713AL100NF24140 Glenair

Adapters and Transitions 713-100 Metal Straight, 45, and 90 Connector Adapters for use with Transition Fittings Circular connector adapter, non-self-locking with environmental O-Ring for use with transition fi ttings Length How To Order S Only - In 1/2 Inch (12.7 mm) Angular Function Increments S = Straight (e.g. 4 = 2 Inches) Finish Product K = 45 See pg. A-32 for 1 = Style 1 Series L = 90 (Table II) minimum lengths 713 A S 100 M 16 1 32 - 4 Connector Adapter Material Shell Size Dash No. Designator 100 = Aluminum (Table III) (Table IV) (Table I, 101 = Brass Intro) 110 = Stainless Steel O-Ring Length F 45 A Thread (Table I, Intro) G C or D J (Table I, Intro) E Typ SYM K 45 H Thread D SYM S Straight E SYM L 90 Material and Finish Adapters, Coupling Nuts and Elbows - Table II (See P/N development) O-Ring - Silicone/N.A. Notes Interface O-Ring not applicable to connector designator A. 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: E-30 sales glenair.com713-100 Metal Straight, 45, and 90 Connector Adapters for use with Transition Fittings Table III: Shell Size/Dimensions Shell Size Max D E F G Dash No. A, D, E, Max Max Max Max H Ref** F, J,K, L,S 08 09 08 .531 (13.5) .781 (19.8) .437 (11.1) .625 (15.9) 10 11 12 .625 (15.9) .906 (23.0) .500 (12.7) .656 (16.7) 12 13 16 .688 (17.5) .906 (23.0) .500 (12.7) .719 (18.3) 14 15 20 .719 (18.3) 1.000 (25.4) .562 (14.3) .781 (19.8) 16 17 24 .906 (23.0) 1.062 (27.0) .656 (16.7) .844 (21.4) 18 19 24 .968 (24.6) 1.062 (27.0) .656 (16.7) .844 (21.4) 20 21 32 1.031 (26.2) 1.093 (27.8) .719 (18.3) .844 (21.4) 22 23 32 1.156 (29.4) 1.156 (29.4) .812 (20.6) .906 (23.0) 28 25 40 1.219 (31.0) 1.281 (32.5) .812 (20.6) .906 (23.0) 24 - 40 1.281 (32.5) 1.531 (38.9) 1.093 (27.8) .906 (23.0) 32 - 48 1.593 (40.5) 1.719 (43.7) 1.093 (27.8) 1.219 (31.0) 36 - 64 1.718 (43.6) 1.906 (48.4) 1.156 (29.4) 1.281 (32.5) ** Dimensions D-E-F-G apply to connector Shell Size and Conduit Dash No. combinations listed. When larger Conduit Dash Numbers are selected, consult factory for dimensions. Table IV: Conduit Size Conduit Size H Thread J (Ref) Dash No. Class 2A .015 (.4) 72 74 75 06 06 06 - 7/16 - 28 UNEF .193 (4.9) 08 - - 08 1/2 - 20 UNF .255 (6.5) Table II: Finish E 09 09 09 09 9/16 - 24 UNEF .286 (7.3) Sym Finish 10 - 10 - 9/16 - 24 UNEF .317 (8.1) B Olive Drab over Cadmium Plate 12 12 12 12 5/8 - 24 UNEF .380 (9.7) J Gold Iridite over Cadmium Plate over Nickel 14 14 14 - 11/16 - 24 UNEF .442 (11.2) M Electroless Nickel 16 16 16 16 3/4 - 20 UNEF .505 (12.8) N Olive Drab over Cadmium Plate over Nickel 20 20 20 20 7/8 - 20 UNEF .630 (16.0) NC Zinc Cobalt, Olive Drab 24 24 24 24 1 - 20 UNEF .755 (19.2) Olive Drab over Cadmium Plate over Electroless Nickel NF 28 28 28 - 1 3/16 - 18 UNEF .880 (22.4) (1000 Hour salt Spray) 32 32 32 32 1 5/16 - 18 UNEF 1.005 (25.5) T Bright Dip Cadmium over Nickel 40 40 40 40 1 1/2 - 18 UNEF 1.255 (31.9) Z1 Passivate 48 48 48 48 1 3/4 - 18 UNS 1.505 (38.2) 56 - 56 56 2 - 18 UNS 1.755 (44.6) 64 - 64 64 2 1/4 - 16 UN 2.005 (50.9) 80 - - 80 2 3/4 - 16 UN 2.505 (63.6) *** Consult factory for adapters using 3.000 inch (76.2) conduit 2012 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: E-31 sales glenair.com Adapters and Transitions