Series 811 Mighty Mouse High Density (HD) Shrink boots 809S060, 809SL060, 809A060, 809b060 and 809SU060 Shrink Boots Straight, Long Tail, 90, 45 and USB for Series 811 Connectors Protect Your Cable Harness with heat-shrinkable boots. These easy-to-use boots provide excellent electrical, mechanical and environmental protection. Heating the boot causes the boot to shrink onto the connector and cable . An adhesive lining bonds the boot to the connector and cable and lfi ls small gaps for a complete seal. Choose straight cable exit or right angle exit. These lipped boots attach directly to Series 811 Mighty Mouse HD connectors with integral band platform. After shrinking, the boot lip locks into groove. Choose Type 1 high performance elastomer for extreme temperatures and excellent resistance to fuels and oils or Type 2 non-halogenated flame-retardant polyolefin for use where limited fire hazard is required. Material Selection guide Type 1 Type 9 High Performance Type 2 Low-Temp Semi-r igid Zero Halogen Flexible Polyolefin Attribute elastomer Polyolefin USB ONLY Continuous Operating Temp. -75 to +150C -40 to +130C -40 to +100C Resistance to Fuels, Oils Excellent Very Good Very Good Low Toxicity, Zero Halogen No Yes No Type 1 High performance Elastomer Semi-rigid high performance boots combine excellent resistance to fuels, oils CONNECTOR HEATSHRINK and solvents with superior performance at extreme temperatures. Rated for BOOT 3000 hours continuous operation at +150 C, these boots fit most standard boot adapters for circular connectors. Material meets the requirements of VG95343 Type 6, BSG 198-5-DE, EN62329-102 and SAE AS5258 Type H. These boots are recommended for demanding applications such as military vehicles and petrochemical exploration. Standard Black color. BOOT LIP LIPPED BOOT Type 2 Zero halogen Halogen-free polyolefin boots meet low smoke and toxicity requirements of shipboard, transit and aircraft systems. These Low Smoke/Zero Halogen (LSZH) boots fit most standard shrink boot adapters, including M85049 types along with Glenair Series 31 and Series 44 adapters. Oxygen index greater than 30%, smoke index less than 20, and toxicity index under 3 per 100 grams. Material meets requirements of NAVSEA 5617649, VG95343 Part 29, BSG 198-5-DF, EN62329-101 and SAE AS5258 Type G. Resistance to oils, fuels and solvents. The boots provide strain relief and environmental protection to connector/cable transitions. Temperature rating -40 C to +130 C. Standard Black color. Type 9 Low Temp installable Flexibile Polyolenfi (Standard for USB) Lipped Straight USB Shrink Boots are available only in Type 9 Flexible Polyolefin which is designed for a low installation temperature of less than 80C. Operating temperature range of -40C to 100C. Standard Black color. Dimensions in Inches (millimeters) are subject to change without notice. 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com 27 E-Mail: sales glenair.com 11 - JULY - 2013 Mighty Mouse High DensityMighty Mouse High Density Series 811 Mighty Mouse High Density (HD) Shrink boots boot Material Properties Adhesive Lined Boot Material Properties Heat-shrink boots are not watertight unless equipped with factory-installed or user-installed adhesives. When heat is applied to the boot, the adhesive melts and fixes the boot to the adapter and cable jacket to provide the necessary sealing as well as mechanical strain-relief. Hot melt thermoplastic polyamide adhesive is compatible with most cable jackets, economical and easy to install. Shrink boot Typical Material Properties Shrink boot Fluid Resistance Type 1 Type 2 Type 9* Type 1 Type 2 High Performance Zero Halogen Low Temperature High Performance Zero Halogen Property Elastomer Polyolefin Flexible Polyolefin Fluid Elastomer Polyolefin Flexibility Semi-rigid Semi-flexible Flexible Lubricating Oil Very good Good Hydraulic Fluid Very Good Good Operating Temperature Range -75C to +150C -40C to +130C -40C to +100C Aviation Fuel Very Good Good Shrink Temperature (min.) 135C 135C <80C Gasoline Very Good Fair Tensile Strength (psi) 1700 1100 1740 De-Icing Fluid Excellent Very Good Elongation (% min.) 400 250 500 Automotive Diesel Good Fair Long Term Heat Aging 3000 hrs, 150C 3000 hrs, 135C 168 hrs, 150C Heat Shock 4 hrs, 215C 4 hrs, 215C 4 hrs, 160C Heat Aging 168 hrs, 160C 168 hrs, 160C 168 hrs, 160C W1 and W2 Adhesive Properties Dielectric Strength (V/mil) 300 380 10 M W1 W2 13 12 12 Volume Resistivity (ohms-cm) 10 10 10 Standard Standard Attribute High Temperature Hot Melt Adhesive Water Absorption (%) 0.5 0.5 0.5 Hot Melt Adhesive For USB Type 9 (All Boots Except USB) Boots Only Burn Time <15 sec Burn Time <15 sec Burn Time <120 sec Flammability Burn Length <25mm Burn Length <25mm Burn Length <25mm Boot Material Compatibility Type 1 and 2 Type 9 Only RoHS Compliant Yes Yes Yes Continuous Operating Temp. -55 to +125C -40 to +80C Resistance to Fuels, Oils & Fluids Good Good Oxygen Index (% min.) N/A 30 N/A Low Toxicity, Zero Halogen Yes Yes Temperature Index (C) N/A 250 N/A Smoke Index (max.) N/A 20 N/A Toxicity Index (max.) N/A 3 N/A * Note: Type 9 Low-Temp Flexible Polyolefin is the standard material for the USB Shrink Boot. Material Color options for Type 1 High Performance Elastomer only Add optional Color Mod Code to End of Any Type 1 Material Part Number Color Similar to (Reference) Color Similar to (Reference) Mod Code Mod Code 632 B Blue PANTONE 3005U 632 R Red PANTONE 1797U 632 E Grey FED-STD-595 36270 632 T Tan FED-STD-595 33446 632 G Green PANTONE 355U 632 W White FED-STD-595 37875 632 P Purple FED-STD-595 37100 632 Y Yellow PANTONE YELLOW U 632 O Orange FED-STD-595 32300 Standard Black FED-STD-595 37038 2011 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com 28 E-Mail: sales glenair.com 11 - JULY - 2013