770-018S202W1 Glenair

SERIES 77 Lipped, Straight Shrink Boots 770-018S Commercial Heavy Wall Boot How to Order Lipped, heavy wall straight heat shrink boots provide mechanical and environmental protection from damage and debris . These heavy wall shrink boots are the commercial equivalent to our 770-008S NAVSEA qualified boots and are available in all eight materials and all five adhesive choices . Glenair straight boots fit most standard boot adapters for circular connectors A . ll adhesive lined and unlined shrink books are RoHS compliant Shr . ink boots are water-tight when equipped with factory installed or user-installed adhesive . Lipped boots lock into boot groove located on adapter . Choose boot size based on adapter diameter and cable diameter . How to Order C Sample Part Number 770 -018 S 1 03 W1 Product Series 770 = Series 77 shrink boot Basic Number 018 = heavy wall lipped boot Angular Function S = straight Material See material and adhesives table Boot Size 00, 01 , 02, 03, 04, 05 see dimensions table Adhesive Lined Omit for no adhesive see material and adhesives table Material and Adhesive Compatibility Hot Melt Adhesives High Performance Epoxy Adhesives Material Description W1 W2 W3 (TACOM approved) R U (Compound No.) High Temperature Standard Elastomeric Pre-Coat Two-Part -55C to 125C -55C to 70C -55C to 125C -75C to 150C -75C to 155C 1 High-Performance Semi-Rigid Elastomer (2025) Type U epoxy 2 Zero Halogen Semi-Rigid Polyolefin (2010) adhesive is 3 General Purpose Flexible Polyolefin (2040) compatible with all boot materials . 5 Viton Fluoroelastomer Blend (2050) Ordered separately, 6 High Performance Elastomer Alloy (2051) user-installed 7 Semi-Rigid Polyolefin (2071) (779-001) Or . der boot with no 8 Low Outgassing Fluoropolymer Alloy (2008) Material Type 8 not available with pre-coat adhesive U . se Type U two-part epoxy adhesive lining . 9 Low Temp Flexible Polyolefin (2013) NOTES 1 . See Modification Codes listed in Section A for material color options available for Type 1 (compound 2025) material . C-20 2017 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com Series 77 Full Nelson Shrink Boot Catalog U.S. CAGE code 06324 Dimensions in Inches (millimeters) are subject to change without notice. Straight Boots Material CodeStraight Boots SERIES 77 Lipped, Straight Shrink Boots 770-018S Commercial Heavy Wall Boot Dimensions Lipped Straight Adapter Shrink Boots, Standard: Dimensions R C Ce Ae Cr J H Ar L P0 AS SUPPLIED RECOVERED Dimensions C Boot Glenair Part AS858049/140 Ae Dia. Min Ar Dia Max Ce Dia. Min Cr Dia. Max R PO 10% Size Marking Fig 4 Reg Expanded Recovered Expanded Recovered 10% 00 S00 23 827 (21 . 0) 551 (140) . 630 (16 . 0) . 209 (5 . 3) . 5315 (135 . 0) . 1 .10 (279) . 01 S01 24 .984 (25 .0) .650 (16 .5) .984 (25 .0) .331 (8 .4) 6 .024 (153 .0) 1 .20 (30 .5) 02 S02 25 1299 (33 0) .799 (20 .3) 1 .299 (33 .0) .429 (10 .9) 6 .024 (153 .0) 1 .20 (30 .5) 03 S03 26 1 .693 (43 .0) .902 (22 .9) 1 .693 (43 .0) .559 (14 .2) 6 .890 (175 .0) 1 .50 (38 .1) 04 S04 27 2 .087 (53 .0) 1 .098 (27 .9) 2087 (53 0) .701 (17 .8) 6 .890 (175 .0) 150 (38 1) 05 S05 28 2 .835 (720) . 1449 (36 . 8) . 2835 (72 . 0) 949 (241) . 7244 (184 0) 1 .60 (40 .6) For materials Type 2, Type 3 and Type 9, dimension Ce is nominal Lipped Straight Shrink Boots: Part Marking, Raised Lettering EXPANDED RECOVERED BOOT SIZE CODE LETTER S INDICATES STRAIGHT BOOT LETTER A INDICATES ADAPTER (CONNECTOR) END LETTER C INDICATES CABLE END 2017 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com Series 77 Full Nelson Shrink Boot Catalog C-21 U.S. CAGE code 06324 Dimensions in Inches (millimeters) are subject to change without notice.