1.375(34.9) 1.323(33.6) 2.062(52.4) .750(19.1) 1.250(31.8) A,F,H,L OR S, TABLE I 1 28 1.399(35.5) 2.770(70.4) 1.250(31.8) 24 1.323(33.6) 2.312(58.7) .781(19.8) 1.375(34.9) 1.625(41.3) ANGULAR FUNCTION, 32 1.399(35.5) 3.020(76.7) 1.437(36.5) 28 1.572(39.9) 2.719(69.1) .969(24.6) 1.625(41.3) 1.875(47.6) S = STRAIGHT 32 1.572(39.9) O 2.969(75.4) 1.125(28.6) 1.875(47.6) A = 90 40 O 1.572(39.9) 3.531(89.7) 1.469(37.3) 2.375(60.3) B = 45 O TABLE V H = 45 WELDED O CABLE RANGE DASH L J = 90 WELDED NO MAX MAX BASIC NO NOTES: 03 .630(16.0) .250( 6.4) 04 .755(19.2) .312( 7.9) 1 SEE SHEET 2 (COMMON ACCESSORY INTERFACE DATA). FINISH SYM, TABLE II 1 06 .942(23.9) .438(11.1) 08 1.067(27.1) .562(14.3) 2 STANDARD MINIMUM LENGTH FOR STYLE I IS 1.00 INCH, FOR 10 1.192(30.3) SHELL SIZE, TABLE III .625(15.9) 12 1.380(35.1) STYLE II IS 1.50 INCHES. FOR SHORTER LENGTH, CONSULT .750(19.1) 16 1.535(39.0) .938(23.8) FACTORY. APPLIES TO SYM S, STRAIGHT, ONLY. DASH NO, TABLE IV, V, VI, VII 20 2.848(46.9) 1.250(31.8) 24 2.255(57.3) 1.375(34.9) 3 WHEN CABLE DIAMETER EXCEEDS INSIDE DIAMETER OF CONNECTOR STRAIN RELIEF STYLE (A-M-D-L) 2.505(63.6) 28 1.625(41.3) SHELL, STYLE II WILL BE SUPPLIED. E, F, G & H DIMENSIONS 32 2.755(70.0) 1.875(47.6) DO NOT APPLY TO STYLE II, CONSULT FACTORY. LENGTH STRAIGHT ONLY 40 3.255(82.7) 2.375(60.3) (1/2 INCH INCREMENTS: e.g. 6 = 3 INCHES) 4. METRIC DIMENSIONS (mm) ARE INDICATED IN PARENTHESES. 5. GLENAIR 600 SERIES BACKSHELL ASSEMBLY TOOLS ARE RECOMMENDED C DRAWN T.LE 05/06/94 CAD 1994 FOR ASSEMBLY AND INSTALLATION. UNLESS OTHERWISE SPECIFIED CHECK P.OAKES 05/06/94 DIMENSIONS ARE IN INCHES 1211 AIR WAY - GLENDALE - CALIFORNIA 91201 ENGR R.PAINTER 05/06/94 6 SHELL SIZES 03 & 61 AVAILABLE ON ANGULAR FUNCTIONS H, J & S ONLY. TOLERANCES: F + BACKSHELL, RFI/EMI FOR 1/16 7. MATERIAL/FINISH: FRACTIONS - APPROVED + .XX .03 - ELBOW, ADAPTER, COUPLING NUT, FERRULES & CLAMP - AL ALLOY/TABLE II DECIMALS CONNECTORS PER TABLE I + .XXX .015 - HARDWARE - CRES/PASSIVATE + ANGLES 2 - APPROVED CODE IDENT. NO. SIZE REV. RELEASE DATE 05/09/94 DO NOT SCALE THIS DRAWING 06324 ORIGINAL 380-003 RELEASE DATE C F B/F 94-6774 P/C 380 NON REPARABLE COMMERCIAL ITEM SCALE N/A WEIGHT N/A SHEET 3 OF 3 Nestor Fuertes 1 of 1How to Order Reference Information Standard Materials and Finishes TABLE II - STANDARD FINISHES GLENAIR M85049 SYMBOL SYMBOL REFERENCE ONLY FINISH SPECIFICATION(S) A Cadmium Plate, Bright AMS-QQ-P-416, Type I, Class 2 B Cadmium Plate, Olive Drab AMS-QQ-P-416, Type II, Class 3 C* Anodize, Black AMS-A-8625, Type II, Class 2 A G* Hard Coat, Anodic AMS-A-8625, Type III, Class 1 J Iridite, Gold Over Cadmium Plate Over MIL-C-5541, Class 3 AMS-QQ-P-416, Type II, Electroless Nickel Class 3 over AMS-C-26074, Class 4, Grade B LF Cadmium Plate, Bright Over 1000 Hour Corrosion Resistance Electroless Nickel Electroless Nickel AMS-C-26074, Class 4, Grade B M N N Cadmium Plate, Olive Drab Over AMS-QQ-P-416, Type II, Class 3 over Electroless Nickel Electroless Nickel AMS-C-26074 NC Zinc Cobalt, Dark Olive Drab 96 Hour Corrosion Resistance NF Cadmium Plate, Olive Drab Over 1000 Hour Corrosion Resistance W Electroless Nickel T Cadmium Plate, Bright Over AMS-QQ-P-416, Type I, Class 3 Electroless Nickel ASTMB 733-90, SC2, Type I, Class 5, MIL-C-26074*** Cadmium Plate, Black AMS-QQ-P-416, Type II, Class 3 U ZU** Cadmium Plate, Black AMS-QQ-P-416, Type II, Class 3 Zinc-Nickel Alloy, Olive Drab ASTMB 841-91, Over Electroless Nickel 1000 Hour Salt ZN Spray * Anodize finish not suitable for EMI Shielding or grounding applications. ** Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes. The following standard materials are used for the majority of Glenair the elements used in Glenair s general accessory products. Contact backshells and connector accessories. However, backshell compo- Glenair for applicable specifications on items not listed below. nents are not limited to those items listed, but are representative of STANDARD MATERIALS - BACKSHELLS AND ACCESSORIES COMPONENT MATERIAL SPECIFICATION Aluminum AMS-QQ-A-200 Machined components: such as backshell bodies, fabricated elbows, protective covers, ASTMB221, 209 rotatable couplers, dummy stowage receptacles, lock nuts, G-spring support rings, EMI ground rings, grommet followers, etc. Die cast components: such as angular backshells, strain relief backshells, strain relief Aluminum QQ-A-591 bodies, strain relief saddles, special EMI ground rings, etc. ASTMB85, 26 Backshells or strain reliefs: available in optional corrosion resisting steel and Corrosion Resisting Steel ASTMA582 (300 Series) hardware: such as screws, washers, rivets, wire rope, sash chain, band straps, etc. AMS-QQ-S-763 Elastomeric seals: such as O-rings, cable jacket seals, grommets, etc. Silicone ZZ-R-765, MIL-R-25988 Teflon TFE Anti-friction and thrust washers Corrosion Resistant N/A Anti-rotation device Material NOTES BODY STRAP On all length callouts, tolerance is .060 unless otherwise Glenair offers an optional stainless steel body strap for specified. attaching protective covers as illustrated. To specify body strap, add suffix letter C to the end of the part number. For Unless otherwise specified, the following other dimensional example 360AS001M1610M6C. tolerances will apply: .xx = .03 (0.8) .xxx = .015 (0.4) Lengths = .060 (1.52) Angles = 5 Metric dimensions (mm) are indicated in parentheses NOTE: For your convenience these tables have 2-56 Screw and Nut been reproduced inside the back cover fold-out. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com 14