463HA001NF1304F Glenair

463 463-001 EMI/RFI Environmental G-Spring Backshell with Strain Relief Rotatable Coupling - Low Profile 463 F S 001 M 16 05 F 6 Product Series Length: S only CONNECTOR (1/2 inch increments: DESIGNATORS Connector e.g. 6 = 3 inches) Designator A-F-H-L-S Strain Relief Style (F, G) Angle and Profile ROTATABLE A = 90 Cable Entry (Table IV) COUPLING B = 45 S = Straight Shell Size (Table I) Basic Part No. Finish (Table II) 1.22 Length * Length .060 (1.52) A Thread (31.0) Minimum Order Length 2.0 Inch (Table I) Max (See Note 5) C Typ. Cable M Range (Table I) (Table IV) * Length .060 (1.52) Shown with Style F STYLE 2 Strain Relief Minimum Order Length 1.5 Inch (STRAIGHT (See Note 5) See Note 1) E G .88 (22.4) Max (Table III) (Table III) F (Table III) H STYLE 2 (Table III) (45 & 90 See Note 1) 469-001-XX Shield Support Ring (order separately) is recommended for use in all G-Spring backshells (see page 463-8) Shown with Style G Shown with Style F Strain Relief Strain Relief N (Table IV) 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 463 - Page 2463-001 EMI/RFI Environmental G-Spring Backshell with Strain Relief Rotatable Coupling - Low Profile See inside back cover fold-out or pages 13 and 14 for Tables I and II. TABLE III: ELBOW DIMENSIONS Shell Size E F G H Conn. Desig. H A-F-L-S Max Max Max Max 09 08 .413 (10.5) 1.720 (43.7) .500 (12.7) 1.670 (42.4) 10 11 .520 (13.2) 1.720 (43.7) .595 (15.1) 1.790 (45.5) 13 12 .582 (14.8) 1.780 (45.2) .610 (15.5) 1.810 (46.0) 14 15 .645 (16.4) 1.870 (47.5) .700 (17.8) 1.880 (47.8) 17 16 .738 (18.7) 1.980 (50.3) .885 (22.5) 1.970 (50.0) 19 18 .926 (23.5) 2.170 (55.1) .975 (24.8) 2.140 (54.4) 20 21 .926 (23.5) 2.170 (55.1) .975 (24.8) 2.140 (54.4) 23 22 1.020 (25.9) 2.320 (58.9) 1.125 (28.6) 2.250 (57.2) 24 25 1.020 (25.9) 2.320 (58.9) 1.125 (28.6) 2.250 (57.2) 28 1.145 (29.1) 2.370 (60.2) 1.225 (31.1) 2.420 (61.5) 32 1.207 (30.7) 2.470 (62.7) 1.575 (40.0) 2.670 (67.8) 36 1.238 (31.4) 2.560 (65.0) 1.775 (45.1) 2.670 (67.8) TABLE IV: CABLE ENTRY Dash M N Cable Range Min Max No. Max Max .125 (3.2) .250 (6.4) 01 .843 (21.4) .625 (15.9) .156 (4.0) .375 (9.5) 02 .968 (24.6) .750 (19.1) .250 (6.4) .438 (11.1) 03 1.046 (26.6) .875 (22.2) 04 1.156 (29.4) 1.000 (25.4) .280 (7.1) .500 (12.7) .375 (9.5) .625 (15.9) 05 1.218 (30.9) 1.125 (28.6) .500 (12.7) .750 (19.1) 06 1.343 (34.1) 1.250 (31.8) .625 (15.9) .875 (22.2) 07 1.468 (37.3) 1.375 (34.9) .750 (19.1) 1.000 (25.4) 08 1.593 (40.5) 1.500 (38.1) 09 1.718 (43.6) 1.625 (41.3) .875 (22.2) 1.125 (28.6) 1.000 (25.4) 1.250 (31.8) 10 1.843 (46.8) 1.750 (44.5) 1.125 (28.6) 1.375 (34.9) 11* 2.187 (55.5) 1.875 (47.6) 1.250 (31.8) 1.500 (38.1) 12* 2.312 (58.7) 2.000 (50.8) 1.375 (34.9) 1.625 (41.3) 13* 2.437 (61.9) 2.125 (54.0) 14* 2.546 (64.7) 2.250 (57.2) 1.500 (38.1) 1.750 (44.5) * Consult factory for availability 1. Shield Support Ring (469-001-XX) is recommended for use in all G-Spring backshells (see page 463-8). 2. When maximum cable entry (page 21) is exceeded, Style 2 will be supplied. Dimensions E, F, G and H will not apply. Please consult factory. 3. Metric dimensions (mm) are indicated in parentheses. 4. Cable range is defined as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 5. Consult factory for shorter lengths on straight backshells. 6. O-Ring not supplied with Connector Designator A. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 463 - Page 3 463