MIL-DTL-24308 D-Subminiature 557-196 D-Subminiature Solid Banding Backshell with Elliptical Entry 557 T 196 M 2 R1 B 1-04 B Product Series B = Band Supplied (600-052), Omit for None Cable Entry Style Dash No. (Table III) T = Top 0 = Without EMI Gasket, Basic Part Number 1 = With EMI Gasket Finish Symbol (Page 3) Jackscrew Type (Page A-4) Shell Size (Table I) Receptacle Mounting (Table II) F0 = Front Mounting R1-R7 = Rear Mounting F G J H .44 (11.2) .045 1.50 (1.1) (38.1) Typ. E Connector Retaining Spring RFI/EMI Gasket Optional A D 4-40 UNC Thread (2 Places) C B 2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com A-84557-196 D-Subminiature Solid Banding Backshell with Elliptical Entry TABLE I: SHELL SIZE & CONNECTOR INTERFACE DIMENSIONS Coml Available Dash Shell Size D Shell No. Ref A MAX B MAX C Ref005 (.1) Size Table III E/09 1.393 (35.4) .624 (15.8) .312 (7.9) .984 (25.0) 1 01-03 A/15 1.706 (43.3) .624 (15.8) .312 (7.9) 1.312 (33.3) 2 01-05 B/25 2.265 (57.5) .624 (15.8) .312 (7.9) 1.852 (47.0) 3 01-10 C/37 2.900 (73.7) .624 (15.8) .312 (7.9) 2.500 (63.5) 4 01-12 D/50 2.800 (71.1) .750 (19.1) .375 (9.5) 2.406 (61.1) 5 01-11 & 13 F/104 2.900 (73.7) .844 (21.4) .422 (10.7) 2.500 (63.5) 6 01-14 TABLE II: RECEPTACLE MOUNTING Dash Panel No. Thickness E R1 .031 (.8) .247 (6.3) R2 .047 (1.2) .231 (5.9) R3 .062 (1.6) .216 (5.5) R4 .093 (2.4) .185 (4.7) R5 .104 (2.6) .174 (4.4) R6 .125 (3.2) .153 (3.9) R7 .156 (4.0) .125 (3.2) F0 N/A .305 (7.7) TABLE III: CABLE ENTRY Dash F G H J No250 (6.4) .375 (9.5) 250 (6.4) .375 (9.5) 01 .250 (6.4) .375 (9.5) .375 (9.5) .500 (12.7) 02 .312 (7.9) .438 (11.1) .500 (12.7) .625 (15.9) 03 .312 (7.9) .438 (11.1) .625 (15.9) .750 (19.1) 04 .312 (7.9) .438 (11.1) .750 (19.1) .875 (22.2) 05 .312 (7.9) .438 (11.1) .875 (22.2) 1.000 (25.4) 06 .312 (7.9) .438 (11.1) 1.000 (25.4) 1.125 (28.6) 07 .375 (9.5) .500 (12.7) 1.125 (28.6) 1.250 (31.8) 08 .375 (9.5) .500 (12.7) 1.250 (31.8) 1.375 (34.9) 09 .375 (9.5) .500 (12.7) 1.375 (34.9) 1.500 (38.1) 10 .437 (11.1) .562 (14.3) 1.452 (36.9) 1.577 (40.1) 11 .437 (11.1) .562 (14.3) 2.100 (53.3) 2.225 (56.5) 12 .550 (14.0) .675 (17.1) 2.000 (50.8) 2.125 (54.0) 13 .615 (15.6) .740 (18.8) 2.100 (53.3) 2.225 (56.5) 14 1. Metric dimensions (mm) are indicated in parentheses. 2. DO NOT USE CONNECTORS WITH FLOAT MOUNTINGS. 3. For front mount, mating connector must be mounted to panel using M24308/26 female screwlocks. For rear mount, use Glenair GK134. 2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com A-85 MIL-DTL-24308 D-Subminiature