601-500 Glenair

The Advanced Termination System for Interconnect Cable Shielding High-volume pneumatic tool Easy-to-use manual tools 3 lengths and 3 widths of for bench use with built-in calibration counter EMI braid termination bands SEPTEMBER 2020Manual Tools and Bands Standard Banding Tool The 601-100 Band-Master ATS Standard Tool with Counter for Standard Bands Weighs approximately 1.30 lbs., and is designed for .240 width clamping bands in a tension range from 100 to 180 lbs. Calibrate at 150 lbs. 5 lbs. for most shield terminations. Tool and band should never be lubricated. The 600-058 QPL Qualified (M81306/1A) Standard Banding Tool without Counter Weighs 1.22 and is designed for .240 width clamping bands in a tension range from 100 to 180 lbs. Calibrate at 150 lbs. 5 lbs. for most shield terminations. Tool and band should never be lubricated (not shown). Band-Master ATS Standard Band Selection Color-coded tool handle: Length Part Number Fits Diameter Bands In. mm. Flat Pre-Coiled In. mm. = Standard Black Short Standard 9.0 228.6 601-005 601-006 1.0 25.4 Medium Standard 14.25 361.95 601-040 601-041 1.8 45.7 Long Standard 18.0 457.2 601-049 601-050 2.5 63.5 Cable Pull Strength for Band-Master ATS Standard Bands Band Width Band Thickness Calibration Name Material Type Cable Pull Strength Setting In mm In mm Standard 300 SS 0.240 6.10 .020 .51 150 5 lbs per AS85049/128 QPL Qualifiied Standard Band Selection Length Mil Spec Part Number Fits Diameter Bands in. mm. Flat Pre-Coiled in. mm. Standard Band 14.25 361.95 M85049/128-3 M85049/128-4 1.8 45.7 Cable Pull Strength for Standard QPL Qualified Bands Band Width Band Thickness Calibration Name Material Type Cable Pull Strength Setting In mm In mm Standard 300 SS 0.240 6.10 .020 .51 150 5 lbs per AS85049/128 Knife and Blade and Replacement / Upgrade Kit Tool Replacement Part Number(s) 601-100 Band-Master Standard 601-330 Knife and Blade Kit 600-058 QPL Qualified Tool Contact Factory 2 2020 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com U.S. CAGE code 06324 Dimensions in Inch (mm)