420HB001M1702 Glenair

42 Series 42 TM Sealtite /Liquidtite Conduit Backshells 420 F S 001 M 16 03-6 CONNECTOR Product Series Length: S only DESIGNATORS (1/2 inch increments: Connector e.g. 6 = 3 inches) A-F-H-L-S Designator Dash No. (Table IV) ROTATABLE Angular Function COUPLING A = 90 Shell Size (Table I) B = 45 S = Straight Finish (Table II) Basic Part No. * Length .060 (1.52) Minimum Order Length 2.5 Inch (See Note 4) Length * Sealtite/Liquidtite Conduit or Equivalent Length .060 (1.52) A Thread O-Ring (Customer Furnished) Minimum Order Length 3.0 Inch (Table I) (See Note 4) C Typ. K ** L ** M ** (Table I) N Wrench Flat STYLE 2 (Table IV) (STRAIGHT) ** (Table IV) E G .88 (22.4) (Table III) (Table III) Max F (Table III) STYLE 2 H (Table III) (45 & 90) 6/1999 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 42-2Series 42 TM Sealtite /Liquidtite Conduit Backshells See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III Shell Size E F G H Conn. Desig. A-F-L-S H Max Max Max Max 08 09 .457 (11.6) 1.810 (46.0) .500 (12.7) 1.820 (46.2) 10 11 .520 (13.2) 1.870 (47.5) .595 (15.1) 1.940 (49.3) 12 13 .582 (14.8) 1.930 (49.0) .610 (15.5) 1.960 (49.8) 14 15 .645 (16.4) 2.020 (51.3) .700 (17.8) 2.030 (51.6) 16 17 .738 (18.7) 2.130 (54.1) .885 (22.5) 2.120 (53.8) 18 19 .926 (23.5) 2.320 (58.9) .975 (24.8) 2.290 (58.2) 20 21 .926 (23.5) 2.320 (58.9) .975 (24.8) 2.290 (58.2) 22 23 1.020 (25.9) 2.470 (62.7) 1.125 (28.6) 2.400 (61.0) 24 25 1.020 (25.9) 2.470 (62.7) 1.125 (28.6) 2.400 (61.0) 28 1.145 (29.1) 2.520 (64.0) 1.225 (31.1) 2.570 (65.3) 32 1.207 (30.7) 2.620 (66.5) 1.575 (40.0) 2.820 (71.6) 36 1.238 (31.4) 2.710 (68.8) 1.775 (45.1) 2.820 (71.6) TABLE IV Dash Conduit K Dimension (Ref) L Dimension (Ref) M N Max No. Size (Ref.) Min Max Min Max Max Wrench Flats 01 3/8 .484 (12.3) .504 (12.8) .690 (17.5) .710 (18.0) 1.155 (29.3) 1.000 (25.4) 02 1/2 .622 (15.8) .642 (16.3) .820 (20.8) .840 (21.3) 1.282 (32.6) 1.125 (28.6) 03 3/4 .820 (20.8) .840 (21.3) 1.030 (26.2) 1.050 (26.7) 1.531 (38.9) 1.375 (34.9) 04 1 1.041 (26.4) 1.066 (27.1) 1.290 (32.8) 1.315 (33.4) 1.781 (45.2) 1.625 (41.3) 05 1 1/4 1.380 (35.1) 1.410 (35.8) 1.630 (41.4) 1.660 (42.2) 2.218 (56.3) 2.062 (52.4) 06 1 1/2 1.575 (40.0) 1.600 (40.6) 1.875 (47.6) 1.900 (48.3) 2.468 (62.7) 2.312 (58.7) 07 2 2.020 (51.3) 2.045 (51.9) 2.350 (59.7) 2.375 (60.3) 3.031 (77.0) 2.875 (73.0) 1. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 2. Metric dimensions (mm) are indicated in parentheses. 3. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Consult factory for shorter lengths on straight backshells. 5. O-Ring not supplied with Connector Designator A. 6. Sealtite is a trademark of Anaconda Corp. 6/1999 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 42-3 42