420AA001NF1802 Glenair

42 420-001 Sealtite/Liquidtite Conduit Backshell Rotatable Coupling - Low Profile 420 F S 001 M 16 03-6 CONNECTOR Product Series Length: S only DESIGNATORS (1/2 inch increments: Connector e.g. 6 = 3 inches) A-F-H-L-S Designator Cable Entry (Table IV) ROTATABLE Angle and Profile COUPLING A = 90 Shell Size (Table I) B = 45 S = Straight Finish (Table II) Basic Part No. Sealtite/Liquidtite Length * Conduit or Equivalent Length .060 (1.52) A Thread (Customer Furnished) Minimum Order Length 3.0 Inch O-Ring (Table I) (See Note 4) C Typ. K ** L ** M ** (Table I) * Length .060 (1.52) N Wrench Flat STYLE 2 Minimum Order Length 2.5 Inch (Table IV) ** (Table IV) (STRAIGHT) (See Note 4) E G .88 (22.4) (Table III) (Table III) Max F (Table III) STYLE 2 H (Table III) (45 & 90) 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 42 - Page 2420-001 Sealtite/Liquidtite Conduit Backshell Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size E F G H Conn. Desig. A-F-L-S H Max Max Max Max 08 09 .457 (11.6) 1.810 (46.0) .500 (12.7) 1.820 (46.2) 10 11 .520 (13.2) 1.870 (47.5) .595 (15.1) 1.940 (49.3) 12 13 .582 (14.8) 1.930 (49.0) .610 (15.5) 1.960 (49.8) 15 14 .645 (16.4) 2.020 (51.3) .700 (17.8) 2.030 (51.6) 16 17 .738 (18.7) 2.130 (54.1) .885 (22.5) 2.120 (53.8) 18 19 .926 (23.5) 2.320 (58.9) .975 (24.8) 2.290 (58.2) 20 21 .926 (23.5) 2.320 (58.9) .975 (24.8) 2.290 (58.2) 22 23 1.020 (25.9) 2.470 (62.7) 1.125 (28.6) 2.400 (61.0) 24 25 1.020 (25.9) 2.470 (62.7) 1.125 (28.6) 2.400 (61.0) 28 1.145 (29.1) 2.520 (64.0) 1.225 (31.1) 2.570 (65.3) 32 1.207 (30.7) 2.620 (66.5) 1.575 (40.0) 2.820 (71.6) 36 1.238 (31.4) 2.710 (68.8) 1.775 (45.1) 2.820 (71.6) TABLE IV: CABLE ENTRY Dash Conduit K Dimension (Ref) L Dimension (Ref) M N Max No. Size (Ref.) Min Max Min Max Max Wrench Flats 01 3/8 .484 (12.3) .504 (12.8) .690 (17.5) .710 (18.0) 1.155 (29.3) 1.000 (25.4) 02 1/2 .622 (15.8) .642 (16.3) .820 (20.8) .840 (21.3) 1.282 (32.6) 1.125 (28.6) 03 3/4 .820 (20.8) .840 (21.3) 1.030 (26.2) 1.050 (26.7) 1.531 (38.9) 1.375 (34.9) 04 1 1.041 (26.4) 1.066 (27.1) 1.290 (32.8) 1.315 (33.4) 1.781 (45.2) 1.625 (41.3) 05 1 1/4 1.380 (35.1) 1.410 (35.8) 1.630 (41.4) 1.660 (42.2) 2.218 (56.3) 2.062 (52.4) 06 1 1/2 1.575 (40.0) 1.600 (40.6) 1.875 (47.6) 1.900 (48.3) 2.468 (62.7) 2.312 (58.7) 07 2 2.020 (51.3) 2.045 (51.9) 2.350 (59.7) 2.375 (60.3) 3.031 (77.0) 2.875 (73.0) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. O-Ring not supplied with Connector Designator A. 6. Sealtite is a trademark of Anaconda Corp. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 42 - Page 3 42