ARINC 600 Backshells 527-025 Strain Relief Backshell for Size 2 ARINC 600 Series Connectors 527-025 NF P1 A08 C12 D12 t S S = Safety Wire Holes on Hex Basic Part No. Locknuts, Omit For None Finish (Table II) Termination Style (Note 2) Connector Designator (Table III) D = 2 Ring, T = 3 Ring Entry Location (A, B, C, D, E, F, G, H, J, K, L) and Dash No. (Table I), 3 Entry Combinations Max 2.54 (64.5) Max 1.79 (45.5) 1.082 (27.5) 1.067 (27.1) 2.09 (53.1) L Entry A Entry K Entry D Entry 5.355 (136.0) 5.345 (135.8) A B Entry E Entry J Entry 5.61 3.770 (95.8) (142.5) 3.760 (95.5) 3 Ring Term. Shown (Note 2) C Entry Cable Range 2.004 Typ. F Entry (50.9) H 1.258 1.994 Entry (32.0) (50.6) B Typ. 1.248 (31.7) 2 Ring Term125 (3.2) Dia Shown 10 Places G Entry (Note 2) .168 (4.3) .158 (4.0) 1.415 (35.9) Typ. 1.405 (35.7) Metric dimensions (mm) are indicated in parentheses. 2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com F-6527-025 Strain Relief Backshell for Size 2 ARINC 600 Series Connectors t ABLE I: CABLE ENtRY Cable Range Dash A B No. Max Max Min Max 03 .760 (19.3) .844 (21.4) .157 (4.0) .250 (6.4) 04 .760 (19.3) .906 (23.0) .187 (4.7) .312 (7.9) 06 .760 (19.3) 1.093 (27.8) .281 (7.1) .437 (11.1) 08 .760 (19.3) 1.187 (30.1) .344 (8.7) .562 (14.3) 10 .760 (19.3) 1.281 (32.5) .375 (9.5) .625 (15.9) 12 .760 (19.3) 1.500 (38.1) .438 (11.1) .750 (19.1) 16 1.073 (27.3) 1.719 (43.7) .562 (14.3) .938 (23.8) t ABLE II: FINISH oPtIoNS Symbol Finish Symbol Finish B Cadmium Plate/Olive Drab NC Zinc Cobalt/Dark Olive Drab C* Black Anodize NF Cadmium Plate/Olive Drab over G* Anodic Hard Coat Electroless Nickel J Gold Iridite over Cadmium Plate T Cadmium Plate/Bright over over Electroless Nickel Electroless Nickel LF Cadmium Plate/Bright over U** Cadmium Plate/Black Electroless Nickel ZN Zinc-Nickel Alloy/Olive Drab M Electroless Nickel *Anodize finish is not suitable for EMI shielding or grounding applications. N Cadmium Plate/Olive Drab over **Applicable to corrosion resisting steel backshells and Electroless Nickel accessories. Consult factory for other available finishes. t ABLE III: CoNNECtoR DESIGNA toR ARINC 600 series connector backshells are designed to replace the insert retainer plates. Due to non-standard modifications by the connector manufacturer, the backshell may require special design alterations to mate properly. The following should be used to determine if a backshell modification is required. Prior to ordering, 1. Metric dimensions (mm) are indi- consult factory with connector part numbers not shown to ensure a cated in parentheses. proper fit. 2. Designate Symbol T (3 ring ter- mination) for termination of individ- Connector ual and overall braid. Designate Designator Connector Description symbol D (2 ring termination) for P All Manufacturers Plug and Receptacle Shells, Except termination of individual or overall for Those Listed Below (Prior to ordering, consult factory braid. with connector part numbers not listed below to ensure 3. Material/Finish: a proper fit.) Backshell, Nuts, Clamps, Ferrule P1 = Al Alloy/See Table II Cannon BKAD****322 Series Plug Hardware = SST/Passivate P2 Cannon/Radiall Environmental Plug P3 Cannon/Boeing BACC 66 Plug P5 Radiall/Boeing BACC66 Plug P6 Cannon BKAC & BKAE XXX322 Series Environmental Plug 2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com F-7 ARINC 600 Backshells