380HS007NF2105L6 Glenair

38 380-007 EMI/RFI Non-Environmental Backshell Light-Duty with Strain Relief Type C - Rotatable Coupling - Low Profile 380 F S 007 M 16 05 L 6 CONNECTOR Product Series Length: S only DESIGNATORS (1/2 inch increments: Connector e.g. 6 = 3 inches) A-F-H-L-S Designator Strain Relief Style (L, G) ROTATABLE Angle and Profile COUPLING A = 90 Cable Entry (Tables IV, V) B = 45 S = Straight Shell Size (Table I) TYPE C OVERALL SHIELD TERMINATION Basic Part No. Finish (Table II) Length .060 (1.52) A Thread Minimum Order Length 1.5 Inch Length .060 (1.52) (Table I) (See Note 4) Minimum Order Length 2.0 Inch (See Note 4) C Typ. (Table I) E (Table III) STYLE 2 G (STRAIGHT (Table III) See Note 1) F (Table III) .88 (22.4) Max H (Table III) STYLE 2 (45 & 90 See Note 1) Now Available with the NESTOR STYLE L STYLE G Light Duty Glenairs Non-Detent, Light Duty (Table IV) Spring-Loaded, Self- (Table V) Locking Coupling850 (21.6) .072 (1.8) Add -445 to Specify Max This AS85049 Style N Max Coupling Interface. Cable K Cable Range L Entry 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 38 - Page 30380-007 EMI/RFI Non-Environmental Backshell Light-Duty with Strain Relief Type C - Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for unabridged Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size E F G H Conn. Desig. A-F-L-S H Max Max Max Max 08 09 .457 (11.6) 1.680 (42.7) .500 (12.7) 1.781 (45.2) 10 11 .520 (13.2) 1.740 (44.2) .595 (15.1) 1.901 (48.3) 12 13 .582 (14.8) 1.800 (45.7) .610 (15.5) 1.921 (48.8) 14 15 .645 (16.4) 1.890 (48.0) .700 (17.8) 1.991 (50.6) 16 17 .738 (18.7) 2.000 (50.8) .885 (22.5) 2.081 (52.9) TABLE Il: STANDARD FINISHES 18 19 .926 (23.5) 2.190 (55.6) .975 (24.8) 2.251 (57.2) GLENAIR 20 21 .926 (23.5) 2.190 (55.6) .975 (24.8) 2.251 (57.2) SYMBOL FINISH B Cadmium Plate, Olive Drab 22 23 1.020 (25.9) 2.340 (59.4) 1.125 (28.6) 2.361 (60.0) M Electroless Nickel 24 25 1.020 (25.9) 2.340 (59.4) 1.125 (28.6) 2.361 (60.0) NF Cadmium Plate, Olive Drab 28 1.145 (29.1) 2.390 (60.7) 1.225 (31.1) 2.531 (64.3) Over Electroless Nickel 36 1.207 (30.7) 2.490 (63.2) 1.575 (40.0) 2.781 (70.6) See Inside Back Cover for Additional Finish Options 2.580 (65.5) 2.781 (70.6) 40 1.238 (31.4) 1.775 (45.1) TABLE IV: CABLE ENTRY TABLE V: CABLE ENTRY Dash K Cable Range Dash L Cable Entry No. Max Min Max Max Max No. 01 .781 (19.8) .062 (1.6) .125 (3.2) 01 .593 (15.1) .125 (3.2) 02 .968 (24.6) .125 (3.2) .250 (6.4) .718 (18.2) .250 (6.4) 02 03 1.046 (26.6) .250 (6.4) .375 (9.5) 03 .843 (21.4) .375 (9.5) 04 1.156 (29.4) .250 (6.4) .500 (12.7) .968 (24.6) .500 (12.7) 04 05 1.218 (30.9) .375 (9.5) .625 (15.9) 05 1.109 (28.2) .625 (15.9) 06 1.343 (34.1) .500 (12.7) .750 (19.1) 06 1.218 (30.9) .750 (19.1) 07 1.468 (37.3) .625 (15.9) .875 (22.2) 1.343 (34.1) .875 (22.2) 07 08 1.593 (40.5) .625 (15.9) 1.000 (25.4) 08 1.468 (37.3) 1.000 (25.4) 09 1.718 (43.6) .750 (19.1) 1.125 (28.6) 1.593 (40.5) 1.125 (28.6) 09 10 1.843 (46.8) .875 (22.2) 1.250 (31.8) 10 1.718 (43.6) 1.250 (31.8) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 38 - Page 31 38