MIL-DTL-24308 D-Subminiature 550-008 EMI/RFI D-Subminiature Split Backshell G-Spring Shield Termination with Strain-Relief 550 T 008 M 2 F0 B 1 F 02-04 J Basic Part No. Inner Support Ring Dash No. (Part No. 469-001 - Table III) Omit for Cable Entry Style none (Ring Not Shown) T = Top, S = Side, E = End Cable Entry Dash No. (Table II) Basic Part Number F = Strain Relief, G = Gland Nut Finish Symbol (Page 3) 0 = Without EMI Gasket, T 1 = With EMI Gasket Shell Size (Table I) ToP Jackscrew Type (Page A-4) ENTRY Receptacle Mounting (Right Page) 1.250 (31.8) Max CC = Cable-to-Cable Mounting F0 = Front Mounting 1.500 R1-R9 = Rear Mounting EMI Gasket (Optional) (38.1) Max K E END Cable ENTRY Range S Shell I.D. SIDE Style G ENTRY Gland Nut Style F Strain Relief TABLE III: SuPPoRT RING Dash I.D. o.D. TABLE I: SHELL SIZE & ENTRY No010 (.3) .010 (.3) Coml Entry Style Entry Style 01 .187 (4.7) .227 (5.8) 1. Metric Shell Shell Size T (Ref) E 02 .218 (5.5) .258 (6.6) dimensions (mm) Size Ref Shell I.D. Shell I.D. 03 .250 (6.4) .290 (7.4) are indicated in 1 E/09 .250 (6.4) .375 (9.5) 04 .281 (7.1) .321 (8.2) parentheses. 2 A/15 .375 (9.5) .375 (9.5) 05 .312 (7.9) .352 (8.9) 2. Do NoT uSE 3 B/25 .475 (12.1) .475 (12.1) 06 .343 (8.7) .383 (9.7) CoNNECT oRS 4 C/37 .475 (12.1) .475 (12.1) 07 .375 (9.5) .415 (10.5) WITH FLoAT 5 D/50 .575 (14.6) .575 (14.6) 08 .406 (10.3) .446 (11.3) MouNTINGS. 6* F/104 1.000 (25.4) n/a 09 .438 (11.1) .478 (12.1) * Shell Size 6 Available in Top Entry Only. 10 .468 (11.9) .508 (12.9) 11 .500 (12.7) .540 (13.7) TABLE II: BACKSHELL DIMENSIoNS & CABLE 12 .531 (13.5) .571 (14.5) Dash J Dim K Cable Range 13 .562 (14.3) .602 (15.3) No. Max Max Min Max 14 .593 (15.1) .633 (16.1) 02 .968 (24.6) .781 (19.8) .125 (3.2) .250 (6.4) 15 .625 (15.9) .665 (16.9) 03 1.046 (26.6) .906 (23.0) .250 (6.4) .375 (9.5) 16 .656 (16.7) .696 (17.7) 04 1.156 (29.4) 1.031 (26.2) .312 (7.9) .500 (12.7) 17 .687 (17.4) .727 (18.5) 05 1.218 (30.9) 1.156 (29.4) .437 (11.1) .625 (15.9) 18 .718 (18.2) .758 (19.3) 06 1.343 (34.1) 1.281 (32.5) .562 (14.3) .750 (19.1) 19 .750 (19.1) .790 (20.1) 07* 1.468 (37.3) 1.406 (35.7) .687 (17.4) .875 (22.2) 20 .781 (19.8) .821 (20.9) 08* 1.593 (40.5) 1.531 (38.9) .812 (20.6) 1.000 (25.4) 21 .812 (20.6) .852 (21.6) Consult Factory For Larger Sizes * Available in Shell Size 6 Only 2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com A-24D-Subminiature Split Backshells Standard Dimensions Jackscrew Types B, D, P Termination E, H, K Type (Page A-4) F S - SIDE Jackscrew ENTRY Types B, D, E R E, H, K (Page A-4) Jackscrew Types B, D, H F and J Only (Page A-4) T - TOP Shrink Sleeve (As Required) ENTRY E Termination Type A E - END D ENTRY G C B E .12 (3.0) Ref. A CoMMoN CoNNECT oR/SHELL INTERFACE & BACKSHELL DIMENSIoNS Coml A B D Shell Shell Size Max Max C Ref005 (.1) P R Ref Size Ref 1.393 (35.4) .624 (15.8) .312 (7.9) .984 (25.0) .730 (18.5) .719 (18.3) 1 E/09 1.706 (43.3) .624 (15.8) .312 (7.9) 1.312 (33.3) 1.050 (26.7) .719 (18.3) 2 A/15 2.265 (57.5) .624 (15.8) .312 (7.9) 1.852 (47.0) 1.594 (40.5) .938 (23.8) 3 B/25 2.900 (73.7) .624 (15.8) .312 (7.9) 2.500 (63.5) 2.240 (56.9) .938 (23.8) 4 C/37 2.800 (71.1) .750 (19.1) .375 (9.5) 2.406 (61.1) 2.140 (54.4) .938 (23.8) 5 D/50 2.900 (73.7) .844 (21.4) .422 (10.7) 2.500 (63.5) 2.240 (56.9) 1.094 (27.8) 6 F/104 CABLE MouNTING AND BACKSHELL DIMENSIoNS Panel G + .031 (0.79) Dash F + .031 (0.79) Thickness E No. Sizes 1 & 2 Sizes 3 - 5 Size 6 Sizes 1 & 2 Sizes 3 - 5 n/a .174 (4.4) CC 1.451 (36.9) 1.671 (42.4) 1.820 (46.2) 1.583 (40.2) 1.831 (46.5) n/a .343 (8.7) F0 1.625 (41.3) 1.844 (46.8) 2.000 (50.8) 1.750 (44.5) 2.000 (50.8) .031 (.8) .247 (6.3) R1 1.525 (38.7) 1.745 (44.3) 1.890 (48.0) 1.656 (42.1) 1.904 (48.4) .047 (1.2) .231 (5.9) R2 1.509 (38.3) 1.728 (43.9) 1.875 (47.6) 1.640 (41.7) 1.888 (48.0) .062 (1.6) .216 (5.5) R3 1.500 (38.1) 1.720 (43.7) 1.860 (47.2) 1.625 (41.3) 1.873 (47.6) .093 (2.4) .185 (4.7) R4 1.470 (37.3) 1.690 (42.9) 1.829 (46.5) 1.594 (40.5) 1.842 (46.8) .104 (2.6) .174 (4.4) R5 1.451 (36.9) 1.671 (42.4) 1.820 (46.2) 1.583 (40.2) 1.831 (46.5) .125 (3.2) .153 (3.9) R6 1.430 (36.3) 1.650 (41.9) 1.798 (45.7) 1.563 (39.7) 1.811 (46.0) .156 (4.0) .125 (3.2) R7 1.400 (35.6) 1.620 (41.1) 1.767 (44.9) 1.531 (38.9) 1.781 (45.2) .135 (3.4) .140 (3.6) R8 1.417 (36.0) 1.637 (41.6) 1.805 (45.8) 1.550 (39.4) 1.798 (45.7) .188 (4.8) .094 (2.4) R9 1.368 (34.7) 1.590 (40.4) 1.740 (44.2) 1.500 (38.1) 1.750 (44.5) Metric dimensions (mm) are indicated in parentheses. 2011 Glenair, Inc. Printed in U.S.A. CAGE Code 06324 GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com A-25 MIL-DTL-24308 D-Subminiature