805-005-07M15-37SB Glenair

Series 805 Series 805 Mighty Mouse Triple-Start ACME Thread PCB or Solder Cup Receptacle 805-005 and 805-017 Ordering Information Printed Circuit Board/Solder Cup Receptacles feature low profile shells for minimum protrusion inside enclosures and integral standoffs for board washout. Contacts are non-removable. Water Immersion, Unmated Specify 805-005 connectors for applications where open face water immersion is not a requirement. For MIL-STD-810 Method 512G immersion requirements, specify 805-017 watertight connectors . These 805-017 connectors are specially sealed (MOD-518) and are 100% tested to maintain a -4 helium leak rate of 1 x 10 cc/second at one atmosphere pressure differential from -40 C to +70 C. How To Order Sample Part Number 805-017 -07 M 10-13 P B 805-005 = Receptacle with Standard Epoxy Potting Series 805-017 = Receptacle with Special MOD-518 Sealing For Open Face (unmated) Water Immersion Requirements. 100% Leak Tested. -02 = Square Flange Front or Rear Mount -12 = Square Flange Rear Mount Non-Locking Clinch Nuts Shell Style (See Table I) -22 = Square Flange Rear Mount Locking Clinch Nuts -07 = Jam Nut Rear Panel Mount C = Aluminum / Black Anodize (Non-Conductive) RoHS Compliant M = Aluminum / Electroless Nickel RoHS Compliant MT = Aluminum / Nickel-PTFE RoHS Compliant NF = Aluminum / Cadmium with Olive Drab Chromate Shell Material and Finish ZNU = Aluminum / Zinc-Nickel with Black Chromate Z1 = Stainless Steel / Passivated RoHS Compliant ZB = Stainless Steel / Olive Drab Chromate over Cadmium ZC = Stainless Steel / Zinc Cobalt Alloy/Black Chromate Shell Size - Insert See Contact Arrangements Page H-2 Arrangement P = Pin, PC Tail E = Pin, Solder Cup Contact Type S = Socket, PC Tail F = Socket, Solder Cup Shell Key Positions A = Normal B = Pos. B C = Pos. C D = Pos. D E = Pos. E F = Pos. F (See Table II) Table I: Shell Style Table II: Key Positions Key Rotation Key Position A B H Normal (A) 150 210 B 75 210 -02, -12, -22 -07 C 95 230 Square Flange Jam Nut D 140 275 E 75 275 F 95 210 Dimensions in Inches (millimeters) are subject to change without notice. 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com H-18 E-Mail: sales glenair.comSeries 805 Series 805 Mighty Mouse Triple-Start Threaded Coupling Contact Arrangements Mating Face View of Pin Connector Contact Arrangements (socket connector numbers are reversed) No. of Contacts Contact Arr. 23 20 20HD 16 12* 8** 1 1 2 2 1 2 1 2 8-1 1 3 6 6 8-23 3 7 3 8-4 4 3 3 5 4 4 5 4 8-6 6 8-1 8-23 8-4 8-6 8-7 9-1 8-7 7 9-1 1 9-25 5 8 2 1 9-10 10 2 1 2 1 2 9 7 3 1 2 1 10-2 2 3 7 3 13 6 7 4 8 10-28 8 3 5 8 10 10 12 10-13 13 6 4 9 5 4 4 11 5 10-200 4 2 9-25 9-10 10-2 10-28 10-13 11-4 4 11-210 10 11-19 19 2 1 2 1 3 1 2 2 1 11-200 4 2 8 3 4 7 11-201 8 2 9 10 4 3 12 8 12-2 2 4 7 16 13 6 5 12-5 5 4 3 17 6 5 19 18 12-26 26 10-200 11-4 11-210 11-19 12-200 12 1 12-201 4 2 12-202 8 2 3 2 1 1 2 2 1 2 4 1 13-31 31 4 3 6 5 15-2 2 5 3 15-3 3 10 7 6 5 4 9 8 15-7 7 11-200 11-201 12-2 12-5 15-220 20 *Arrangements with 12 contacts and available with keyed Twinax contacts. Use mode code -688 1 1 3 2 12 2 2 1 1 **Combo inserts using size 8 and 23 contacts order 3 2 4 6 3 11 size 23, 857-034 socket or 809-335 pin contacts 11 9 4 4 3 4 15 12 10 6 5 7 Contact Legend 18 16 9 5 23 21 9 8 23 20HD 20 16 12 8 25 24 6 10 6 5 26 7 12-26 12-200 12-201 12-202 1 1 2 H 1 2 4 1 2 1 13 3 9 5 7 3 2 1 12 14 4 13 8 15 10 20 22 18 14 6 3 16 11 7 19 28 24 23 25 29 10 6 33 29 31 30 3 2 7 37 34 9 5 4 8 13-31 15-2 15-3 15-7 15-220 15-37 Dimensions in Inches (millimeters) are subject to change without notice. 2014 Glenair, Inc. Series 80 Mighty Mouse U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com H-2 E-Mail: sales glenair.com 5