400AS001N2209G3 Glenair

40 400-001 TAG Ring Backshell with Strain Relief Rotatable Coupling - Low Profile 400 F S 001 M 16 06 L 6 CONNECTOR Product Series Length: S only DESIGNATORS (1/2 inch increments: Connector e.g. 6 = 3 inches) A-F-H-L-S Designator Strain Relief Style (F, G, L) ROTATABLE Angle and Profile COUPLING A = 90 Cable Entry (Table IV, V) B = 45 S = Straight Shell Size (Table I) Basic Part No. Finish (Table II) Length * A Thread Ground Length .060 (1.52) (Table I) Spring Minimum Order Length 1.5 Inch (See Note 4) * Length .060 (1.52) C Typ. Minimum Order (Table I) Length 1.0 Inch (See Note 4) Shown with Style G Nut Add -445 to Specify Glenairs Non-Detent, STYLE 2 NESTO) Spring-Loaded, Self-Locking Coupling. (STRAIGHT See Page 41 for Details. See Note 1) E G (Table III) (Table III) .88 (22.4) Max F (Table III) H (Table III) STYLE 2 (45 & 90 Shown with Style L See Note 1) Strain Relief STYLE F STYLE G STYLE L Light Duty Light Duty Light Duty (Table V) (Table IV) (Table V) .416 (10.5) .072 (1.8) .850 (21.6) Approx. Approx. Approx. Cable Cable Cable L K L Entry Range Range 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 40 - Page 4400-001 TAG Ring Backshell with Strain Relief Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size E F G H Conn. Desig. H A-F-L-S Max Max Max Max 08 09 .457 (11.6) 1.660 (42.2) .500 (12.7) 1.670 (42.4) 10 11 .520 (13.2) 1.720 (43.7) .595 (15.1) 1.790 (45.5) 12 13 .582 (14.8) 1.780 (45.2) .610 (15.5) 1.810 (46.0) 14 15 .645 (16.4) 1.870 (47.5) .700 (17.8) 1.880 (47.8) 17 16 .738 (18.7) 1.980 (50.3) .885 (22.5) 1.970 (50.0) 18 19 .926 (23.5) 2.170 (55.1) .975 (24.8) 2.140 (54.4) 20 21 .926 (23.5) 2.170 (55.1) .975 (24.8) 2.140 (54.4) 22 23 1.020 (25.9) 2.320 (58.9) 1.125 (28.6) 2.250 (57.2) 24 25 1.020 (25.9) 2.320 (58.9) 1.125 (28.6) 2.250 (57.2) 28 1.145 (29.1) 2.370 (60.2) 1.225 (31.1) 2.420 (61.5) 32 1.207 (30.7) 2.470 (62.7) 1.575 (40.0) 2.670 (67.8) 36 1.238 (31.4) 2.560 (65.0) 1.775 (45.1) 2.670 (67.8) TABLE IV: CABLE ENTRY TABLE V: CABLE ENTRY Cable Range Dash K Cable Entry Dash L No. Max Max No. Max Min Max 02 .545 (13.8) .250 (6.4) 02 .968 (24.6) .125 (3.2) .250 (6.4) 03 .670 (17.0) .375 (9.5) 03 1.046 (26.6) .250 (6.4) .375 (9.5) 04 .795 (20.2) .500 (12.7) 04 1.156 (29.4) .250 (6.4) .500 (12.7) 05 .920 (23.4) .625 (15.9) 05 1.218 (30.9) .375 (9.5) .625 (15.9) 06 1.045 (26.5) .750 (19.1) 06 1.343 (34.1) .500 (12.7) .750 (19.1) 07 1.170 (29.7) .875 (22.2) 07 1.468 (37.3) .625 (15.9) .875 (22.2) 08 1.295 (32.9) 1.000 (25.4) 08 1.593 (40.5) .625 (15.9) 1.000 (25.4) 09 1.420 (36.1) 1.125 (28.6) 09 1.718 (43.6) .750 (19.1) 1.125 (28.6) 10 1.670 (42.4) 1.250 (31.8) 10 1.843 (46.8) .875 (22.2) 1.250 (31.8) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 40 - Page 5 40