770-001S1 and 770-003S1 Type 1 High-Performance Elastomer Straight Lipped Adapter Shrink Boots, Standard Type 1 High-Performance Elastomer Boots for Advanced Temperature and Chemical Tolerance Semi-rigid high performance boots combine excellent resistance to fuels, oils and solvents with superior performance at extreme temperatures. Rated for 3000 hours continuous operation at +150 C, these boots fit most standard boot adapters for circular connectors. Material meets the requirements of VG95343 Type 6, BSG 198-5-DE, EN62329-102 and SAE AS5258 Type H. These boots are recommended for demanding applications such as military vehicles and petrochemical exploration. Boots come standard in black, see table below for optional colors. B -75 C to +150 C Excellent resistance to fuels, oils, solvents and heat. Ten available colors Part Number with Eyelet Part Number without Eyelet Pre-Coated with Pre-Coated with Pre-Coated Pre-Coated with Pre-Coated with Pre-Coated Boot No Adhesive W1 Hi-Temp Hot- W2 Standard Hot- with R Epoxy No Adhesive W1 Hi-Temp Hot- W2 Standard Hot- with R Epoxy Size Lining Melt Adhesive Melt Adhesive Adhesive Lining Melt Adhesive Melt Adhesive Adhesive 00 770-003S100 770-003S100W1 770-003S100W2 770-003S100R 01 770-003S101 770-003S101W1 770-003S101W2 770-003S101R 02 770-003S102 770-003S102W1 770-003S102W2 770-003S102R 03 770-001S103 770-001S103W1 770-001S103W2 770-001S103R 770-003S103 770-003S103W1 770-003S103W2 770-003S103R 04 770-001S104 770-001S104W1 770-001S104W2 770-001S104R 770-003S104 770-003S104W1 770-003S104W2 770-003S104R 05 770-001S105 770-001S105W1 770-001S105W2 770-001S105R 770-003S105 770-003S105W1 770-003S105W2 770-003S105R 06 770-001S106 770-001S106W1 770-001S106W2 770-001S106R 770-003S106 770-003S106W1 770-003S106W2 770-003S106R 07 770-001S107 770-001S107W1 770-001S107W2 770-001S107R 770-003S107 770-003S107W1 770-003S107W2 770-003S107R 08 770-001S108 770-001S108W1 770-001S108W2 770-001S108R 770-003S108 770-003S108W1 770-003S108W2 770-003S108R 09 770-001S109 770-001S109W1 770-001S109W2 770-001S109R 770-003S109 770-003S109W1 770-003S109W2 770-003S109R Add-D to the end of any part number for drain holes. Add-P to the end of any part number for potting ports. Material Color Options for Type 1 High Performance Elastomer Only Add Optional Color Mod Code to End of Any Type 1 Material Product Color Similar to (Reference) Color Similar to (Reference) Mod Code Mod Code 632 B Blue PANTONE 3005U 632 R Red PANTONE 1797U 632 E Grey FED-STD-595 36270 632 T Tan FED-STD-595 33446 632 G Green PANTONE 355U 632 W White FED-STD-595 37875 632 P Purple FED-STD-595 37100 632 Y Yellow PANTONE YELLOW U 632 O Orange FED-STD-595 32300 Standard Black FED-STD-595 37038 Dimensions in inches (millimeters) and are subject to change without notice. 2012 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com B-3 Lipped StraightX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Heat Shrink Tubing and Sleeves category: Click to view products by Glenair manufacturer: Other Similar products are found below : 770-006S102 5685710001 CR8248-000 CR9960-000 603312-4 607381P039 611112-000 617867N001 6500750004 CZ1420-000 D-306-38 770-003S106W2 770-005S105W1 770-005S106W1 770-007A303 770-010Y106W1 770-010Y706W1 7771210001 MFP-1/4 -Clear MFP- 3/64 -Clear 790-3012 MFT-MT2000-NO.14-0-SP MHHT-4-15K2-G-104 MIL-LT-1-1/2-4-SP MIL-LT-1-1/2-9-STK MIL-LT-1/2-2-STK MIL-LT-3-0-SP MIL-LT-3/32-0-SP MIL-LT-3/32-6-SP MIL-LT-3/4-6-SP MIL-LT-3/8-0-SP 8159270001 839602-000 8423-6 FP301-116- 6 -Black FP301-1/2-48 -Black FP301-12-48 -Black-Hdr FP301-1/4-48 -Black FP301-1/4-48 -White-Hdr FP301-1-6 -Clear FP301-18-48 - Black-Hdr FP301-1/8-6 -Black FP301-18-6 -Black-Bulk FP301-316-48 -Blue-Hdr FP301-316-6 -Clear FP301-332-6 -Black 912229N002 120-126-16BL 121-001-09 121-018-32