MIL-DTL-24308 D-Subminiature 550-005 EMI/RFI D-Subminiature Split Backshell Lamp-Thread Type Shield Termination With Shrink Boot Groove 550 T 005 M 2 F0 B 1 F 02 Basic Part No. Cable Entry Dash No. (Table II) 1. Metric dimensions Cable Entry Style E = Strain Relief, G = Gland Nut (mm) are indicated in T = Top parentheses. S = Side 0 = Without EMI Gasket, 2. DO NOT USE E = End 1 = With EMI Gasket CONNECTORS WITH FLOAT Basic Part Number Jackscrew Type (Page A-4) MOUNTINGS. 3. Overall shield thick- Finish Symbol (Page 3) Receptacle Mounting (Right Page) ness range: CC = Cable-to-Cable Mounting Max to .031 (0.8) Shell Size (Table I) F0 = Front Mounting R1-R9 = Rear Mounting 1.060 H (26.9) Max Cable Range Shell I.D. S 1.280 (32.5) SIDE Max ENTRY Style E Strain Relief 1.060 (26.9) Max .573 (14.6) .140/.130 (3.6/3.3) .079 (2.01) T TOP Shell J ENTRY I.D. E END ENTRY Style G Gland Nut EMI Gasket (Optional) Accomodates MS3109-MS3117, M85049/68 Lipped Type Shrink Boots TABLE I: SHELL SIZE & ENTRY TABLE II: BACKSHELL DIMENSIONS & CABLE Dash H J Cable Range Coml Entry Style Entry Style No. Max Max Min Max Shell Shell Size T (Ref) E 02 .968 (24.6) .515 (13.1) .125 (3.2) .250 (6.4) Size Ref Shell I.D. Shell I.D. 03 1.046 (26.6) .640 (16.3) .250 (6.4) .375 (9.5) 1 E/09 .250 (6.4) .375 (9.5) 04 1.156 (29.4) .765 (19.4) .312 (7.9) .500 (12.7) 2 A/15 .375 (9.5) .375 (9.5) 05 1.218 (30.9) .920 (23.4) .437 (11.1) .625 (15.9) 3 B/25 .475 (12.1) .475 (12.1) 06 1.343 (34.1) 1.015 (25.8) .562 (14.3) .750 (19.1) 4 C/37 .475 (12.1) .475 (12.1) 07* 1.468 (37.3) 1.140 (29.0) .687 (17.4) .875 (22.2) 5 D/50 .575 (14.6) .575 (14.6) 08* 1.593 (40.5) 1.265 (32.1) .812 (20.6) 1.000 (25.4) 6 * F/104 1.000 (25.4) n/a * Shell Size 6 Available in Top Entry Only. * Available in Shell Size 6 Only 2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com A-18D-Subminiature Split Backshells Standard Dimensions Jackscrew Types B, D, P Termination E, H, K Type (Page A-4) F S - SIDE Jackscrew ENTRY Types B, D, E R E, H, K (Page A-4) Jackscrew Types B, D, H F and J Only (Page A-4) T - TOP Shrink Sleeve (As Required) ENTRY E Termination Type A E - END D ENTRY G C B E .12 (3.0) Ref. A CoMMoN CoNNECT oR/SHELL INTERFACE & BACKSHELL DIMENSIoNS Coml A B D Shell Shell Size Max Max C Ref005 (.1) P R Ref Size Ref 1.393 (35.4) .624 (15.8) .312 (7.9) .984 (25.0) .730 (18.5) .719 (18.3) 1 E/09 1.706 (43.3) .624 (15.8) .312 (7.9) 1.312 (33.3) 1.050 (26.7) .719 (18.3) 2 A/15 2.265 (57.5) .624 (15.8) .312 (7.9) 1.852 (47.0) 1.594 (40.5) .938 (23.8) 3 B/25 2.900 (73.7) .624 (15.8) .312 (7.9) 2.500 (63.5) 2.240 (56.9) .938 (23.8) 4 C/37 2.800 (71.1) .750 (19.1) .375 (9.5) 2.406 (61.1) 2.140 (54.4) .938 (23.8) 5 D/50 2.900 (73.7) .844 (21.4) .422 (10.7) 2.500 (63.5) 2.240 (56.9) 1.094 (27.8) 6 F/104 CABLE MouNTING AND BACKSHELL DIMENSIoNS Panel G + .031 (0.79) Dash F + .031 (0.79) Thickness E No. Sizes 1 & 2 Sizes 3 - 5 Size 6 Sizes 1 & 2 Sizes 3 - 5 n/a .174 (4.4) CC 1.451 (36.9) 1.671 (42.4) 1.820 (46.2) 1.583 (40.2) 1.831 (46.5) n/a .343 (8.7) F0 1.625 (41.3) 1.844 (46.8) 2.000 (50.8) 1.750 (44.5) 2.000 (50.8) .031 (.8) .247 (6.3) R1 1.525 (38.7) 1.745 (44.3) 1.890 (48.0) 1.656 (42.1) 1.904 (48.4) .047 (1.2) .231 (5.9) R2 1.509 (38.3) 1.728 (43.9) 1.875 (47.6) 1.640 (41.7) 1.888 (48.0) .062 (1.6) .216 (5.5) R3 1.500 (38.1) 1.720 (43.7) 1.860 (47.2) 1.625 (41.3) 1.873 (47.6) .093 (2.4) .185 (4.7) R4 1.470 (37.3) 1.690 (42.9) 1.829 (46.5) 1.594 (40.5) 1.842 (46.8) .104 (2.6) .174 (4.4) R5 1.451 (36.9) 1.671 (42.4) 1.820 (46.2) 1.583 (40.2) 1.831 (46.5) .125 (3.2) .153 (3.9) R6 1.430 (36.3) 1.650 (41.9) 1.798 (45.7) 1.563 (39.7) 1.811 (46.0) .156 (4.0) .125 (3.2) R7 1.400 (35.6) 1.620 (41.1) 1.767 (44.9) 1.531 (38.9) 1.781 (45.2) .135 (3.4) .140 (3.6) R8 1.417 (36.0) 1.637 (41.6) 1.805 (45.8) 1.550 (39.4) 1.798 (45.7) .188 (4.8) .094 (2.4) R9 1.368 (34.7) 1.590 (40.4) 1.740 (44.2) 1.500 (38.1) 1.750 (44.5) Metric dimensions (mm) are indicated in parentheses. 2011 Glenair, Inc. Printed in U.S.A. CAGE Code 06324 GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com A-19 MIL-DTL-24308 D-Subminiature