447BS426B2220-4A Glenair

447 447-426 EMI/RFI Non-Environmental Band-in-a-Can Backshell with Cable Clamp Strain-Relief Direct Coupling - Standard Profile 447 F S 426 NF 16 12-8 K P Product Series Polysulfide (Omit for none) CONNECTOR DESIGNATORS Connector Designator B = Band K = Precoiled Band * Angle and Profile (Omit for none) A-B -C-D-E-F H = 45 J = 90 Length: S only G-H-J-K-L-S S = Straight (1/2 inch increments, e.g. 8 = 4.000 inches) * Conn. Desig. B See Note 4 Basic Part No. DIRECT COUPLING Cable Entry (Table V) Finish (Table II) Shell Size (Table I) Length .060 (1.52) .500 (12.7) Min. Order Length 2.5 inch Max A Thread (Note 3) (Table I) Length .060 (1.52) Min. Order Length 3.0 Inch (See Note 3) B Cable K ** L ** Range (Table I) STYLE 2 ** (Table V) (STRAIGHT See Note 1) J J G E (Table III) (Table (Table III) (Table IV) IV) B F (Table IV) B (Table I) (Table I) H (Table IV) Termination Area Free of Cadmium Knurl or Ridges Mfr's Option Band Option (K Option Shown - Polysulfide Stripes See Note 5) P Option 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 447 - Page 12447-426 EMI/RFI Non-Environmental Band-in-a-Can Backshell with Cable Clamp Strain-Relief Direct Coupling - Standard Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: FRONT ADAPTER TABLE IV: ELBOW DIMENSIONS J Max - Conn. Designator Elbow E F G H Shell A-E-F Size Max Max Max Max Size J-H-L-S D-B-G-K C 10/12 .664 (16.9) 1.410 (35.8) .810 (20.6) 1.550 (39.4) 08/09 1.180 (30.0) 1.250 (31.8) 14 .688 (17.5) 1.430 (36.3) .870 (22.1) 1.610 (40.9) 10/11 1.180 (30.0) 1.250 (31.8) 16/18 .732 (18.6) 1.480 (37.6) .980 (24.9) 1.740 (44.2) 12/13 1.180 (30.0) 1.250 (31.8) 1.735 (44.1) 20 .748 (19.0) 1.490 (37.8) 1.020 (25.9) 1.760 (44.7) 14/15 1.180 (30.0) 1.250 (31.8) 1.915 (48.6) 22 .773 (19.6) 1.510 (38.4) 1.080 (27.4) 1.820 (46.2) 16/17 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 24 .800 (20.3) 1.550 (39.4) 1.140 (29.0) 1.900 (48.3) 18/19 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 28 .823 (20.9) 1.580 (40.1) 1.200 (30.5) 1.970 (50.0) 20/21 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 32 1.041 (26.4) 1.750 (44.5) 1.480 (37.6) 2.210 (56.1) 22/23 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 24/25 1.380 (35.0) 1.560 (39.6) 1.915 (48.6) 28/29 1.610 (40.9) 1.560 (39.6) 1.915 (48.6) 32/33 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 36 1.610 (40.9) 1.750 (44.5) 1.915 (48.6) 40 1.610 (40.9) 2.190 (55.6) 1.915 (48.6) TABLE V: CABLE RANGE Dash K L Cable Range No. .030 (.8) Max Min Max 10 .220 (5.6) 1.000 (25.4) .130 (3.3) .250 (6.4) 12 .310 (7.9) 1.250 (31.8) .250 (6.4) .380 (9.7) 14 .440 (11.2) 1.340 (34.0) .310 (7.9) .440 (11.2) 16 .560 (14.2) 1.470 (37.3) .375 (9.5) .630 (16.0) 18 .630 (16.0) 1.560 (39.6) .560 (14.2) .690 (17.5) 20 .750 (19.1) 1.620 (41.1) .630 (16.0) .750 (19.1) 22 .880 (22.4) 1.750 (44.5) .750 (19.1) .880 (22.4) 24 1.000 (25.4) 1.870 (47.5) .880 (22.4) 1.000 (25.4) 28 1.060 (26.9) 1.970 (50.0) 1.000 (25.4) 1.130 (28.7) 32 1.190 (30.2) 2.090 (53.1) 1.130 (28.7) 1.250 (31.8) 1. When maximum cable entry (page 22) is exceeded, Style 2 will be supplied. (Function S only). 2. Metric dimensions (mm) are indicated in parentheses. 3. Consult factory for shorter lengths on straight backshells. 4. When using Connector Designator B refer to pages 18 and 19 for part number development. 5. Backshells supplied with 600-052-* band, see Glenair Series 600 Tool Catalog for installation. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales@glenair.com Series 447 - Page 13 447