770-006S1 Type 1 High-Performance Elastomer Straight Lipped Adapter Shrink Boots, Long Tail Type 1 High-Performance Elastomer Boots for Advanced Temperature and Chemical Tolerance Semi-rigid high performance boots combine excellent resistance to fuels, oils and solvents with superior performance at extreme temperatures. Rated for 3000 hours continuous operation at +150 C, these boots tfi most standard boot adapters for circular connectors. Long tail provides additional cable strain relief compared to standard length boots. Material meets the requirements of VG95343 Type 6, BSG 198-5-DE, EN62329-102 and SAE AS5258 Type H. These boots are recommended for demanding applications such as military vehicles and petrochemical exploration. Boots come B standard in black, see table below for optional colors. -75 C to +150 C Excellent resistance to fuels, oils, solvents and heat. Part Number Ten available colors Boot Pre-Coated with W1 Hi- Pre-Coated with W2 Pre-Coated with R Size No Adhesive Lining Temp Hot-Melt Adhesive Standard Hot-Melt Adhesive Epoxy Adhesive 02 770-006S102 770-006S102W1 770-006S102W2 770-006S102R 03 770-006S103 770-006S103W1 770-006S103W2 770-006S103R 04 770-006S104 770-006S104W1 770-006S104W2 770-006S104R 05 770-006S105 770-006S105W1 770-006S105W2 770-006S105R 06 770-006S106 770-006S106W1 770-006S106W2 770-006S106R 07 770-006S107 770-006S107W1 770-006S107W2 770-006S107R 08 770-006S108 770-006S108W1 770-006S108W2 770-006S108R 09 770-006S109 770-006S109W1 770-006S109W2 770-006S109R 10 770-006S110 770-006S110W1 770-006S110W2 770-006S110R 11 770-006S111 770-006S111W1 770-006S111W2 770-006S111R Add-D to the end of any part number for drain holes. Add-P to the end of any part number for potting ports. Material Color Options for Type 1 High Performance Elastomer Only Add Optional Color Mod Code to End of Any Type 1 Material Product Mod Code Color Similar to (Reference) Mod Code Color Similar to (Reference) 632 B Blue PANTONE 3005U 632 R Red PANTONE 1797U 632 E Grey FED-STD-595 36270 632 T Tan FED-STD-595 33446 632 G Green PANTONE 355U 632 W White FED-STD-595 37875 632 P Purple FED-STD-595 37100 632 Y Yellow PANTONE YELLOW U 632 O Orange FED-STD-595 32300 Standard Black FED-STD-595 37038 Dimensions in inches (millimeters) and are subject to change without notice. 2012 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com B-13 Lipped StraightX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Heat Shrink Tubing and Sleeves category: Click to view products by Glenair manufacturer: Other Similar products are found below : 770-006S102 5685710001 CR8248-000 CR9960-000 603312-4 607381P039 611112-000 617867N001 6500750004 CZ1420-000 D-306-38 770-003S106W2 770-005S105W1 770-005S106W1 770-007A303 770-010Y106W1 770-010Y706W1 7771210001 MFP-1/4 -Clear MFP- 3/64 -Clear 790-3012 MFT-MT2000-NO.14-0-SP MHHT-4-15K2-G-104 MIL-LT-1-1/2-4-SP MIL-LT-1-1/2-9-STK MIL-LT-1/2-2-STK MIL-LT-3-0-SP MIL-LT-3/32-0-SP MIL-LT-3/32-6-SP MIL-LT-3/4-6-SP MIL-LT-3/8-0-SP 8159270001 839602-000 8423-6 FP301-116- 6 -Black FP301-1/2-48 -Black FP301-12-48 -Black-Hdr FP301-1/4-48 -Black FP301-1/4-48 -White-Hdr FP301-1-6 -Clear FP301-18-48 - Black-Hdr FP301-1/8-6 -Black FP301-18-6 -Black-Bulk FP301-316-48 -Blue-Hdr FP301-316-6 -Clear FP301-332-6 -Black 912229N002 120-126-16BL 121-001-09 121-018-32