INDEX
INDEX
Series 79 Micro-Crimp
Section E: Panel Mount Connectors, Crimp Termination
PANEL RECEPt ACLES WIth PIN CoNt ACtS, CRIMP tERMINA tIoN, 790-026P
790-026P connectors are designed for rear-panel mounting and are supplied with
A A
conductive panel gaskets. These connectors feature machined aluminum shells,
ufl orosilicone face seals and wire grommets for environmental protection. Contacts are
rear-release snap-in crimp type. Connectors are supplied with crimp contacts packaged
separately. Size #23 signal pins accept up to #22 AWG wire. Size #16 contacts accept
#16-18 AWG wire. Size #12 contacts accept #12-14 AWG wire. Size 12 and 16 cavities
also accept coaxial contacts purchased separately. Attach optional shielding adapters
B B
(799-016) for EMI protection.
HOW TO ORDER
Sample Part Number
C C
790-026P L-6P6 MT G
Shell Size -
Part Number Insert Arr. Shell Finish Hardware Option
D D
See Table 1 for
790-026P M
Available Insert
Rear Panel Mounted Electroless Nickel
Arrangements general purpose applications
Receptacle with Pin
Contacts
To order a connector
MT
without size #16 or #12
Nickel-PTFE
P
power pins, substitute
1000 Hour Grey
N Female Jackpost
W instead of P in the maximum corrosion protection
E E
No Hardware
and durability
insert arrangement.
(non-reflective grey)
Example:
ZNU
36P2 is supplied with 2
Zinc-Nickel with Black
power pins.
Chromate
tactical applications
F F
G S
36W2 is supplied less
(non-reflective black)
Guide Pin Female Guide Socket
the power pins.
See Section B for
Additional shell finishes are
coaxial contacts
listed on page C-9.
purchased separately.
G G
SPECIFICATIONS MATERIALS AND FINISHES
H H
Current Rating #23 5 AMPS, #16 13 A., #12 23 A. Shell Aluminum alloy
Dielectric Withstanding #23 500 VAC RMS, #12 and #16
Copper alloy, 50 microinches gold
Contacts
1800 VAC RMS plated
Voltage
Insulation Resistance 5000 megohms minimum Insulators Liquid crystal polymer (LCP)
Operating Temperature -65 C. to +150 C. Retention Clips Beryllium copper alloy
Shock 300 g. Interfacial Seal, Grommet Flourosilicone rubber
Vibration 37 g. Hardware 300 series stainless steel
Panel Gasket Fluorosilicone, conductive
Dimensions in inches (millimeters) and are subject to change without notice.
2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com E-Mail: sales@glenair.com
E-1
Rev. 04-July-2009
Panel
MountINDEXINDEX
Panel
INDEXINDEX
Mount
Series 79 Micro-Crimp
Section E: Panel Mount Connectors, Crimp Termination
Table 1 Contact Arrangements CRoSS-SECtIoNAL vIEW oF 790-026P
Contact
Quantity .195 (4.95)
RETAINING CLIP
AA AA
Layout #23#16#12 Face View
.025 (0.64)
FRONT INSULATOR
EMI GASKET
REAR INSULATOR
A-5 5
GROMMET
INTERFACIAL SEAL
POTTING
B-2P2 2
PIN CONTACT
B-9 9
WIRE (REF.)
BB BB
13
C-13
GUIDE PIN
D-15 15
3
D-3P3
SHELL
.007
CC D-7P2 5 2 CC
(0.18)
9 2
E-11P2
TABLE 2 HARDWARE OPTION
E-19 19
E-7P3 4 3
DD DD
F-15P2 13 2
F-23 23
5
F-5P5
N P
EE G-33 33 EE
No Mating Hardware Jackposts
Connector is supplied with threaded holes. Shell Connector is supplied with non-removable
6 4
h-10P4
sizes H and L have #6-32 threads, other sizes have stainless steel jackposts. Shell sizes H and L have
#4-40 threads. Thread depth is .150" (3.8). #4-40 UNC thread, other sizes have #2-56 thread.
h-29P7 22 7
Stainless steel.
H-36P2 34 2
FF FF
h-54P2 52 2
H-5P5 5
66
H-66
GG J-17P4 13 4 GG
G S
Guide Sockets
Guide Pins
23 2
J-25P2
Connector is supplied with stainless steel non-
Connector is supplied with stainless steel non-
removable bushings. Mates with type guide
removable guide pins. Mates with type guide
J-33 33
pins on corresponding plug connector.
sockets on corresponding plug connector.
7
J-7P7
HH HH
K-27P4 23 4
K-35P2 33 2
K-43 43
K-9P9 9
L-6P6 6
Dimensions in inches (millimeters) and are subject to change without notice.
2009 Glenair, Inc. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com E-Mail: sales@glenair.com
E-2
Rev. 04-July-2009