620AS046M24 Glenair

620-046 Strain Relief Rotatable Coupling - Straight and 90 620 A S 046 M 16 D CONNECTOR Product Series Drain Hole Option - 90 only DESIGNATOR (Omit for None) Connector Designator A Shell Size (Table III) Angle and Profile ROTATABLE S = Straight Finish (Table II) COUPLING A = 90 Basic Part No. Cable A Thread E Entry (Table I) (Table III) See inside back cover fold-out or F (Table III) C (Table I) pages 13 and 14 for Tables I and II. 1. Cable Entry is defined as the accommodation G A Thread entry for the wire (Table III) (Table I) Drain Holes, bundle or cable. 4 Places, Dimensions are not 90 Apart intended for inspection C (Table I) criteria. 2. Metric dimensions (mm) are indicated in H H (Table III) parentheses. (Table III) Cable F Entry (Table III) TABLE III: CABLE ENTRY Shell E F G H Cable Entry Max Max Max Max Closed Open Size 08 .630 (16.0) .782 (19.9) .780 (19.8) .808 (20.5) .125 (3.2) .204 (5.2) 10 .740 (18.8) .862 (21.9) .861 (21.9) .867 (22.0) .187 (4.7) .286 (7.3) .860 (21.8) .291 (7.4) 12 1.003 (25.5) 1.050 (26.7) .929 (23.6) .416 (10.6) 14 .860 (21.8) 1.061 (26.9) 1.110 (29.0) .992 (25.2) .351 (8.9) .476 (12.1) .990 (25.1) 1.334 (33.9) 1.260 (32.0) 1.056 (26.8) .501 (12.7) .626 (15.9) 16 18 1.240 (31.5) 1.466 (37.2) 1.370 (34.8) 1.233 (31.3) .518 (13.2) .706 (17.9) 20 1.360 (34.5) 1.572 (39.9) 1.500 (38.1) 1.296 (32.9) .581 (14.8) .831 (21.1) 1.490 (38.0) .644 (16.4) 22 1.688 (42.9) 1.620 (41.1) 1.358 (34.5) .956 (24.3) 24 1.610 (40.9) 1.790 (45.5) 1.750 (44.5) 1.420 (36.1) .706 (17.9) 1.081 (27.5) 1.760 (44.7) 2.035 (51.7) 1.890 (58.0) 1.634 (41.5) .750 (19.1) 1.187 (30.1) 28 32 1.950 (49.5) 2.386 (60.6) 1.950 (49.5) 1.859 (47.2) .875 (22.2) 1.250 (31.8) 36 2.330 (59.2) 2.496 (63.4) 2.070 (52.6) 1.984 (50.4) .938 (23.8) 1.375 (34.9) 2.510 (63.8) .938 (23.8) 40 2.566 (65.2) 2.200 (55.9) 2.109 (53.6) 1.500 (38.1) 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 62 - Page 5 62How to Order Reference Information Standard Materials and Finishes TABLE II - STANDARD FINISHES GLENAIR M85049 SYMBOL SYMBOL REFERENCE ONLY FINISH SPECIFICATION(S) A Cadmium Plate, Bright AMS-QQ-P-416, Type I, Class 2 B Cadmium Plate, Olive Drab AMS-QQ-P-416, Type II, Class 3 C* Anodize, Black AMS-A-8625, Type II, Class 2 A G* Hard Coat, Anodic AMS-A-8625, Type III, Class 1 J Iridite, Gold Over Cadmium Plate Over MIL-C-5541, Class 3 AMS-QQ-P-416, Type II, Electroless Nickel Class 3 over AMS-C-26074, Class 4, Grade B LF Cadmium Plate, Bright Over 1000 Hour Corrosion Resistance Electroless Nickel Electroless Nickel AMS-C-26074, Class 4, Grade B M N N Cadmium Plate, Olive Drab Over AMS-QQ-P-416, Type II, Class 3 over Electroless Nickel Electroless Nickel AMS-C-26074 NC Zinc Cobalt, Dark Olive Drab 96 Hour Corrosion Resistance NF Cadmium Plate, Olive Drab Over 1000 Hour Corrosion Resistance W Electroless Nickel T Cadmium Plate, Bright Over AMS-QQ-P-416, Type I, Class 3 Electroless Nickel ASTMB 733-90, SC2, Type I, Class 5, MIL-C-26074*** Cadmium Plate, Black AMS-QQ-P-416, Type II, Class 3 U ZU** Cadmium Plate, Black AMS-QQ-P-416, Type II, Class 3 Zinc-Nickel Alloy, Olive Drab ASTMB 841-91, Over Electroless Nickel 1000 Hour Salt ZN Spray * Anodize finish not suitable for EMI Shielding or grounding applications. ** Applicable to corrosion resisting steel backshells and accessories. Consult factory for other available finishes. The following standard materials are used for the majority of Glenair the elements used in Glenair s general accessory products. Contact backshells and connector accessories. However, backshell compo- Glenair for applicable specifications on items not listed below. nents are not limited to those items listed, but are representative of STANDARD MATERIALS - BACKSHELLS AND ACCESSORIES COMPONENT MATERIAL SPECIFICATION Aluminum AMS-QQ-A-200 Machined components: such as backshell bodies, fabricated elbows, protective covers, ASTMB221, 209 rotatable couplers, dummy stowage receptacles, lock nuts, G-spring support rings, EMI ground rings, grommet followers, etc. Die cast components: such as angular backshells, strain relief backshells, strain relief Aluminum QQ-A-591 bodies, strain relief saddles, special EMI ground rings, etc. ASTMB85, 26 Backshells or strain reliefs: available in optional corrosion resisting steel and Corrosion Resisting Steel ASTMA582 (300 Series) hardware: such as screws, washers, rivets, wire rope, sash chain, band straps, etc. AMS-QQ-S-763 Elastomeric seals: such as O-rings, cable jacket seals, grommets, etc. Silicone ZZ-R-765, MIL-R-25988 Teflon TFE Anti-friction and thrust washers Corrosion Resistant N/A Anti-rotation device Material NOTES BODY STRAP On all length callouts, tolerance is .060 unless otherwise Glenair offers an optional stainless steel body strap for specified. attaching protective covers as illustrated. To specify body strap, add suffix letter C to the end of the part number. For Unless otherwise specified, the following other dimensional example 360AS001M1610M6C. tolerances will apply: .xx = .03 (0.8) .xxx = .015 (0.4) Lengths = .060 (1.52) Angles = 5 Metric dimensions (mm) are indicated in parentheses NOTE: For your convenience these tables have 2-56 Screw and Nut been reproduced inside the back cover fold-out. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com 14