450DA001N14 Glenair

450-001 Qwik-Ty Strain Relief - Connector Designator D Direct Coupling (Straight) Rotatable Coupling (45 and 90 Elbows) 450 D S 001 M 16 G Product Series Ground Lug (Omit for none) CONNECTOR DESIGNATOR Connector Designator Shell Size (Table I) D Angle and Profile Finish (Table II) A = 90 B = 45 Basic Part Number S = Straight A Thread G H (Table I) F D D B (Table I) E (Table I) (Table I) J STRAIGHT .140 (3.6) Dia (Typ.) E DIRECT COUPLING Use MS3367-1 Tie Ground Lug E Strap or Equivalent (Optional) (Typical) 45 90 ROTATABLE COUPLING ROTATABLE COUPLING See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: DIMENSIONS Shell E F G H J Size Cable Entry Max Max Max Max 08 .275 (7.0) 1.400 (35.6) 1.850 (47.0) 1.240 (31.5) .880 (22.4) 10 .402 (10.2) 1.400 (35.6) 1.850 (47.0) 1.240 (31.5) .940 (23.9) .516 (13.1) 1.400 (35.6) 1.850 (47.0) 1.240 (31.5) 12 1.000 (25.4) 14 .651 (16.5) 1.610 (40.9) 2.350 (59.7) 1.230 (31.2) 1.320 (33.5) 16 .766 (19.5) 1.610 (40.9) 2.350 (59.7) 1.230 (31.2) 1.380 (35.1) 18 .872 (22.1) 1.610 (40.9) 2.440 (62.0) 1.260 (32.0) 1.460 (37.1) 20 .997 (25.3) 1.680 (42.7) 2.510 (63.8) 1.260 (32.0) 1.510 (38.4) 1.125 (28.6) 1.680 (42.7) 2.510 (63.8) 1.260 (32.0) 22 1.560 (39.6) 24 1.247 (31.7) 1.770 (45.0) 2.650 (67.3) 1.260 (32.0) 1.630 (41.4) 1. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 2. Metric dimensions (mm) are indicated in parentheses. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 45 - Page 3 45How to Order Reference Information Standard Materials and Finishes TABLE II - STANDARD FINISHES GLENAIR M85049 SYMBOL SYMBOL REFERENCE ONLY FINISH SPECIFICATION(S) A Cadmium Plate, Bright AMS-QQ-P-416, Type I, Class 2 B Cadmium Plate, Olive Drab AMS-QQ-P-416, Type II, Class 3 C* Anodize, Black AMS-A-8625, Type II, Class 2 A G* Hard Coat, Anodic AMS-A-8625, Type III, Class 1 J Iridite, Gold Over Cadmium Plate Over MIL-C-5541, Class 3 AMS-QQ-P-416, Type II, Electroless Nickel Class 3 over AMS-C-26074, Class 4, Grade B LF Cadmium Plate, Bright Over 1000 Hour Corrosion Resistance Electroless Nickel Electroless Nickel AMS-C-26074, Class 4, Grade B M N N Cadmium Plate, Olive Drab Over AMS-QQ-P-416, Type II, Class 3 over Electroless Nickel Electroless Nickel AMS-C-26074 NC Zinc Cobalt, Dark Olive Drab 96 Hour Corrosion Resistance NF Cadmium Plate, Olive Drab Over 1000 Hour Corrosion Resistance W Electroless Nickel T Cadmium Plate, Bright Over AMS-QQ-P-416, Type I, Class 3 Electroless Nickel ASTMB 733-90, SC2, Type I, Class 5, MIL-C-26074*** Cadmium Plate, Black AMS-QQ-P-416, Type II, Class 3 U ZU** Cadmium Plate, Black AMS-QQ-P-416, Type II, Class 3 Zinc-Nickel Alloy, Olive Drab ASTMB 841-91, Over Electroless Nickel 1000 Hour Salt ZN Spray * Anodize finish not suitable for EMI Shielding or grounding applications. ** Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes. The following standard materials are used for the majority of Glenair the elements used in Glenair s general accessory products. Contact backshells and connector accessories. However, backshell compo- Glenair for applicable specifications on items not listed below. nents are not limited to those items listed, but are representative of STANDARD MATERIALS - BACKSHELLS AND ACCESSORIES COMPONENT MATERIAL SPECIFICATION Aluminum AMS-QQ-A-200 Machined components: such as backshell bodies, fabricated elbows, protective covers, ASTMB221, 209 rotatable couplers, dummy stowage receptacles, lock nuts, G-spring support rings, EMI ground rings, grommet followers, etc. Die cast components: such as angular backshells, strain relief backshells, strain relief Aluminum QQ-A-591 bodies, strain relief saddles, special EMI ground rings, etc. ASTMB85, 26 Backshells or strain reliefs: available in optional corrosion resisting steel and Corrosion Resisting Steel ASTMA582 (300 Series) hardware: such as screws, washers, rivets, wire rope, sash chain, band straps, etc. AMS-QQ-S-763 Elastomeric seals: such as O-rings, cable jacket seals, grommets, etc. Silicone ZZ-R-765, MIL-R-25988 Teflon TFE Anti-friction and thrust washers Corrosion Resistant N/A Anti-rotation device Material NOTES BODY STRAP On all length callouts, tolerance is .060 unless otherwise Glenair offers an optional stainless steel body strap for specified. attaching protective covers as illustrated. To specify body strap, add suffix letter C to the end of the part number. For Unless otherwise specified, the following other dimensional example 360AS001M1610M6C. tolerances will apply: .xx = .03 (0.8) .xxx = .015 (0.4) Lengths = .060 (1.52) Angles = 5 Metric dimensions (mm) are indicated in parentheses NOTE: For your convenience these tables have 2-56 Screw and Nut been reproduced inside the back cover fold-out. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com 14