600-146-03 Glenair

MightMighty Mouse y Mouse Cwith 8 Contacts and Tontacoolsts 1.00 1.50 Series 80 Mighty Mouse Contacts and Tools Jam Nut Tightening Tools, Connector Holding Fixtures and Mighty Mouse Recommended Torque Values, Spanner tool for tightening Series 80 jam nuts Use these tools to tighten Series 80 jam nuts. 1/4 or 3/8 square drive for use with torque wrenches. Heat- treated steel, nickel plated. A Spanner Tool Part Number Shell Series 804 Series 804 Series 800 Series 801 Series 803 Series 805 Size Style 07 Style 00 5 600-146-01 600-146-02 600-137-05 600-146-03 600-147-5 6 600-146-02 600-146-03 600-137-06 600-146-04 600-147-6 7 600-146-03 600-146-05 600-137-07 600-146-06 600-147-7 8 600-146-04 600-146-05 600-137-09 600-146-06 600-147-7 600-154-08 9 600-146-05 600-146-06 600-137-09 600-146-07 600-147-9 600-154-09 10 600-146-06 600-146-07 600-137-10 600-146-08 600-147-10 600-154-09 11 600-146-08 600-154-11 12 600-146-08 600-137-12 600-146-10 600-147-12 600-154-12 13 600-146-10 600-154-13 14 600-146-10 600-137-14 600-146-12 600-147-14 15 600-146-11 600-137-15 600-146-13 600-147-15 600-154-15 16 600-146-13 Sample Part Number 17 600-146-14 18 600-154-18 600-146 -01 19 600-154-19 Product 21 600-146-17 Series and Dash 23 600-154-23 Basic Part Number See Table I for torque values Number To order as a kit replace dash number withKI i.e.: sustitute 600-146-01 with 600-146-KIT. Kit consists of all connector family shell size tools Spanner tool for tightening Series 80 extended length jam nut connectors with size 8 contacts These Lengthened spanner tools are used to tighten jam nuts on extended-length connectors with size 8 contacts. 3/8 square drive. Nickel-plated heat-treated steel. Size 8 Spanner Tool Part Number Series 801 Series Series 805 Series Jam Nut Thread Size Part No. Shell Size Shell Size Ref 600-197-05 8 N/A .562 600-197-07 N/A 10 .688 600-197-13 16 N/A 1.062 600-197-14 17 N/A 1.125 600-197-15 N/A 18 1.188 600-197-16 19 19 1.250 600-197-17 21 21 1.375 600-197-18 N/A 23 1.500 Sample Part Number 600-197 -05 Product See Table I for torque values Series and Dash To order as a kit replace dash number withKI i.e.: substitute 600-197-05 with 600-197-KIT Basic Part Number Kit consists of all connector family shell size tools Number Dimensions in Inches (millimeters) are subject to change without notice. 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com A-16 E-Mail: sales glenair.comSeries 80 Mighty Mouse Contacts and Tools Jam Nut Tightening Tools, Connector Holding Fixtures and Mighty Mouse Recommended Torque Values, Connector holding tool for tightening backshells and accessories Plug tool for holding Series 80 plug connectors. Receptacle tool for holding Series 80 receptacle A 1 Heat-treated steel, nickel plated. 2 connectors. Heat-treated steel, nickel plated. Holding Tool Part Number (Add P or R) Shell Size Series 800 Series 801 Series 803 Series 804 Series 805 5 600M005-05 600MM005-05 600-140-5 600-141-5 6 600M005-06 600MM005-06 600-140-6 600-141-6 7 600M005-07 600MM005-07 600-140-7 600-141-7 8 600M005-08 600MM005-08 600-140-8 600-141-8 600-185-8 9 600M005-09 600MM005-09 600-140-9 600-141-9 600-185-9 10 600M005-10 600MM005-10 600-140-10 600-141-10 600-185-10 1 11 600MM005-11 600-185-11 12 600M005-12 600-140-12 600-141-12 600-185-12 13 600MM005-13 600-185-13 14 600-140-14 600-141-14 15 600-140-15 600-141-15 600-185-15 16 600MM005-16 17 600MM005-17 18 600-185-18 19 600-185-19 21 600MM005-21 600-154-21 23 600-185-23 Add P for plug holder or R for receptacle holder, followed by polarizing position (N, X,Y, Z). Add P for plug holder or R for receptacle holder, followed by polarizing position (A, B, C, D). Add P for plug holder or R for receptacle holder, followed by polarizing position (A, B, C, D, E, F). Omit for single master key). Add P for plug holder or R for receptacle holder, followed by polarizing position (A, B, C, D, E, F). Omit 2 polarization for receptacle tools. The following tabulations show the changes to the Glenair recommended torque values for connector coupling torque and backshell tightening torque. The jam nut tightening torque values will remain the same. Series 800 Recommended Torque Values Series 801, 802, 803, 804, 805 Recommended Torque Values Backshell Tightening Backshell Tightening Shell Size Series 801, In-Lbs. Shell Size Series 805 Series 800 802, 803 In-Lbs. Min. Max. Min. Max. 5 - 12 16 5 12 16 6 8 14 18 6 14 18 7 9 16 20 7 16 20 8 10 18 22 8 16 20 9 11 20 24 9 16 20 10 12 22 26 10 16 20 12, 13 15 28 32 12 16 20 14, 16 18 28 32 15, 17 19 28 32 19, 21 23 28 32 Dimensions in Inches (millimeters) are subject to change without notice. 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com A-17 E-Mail: sales glenair.com Revised 10/09/2017 MightMighty Mouse y Mouse with 8 CContacts and Tontacoolsts