630B022NF04 Glenair

63 630-005 EMI/RFI Environmental G-Spring Bulkhead Fitting with Strain Relief Front and Rear Panel Mount - Straight 630 A 005 NF 16 2 G-Spring Product Series Strain Relief Style (G, F) EMI/RFI Fitting Type Fitting Style Shield A = Rear Mount 1 = RFI/EMI Only Termination B = Front Mount 2 = RFI/EMI Environmental Basic Part No. Cable Entry (Table III) Finish (Table II) .820 .960 (20.8) (24.4) .400 C Mounting Max .690 (17.5) Max (10.2) Panel Hole (Typ) Max .125 (3.2) Ref Max Panel D F * E B Sq. Typ * F Panel Cutout For Rear Mount Style 1 Style 1 G RFI/EMI RFI/EMI Panel Cutout For Rear Mount Type A Front Mount Type B Front Mount (Shown With Style F (Shown With Style G Strain Relief) Gland Nut) .820 .960 (20.8) 1.220 B (24.4) 1.220 Max (31.0) Sq. Max (31.0) Panel .125 (3.2) Max Ref Max Panel Cable A Range Sq. Style 2 Style 2 469-001-XX Shield Support Ring RFI/EMI Environmental RFI/EMI Environmental (order separately) is recommend- Rear Mount Type A Front Mount Type B ed for use in all G-Spring Bulkhead (Shown With Style F (Shown With Style F Fittings (see page 460-3) Strain Relief) Strain Relief) 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 63 - Page 4630-005 EMI/RFI Environmental G-Spring Bulkhead Fitting with Strain Relief Front and Rear Panel Mount - Straight See inside back cover fold-out or page 14 for Table II. TABLE III: CABLE ENTRY C Cable Range Dash A B +.015 (+0.4) No. Min Max Max Dim - 0 (-0.0) 01 .156 (4.0) .250 (6.4) .885 (22.5) .593 (15.1) .120 (3.0) 02 .188 (4.8) .375 (9.5) 1.104 (28.0) .812 (20.6) .120 (3.0) 03 .250 (6.4) .438 (11.1) 1.197 (30.4) .906 (23.0) .120 (3.0) 04 .280 (7.1) .500 (12.7) 1.291 (32.8) .968 (24.6) .120 (3.0) 05 .375 (9.5) .625 (15.9) 1.385 (35.2) 1.062 (27.0) .120 (3.0) 06 .500 (12.7) .750 (19.1) 1.635 (41.5) 1.250 (31.8) .120 (3.0) 07 .625 (15.9) .875 (22.2) 1.760 (44.7) 1.375 (34.9) .147 (3.7) 08 .750 (19.1) 1.000 (25.4) 2.010 (51.1) 1.562 (39.7) .147 (3.7) 09 .875 (22.2) 1.125 (28.6) 2.260 (57.4) 1.750 (44.5) .173 (4.4) 10 1.000 (25.4) 1.250 (31.8) 2.510 (63.8) 1.938 (49.2) .173 (4.4) 11 1.125 (28.6) 1.375 (34.9) 2.760 (70.1) 2.125 (54.0) .173 (4.4) TABLE III (Continued) F G Dash D E +.015 (+0.4) +.031 (+0.8) No. Max Max - 0 (-0.0) - 0 (-0.0) 01 .843 (21.4) .625 (15.9) .515 (13.1) .250 (6.4) 02 .968 (24.6) .750 (19.1) .640 (16.3) .375 (9.5) 03 1.046 (26.6) .875 (22.2) .765 (19.4) .438 (11.1) 04 1.156 (29.4) 1.000 (25.4) .890 (22.6) .500 (12.7) 05 1.218 (30.9) 1.125 (28.6) 1.015 (25.8) .625 (15.9) 06 1.343 (34.1) 1.250 (31.8) 1.140 (29.0) .750 (19.1) 07 1.468 (37.3) 1.375 (34.9) 1.265 (32.1) .875 (22.2) 08 1.593 (40.5) 1.500 (38.1) 1.390 (35.3) 1.000 (25.4) 09 1.718 (43.6) 1.625 (41.3) 1.515 (38.5) 1.125 (28.6) 10 1.843 (46.8) 1.750 (44.5) 1.640 (41.7) 1.250 (31.8) 11 2.187 (55.5) 1.875 (47.6) 1.765 (44.8) 1.375 (34.9) 1. Metric dimensions (mm) are indicated in parentheses. 2. Cable range is dened as the accommodations range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 3. For proper termination, it is recommended that Glenair 469-001 Shield Support Ring (page 460-3) must be used on all assemblies. Place ring over wire and under shield position under G-Spring. 2005 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com Series 63 - Page 5 63