390FA005B1604H Glenair

39 390-005 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type B - Rotatable Coupling - Low Profile 390 F S 005 M 16 10 M 6 CONNECTOR DESIGNATORS Product Series Length: S only (1/2 inch increments: A-F-H-L-S Connector e.g. 6 = 3 inches) Designator ROTATABLE Strain Relief Style COUPLING Angle and Profile (H, A, M, D) A = 90 B = 45 Cable Entry (Tables X, XI) TYPE B INDIVIDUAL S = Straight Shell Size (Table I) AND/OR OVERALL Basic Part No. SHIELD TERMINATION Finish (Table II) 1.188 (30.2) Approx. Length .060 (1.52) Length * A Thread Minimum Order Length 2.0 Inch O-Rings (Table I) (See Note 4) * Length .060 (1.52) C Typ. Minimum Order (Table I) Length 1.5 Inch (See Note 4) G E STYLE 2 (Table III) (Table III) (STRAIGHT See Note 1) F (Table III) .88 (22.4) Max H (Table III) STYLE 2 (45 & 90 See Note 1) STYLE H STYLE A STYLE M STYLE D Heavy Duty Medium Duty Medium Duty Medium Duty (Table X) (Table XI) (Table XI) (Table XI) T W .135 (3.4) X Max Cable Cable Cable Cable Y V Y Z Range Range Range Entry 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 39 - Page 24390-005 Submersible EMI/RFI Cable Sealing Backshell with Strain Relief Type B - Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. 1. When maximum cable entry TABLE III: ELBOW DIMENSIONS (page 21) is exceeded, Style 2 Shell Size will be supplied. Dimensions E F G H Conn. Desig. E, F, G and H will not apply. A-F-L-S H Max Max Max Max Please consult factory. 08 09 .500 (12.7) 2.551 (64.8) 2. Metric dimensions (mm) are 10 11 .520 (13.2) 2.601 (66.1) .595 (15.1) 2.671 (67.8) indicated in parentheses. 12 13 .582 (14.8) 2.661 (67.6) .610 (15.5) 2.691 (68.4) 3. Cable range is defined as the 15 .645 (16.4) 3.091 (78.5) .700 (17.8) 3.101 (78.8) 14 accommodations range for 16 17 .738 (18.7) 3.201 (81.3) .885 (22.5) 3.191 (81.1) the wire bundle or cable. 18 19 .926 (23.5) 3.391 (86.1) .975 (24.8) 3.361 (85.4) Dimensions shown are not 20 21 .926 (23.5) 3.391 (86.1) .975 (24.8) 3.361 (85.4) intended for inspection criteria. 22 23 1.020 (25.9) 3.604 (91.5) 1.125 (28.6) 3.534 (89.8) 4. Consult factory for shorter 25 1.020 (25.9) 3.604 (91.5) 1.125 (28.6) 3.534 (89.8) 24 lengths on straight backshells. 28 1.145 (29.1) 3.637 (92.4) 1.225 (31.1) 3.687 (93.6) 5. Interface O-Ring not supplied 32 1.207 (30.7) 3.737 (94.9) 1.575 (40.0) 3.937(100.0) with connector designator A. 36 1.238 (31.4) 3.877 (98.5) 1.775 (45.1) 3.987(101.3) TABLE X: CABLE ENTRY Dash T V Cable Range No. Max Max Min Max 04 .780 (19.8) .957 (24.3) .125 (3.2) .312 (7.9) 06 .780 (19.8) 1.145 (29.1) .250 (6.4) .437 (11.1) 08 .780 (19.8) 1.332 (33.8) .387 (9.8) .562 (14.3) 10 .780 (19.8) 1.332 (33.8) .350 (8.9) .625 (15.9) 12 .811 (20.6) 1.551 (39.4) .500 (12.7) .750 (19.1) 16 .905 (23.0) 1.770 (45.0) .625 (15.9) .937 (23.8) 20 1.092 (27.7) 2.113 (53.7) .875 (22.2) 1.250 (31.8) 24 1.124 (28.5) 2.363 (60.0) 1.000 (25.4) 1.375 (34.9) 28 1.399 (35.5) 2.770 (70.4) 1.250 (31.8) 1.625 (41.3) 32 1.399 (35.5) 3.020 (76.7) 1.437 (36.5) 1.875 (47.6) TABLE XI: CABLE ENTRY Dash W X Y Z Cable Range No. Max Max Max Max Min Max 03* .437 (11.1) .760 (19.3) .843 (21.4) .630 (16.0) .156 (4.0) .250 (6.4) 04* .437 (11.1) .760 (19.3) .906 (23.0) .755 (19.2) .188 (4.8) .312 (7.9) 06* .500 (12.7) .760 (19.3) 1.093 (27.8) .942 (23.9) .281 (7.1) .438 (11.1) 08 .563 (14.3) .760 (19.3) 1.187 (30.1) 1.067 (27.1) .387 (9.8) .562 (14.3) 10 .563 (14.3) .760 (19.3) 1.281 (32.5) 1.192 (30.3) .375 (9.5) .625 (15.9) 12 .563 (14.3) .760 (19.3) 1.500 (38.1) 1.380 (35.1) .438 (11.1) .750 (19.1) 16 .656 (16.7) 1.073 (27.3) 1.719 (43.7) 1.535 (39.0) .625 (15.9) .938 (23.8) 20 .656 (16.7) 1.323 (33.6) 2.062 (52.4) 1.848 (46.9) .875 (22.2) 1.250 (31.8) 24 .656 (16.7) 1.323 (33.6) 2.312 (58.7) 2.255 (57.3) 1.000 (25.4) 1.375 (34.9) 28 1.188 (30.2) 1.572 (39.9) 2.719 (69.1) 2.505 (63.6) 1.250 (31.8) 1.625 (41.3) 32* 1.187 (30.1) 1.572 (39.9) 2.969 (75.4) 2.755 (70.0) 1.437 (36.5) 1.875 (47.6) 40* 1.125 (28.6) 1.572 (39.9) 3.531 (89.7) 3.255 (82.7) 1.875 (47.6) 2.375 (60.3) * Not available in Style M clamp. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 39 - Page 25 39