400HS015M1103F3 Glenair

40 400-015 TAG Ring Backshell with Strain Relief Self-Locking Rotatable Coupling - Straight Only 400 F S 015 M 16 06 L 6 CONNECTOR Product Series Length: S only DESIGNATORS (1/2 inch increments: Connector e.g. 6 = 3 inches) A-F-H-L-S Designator Strain Relief Style (F, G, L) SELF-LOCKING Angle and Profile ROTATABLE S = Straight Cable Entry (Table IV, V) COUPLING Basic Part No. Shell Size (Table I) Finish (Table II) Length * Length .060 (1.52) A Thread Ground Spring Minimum Order Length 2.0 Inch (Table I) (See Note 4) * Length .060 (1.52) E Typ. Minimum Order (Table I) Length 1.5 Inch (See Note 4) Anti- Shown with Style G Nut STYLE 2 Rotation (STRAIGHT Device See Note 1) STYLE F STYLE G STYLE L Light Duty Light Duty Light Duty (Table V) (Table IV) (Table V) .416 (10.5) .072 (1.8) .850 (21.6) Approx. Approx. Approx. Cable Cable Cable L K L Entry Range Range 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 40 - Page 16400-015 TAG Ring Backshell with Strain Relief Self-Locking Rotatable Coupling - Straight Only See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE IV: CABLE ENTRY Dash K Cable Entry No. Max Max 02 .545 (13.8) .250 (6.4) 03 .670 (17.0) .375 (9.5) 04 .795 (20.2) .500 (12.7) 05 .920 (23.4) .625 (15.9) 06 1.045 (26.5) .750 (19.1) 07 1.170 (29.7) .875 (22.2) 08 1.295 (32.9) 1.000 (25.4) 09 1.420 (36.1) 1.125 (28.6) 10 1.670 (42.4) 1.250 (31.8) TABLE V: CABLE ENTRY Dash L Cable Range No. Max Min Max 02 .968 (24.6) .125 (3.2) .250 (6.4) 03 1.046 (26.6) .250 (6.4) .375 (9.5) 04 1.156 (29.4) .250 (6.4) .500 (12.7) 05 1.218 (30.9) .375 (9.5) .625 (15.9) 06 1.343 (34.1) .500 (12.7) .750 (19.1) 07 1.468 (37.3) .625 (15.9) .875 (22.2) 08 1.593 (40.5) .625 (15.9) 1.000 (25.4) 09 1.718 (43.6) .750 (19.1) 1.125 (28.6) 10 1.843 (46.8) .875 (22.2) 1.250 (31.8) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 40 - Page 17 40