790-024P Crimp Terminated Cable Receptacle Connector, Pin Contacts How To Order 790-024P Cable Receptacles PIN CONTACTS WITH CRIMP TERMINATION Rugged, lightweight 790-024P connectors feature machined aluminum shells, uorosilicone face seals and wire grommets for environmental protection. Contacts are rear-release snap-in crimp type. Connectors are supplied with crimp contacts packaged separately. Size 23 signal pins accept up to 22 AWG wire. Size 16 contacts accept 16-18 AWG wire. Size 12 contacts accept 12-14 AWG wire. Size 12 and 16 cavities also accept coaxial contacts purchased separately. Connector shell features a groove for attachment of a low-pro le EMI backshell adapter 799-015, ordered separately. HOW TO ORDER Sample Part Number 790-024P C-13 M P Shell Size - Base Part Insert D Number Arrangements Shell Finish Hardware Option See Table 1 for 790-024P M Available Insert Cable Receptacle Electroless Nickel Arrangements. general purpose with Pin Contacts applications To order a connector N without size 16 or 12 MT Thru-Hole P power pins, substitute Nickel-PTFE No Hardware Female Jackpost W instead of P in the 1000 Hour Grey maximum corrosion insert arrangement. protection and durability Example: (non-re ective grey) L K 36P2 is supplied with 2 ZNU Low-Pro le Captivated Slot-Head Extended power pins. Zinc-Nickel with Black Jackscrew, Hex Head Jackscrew Chromate 36W2 is supplied less tactical applications the power pins. (non-re ective black) Additional shell See Section B for nishes are listed on coaxial contacts S T page C-9. purchased separately. Low-Pro le Captivated Slot-Head Extended Screwlock, Hex Head Captivated Screwlock SPECIFICATIONS MATERIALS AND FINISHES Current Rating 23 5 AMPS, 16 13 A., 12 23 A. Shell Aluminum alloy Dielectric Withstanding 23 500 VAC RMS, 12 and 16 1800 Copper alloy, 50 microinches gold Contacts Voltage VAC RMS plated Insulation Resistance 5000 megohms minimum Insulators Liquid crystal polymer (LCP) Operating Temperature -65 C. to +150 C. Retention Clips Beryllium copper alloy Shock 300 g. Interfacial Seal, Grommet Flourosilicone rubber Vibration 37 g. Hardware 300 series stainless steel Dimensions in Inches (millimeters) are subject to change without notice. 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com E-Mail: sales glenair.com D-1 Series 79 Cable ConnectorsSeries 79 Cable Connectors 790-024P Crimp Terminated Cable Receptacle Connector, Pin Contacts How To Order Table I Contact Arrangements CROSS-SECTIONAL VIEW OF 790-024P Contact Quantity REAR INSULATOR RETAINING CLIP Layout 23 16 12 Face View GROMMET INTERFACIAL SEAL POTTING A-5 5 2 WIRE (REF.) B-2P2 PIN CONTACT 9 B-9 FRONT INSULATOR 13 C-13 15 D-15 GROOVE FOR SHELL EMI ADAPTER 3 D-3P3 52 D-7P2 TABLE 2 HARDWARE OPTION 92 E-11P2 .190 (4.83) MAX 19 E-19 43 E-7P3 F-15P2 13 2 N P F-23 23 D No Mating Hardware Jackposts F-5P5 5 Connector is supplied with thru-holes. Shell Connector is supplied with removable sizes H and L are .148 (3.76) diameter, other jackposts. Shell sizes H and L have 4-40 G-33 33 shell sizes are .092 (2.34) diameter. Accepts UNC thread, other sizes have 2-56 thread. standard Micro-D M83513 hardware. Stainless steel. Conforms to M83513/05. H-10P464 .155 22 7 H-29P7 (3.94) .925 MAX (23.50) H-36P2 34 2 MAX H-54P2 52 2 H-5P5 5 L K 66 H-66 Extended Jackscrews Hex Head Jackscrews Connector is supplied with stainless steel slot Connector is supplied with stainless steel J-17P4 13 4 head non-removable jackscrews. Shell sizes non-removable low profile jackscrews. Shell H and L have 4-40 UNC thread, other sizes sizes H and L have 4-40 UNC thread, other J-25P2 23 2 have 2-56 thread. sizes have 2-56 thread. 33 J-33 .925 7 J-7P7 (23.50) .290 (7.37) MAX MAX K-27P4 23 4 K-35P2 33 2 43 K-43 S T 9 Hex Head Screwlocks Extended Screwlocks K-9P9 Connector is supplied with stainless steel Connector is supplied with stainless steel L-6P6 6 non-removable low profile screwlocks. Shell non-removable slot head screwlocks. Shell sizes H and L have 4-40 UNC thread, other sizes H and L have 4-40 UNC thread, other sizes have 2-56 thread. Screwlocks allow sizes have 2-56 thread. Screwlocks allow L-78 78 the connector to be mated before the screws the connector to be mated before the screws are fastened. are fastened. M-102 102 Dimensions in Inches (millimeters) are subject to change without notice. 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com D-2 E-Mail: sales glenair.com