854-001-02F Glenair

Series 791 Connectors Ultraminiature Rectangular Connectors Datalink Contacts for Series 791 Connectors Size 8 Differential Twinax Contacts Differential twinax contacts accept 100 ohm shielded twisted pair cable. These snap-in, rear- release contacts fit Glenair Series 79 connectors. Crimp termination. 24 and 26 AWG versions. Pin Contact Gold-plated copper alloy. Supplied unassembled with sealing boot and instruction sheet. Size 8 Differential Twinax Contacts Wire Size Impedance Socket Shielded Twisted Pair Cable Pin Contact (AWG) (ohms) Contact GSC-03-83971-00 (Gore) 24 100 853-014-02F 853-026-01F 0024A0024 (TE Raychem) 24 100 853-014-04F 853-026-02F Socket Contact DXN2603 (Gore) 26 100 853-014-09F 853-026-04F M17/176-00002 24 77 853-014-05F 853-026-05F Technical Data Pin Contact 853-014 Specifications .900/.840 (22.9/21.3) Operating temperature: -65 C to +175 C .111 (2.82) POLARIZATION KEY .033/.029 Operating frequency 100 ohm (0.84/0.74) versions: DC 3GHz .316/.313 Operating frequency 77 ohm versions : .276/.271 .219/.217 (8.03/7.95) (7.01/6.88) (5.56/5.51) DC 20MHz Dielectric withstanding voltage, inner .218 (5.54) .0250 .0005 (0.64 0.013) contact to inner contact: 1000 Vrms HEX CRIMP .305/.295 TWO PLACES Dielectric withstanding voltage, inner (7.75/7.49) contact to outer body: 500 Vrms Insulation resistance: 5000 megohms min. Contact resistance, inner contacts: 55 millivolt max. voltage drop 1 ampere Socket Contact 853-026 Contact resistance, outer body: 75 millivolt max. voltage drop 12A .900/.840 .316/.313 (22.9/21.3) Durability: 500 mating cycles (8.03/7.95) INNER CRIMP POLARIZATION .033/.029 BUSHING KEY Construction (0.84/0.74) Inner contacts, outer body: copper alloy, .288/.284 .276/.271 50 microinches gold over nickel plating (7.32/7.21) (7.01/6.88) Crimp ferrule: copper alloy, 50 microinches gold over nickel plating .218 (5.54) SKT TO ACCEPT HEX CRIMP .111 (2.82) Insulators: PPS .289/.279 .025 (0.64) PIN (7.34/7.09) Sealing boot: fluorosilicone rubber 2 PLACES grommet, glass-filled PEI follower Sealing Boot Crimp Tools, Removal Tool Sealing boots are supplied with contacts. To Inner Contacts Outer Body Contact Part Removal order contacts without sealing boots, delete the Number Crimper Positioner Crimper Hex Die Tool F suffix from the part number 853-014 809-015 809-240 809-129 859-007 859-049 853-026 (M22520/2-01) (M22520/2-37) (M22520/5-01) (M22520/5-45) (M81969/14-12) Inner Contact Crimp Tools Outer Body Crimp Tools Removal Tool .985 (25.02) MAX .350 .326 (8.89) (8.28) 809-015 809-240 809-129 859-007 859-049 (M22520/2-01) (M22520/2-37) (M22520/5-01) (M22520/5-45) (M81969/14-12) 72 2017 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com U.S. CAGE code 06324 Series 791 Dimensions in Inches (millimeters) are subject to change without notice. 1 4 3 2Series 791 Connectors Ultraminiature Rectangular Connectors Datalink Contacts for Series 791 Connectors Size 8 Quadrax Contacts Quadrax contacts are size 8 multi-pin contacts with four signal pins and an outer contact body. Pin Contact Crimp termination. Compatible with Glenair Series 79 connectors. Supplied as unassembled kit. Size 8 100 Ohm Quadrax Contacts Cable Accomodation Wire Size Ref Cable Socket Pin Contact (AWG) Dia. Mfgr. Part Number Contact PIC E51424 .160 24 Gore GSC-03-84608-00 Socket Contact 854-001-02F 854-019-02F (4.06) Tensolite NF24Q100-01 Technical Data Draka F 4704-4 .175 24 854-001-04F 854-019-04F Specifications (4.45) PIC E50424 Operating temperature: -65 C to +175 C Tensolite NF26Q100-01 .137 26 854-001-01F 854-019-01F Operating frequency: DC 3 GHz (3.48) PIC E51426 Characteristic Impedance: 100 10 ohms Pin Contact 854-001 Dielectric withstanding voltage, inner to inner contact: 1000 Vrms sea level, .920 POLARIZATION 250 Vrms 70,000 feet. (23.37) .033/.029 KEY .111 (2.82) (0.84/0.74) Dielectric withstanding voltage, inner to outer contact: 500 Vrms sea level, .276/.271 .219/.217 .316/.313 250 Vrms 70,000 feet. (7.01/6.88) (5.56/5.51) (8.03/7.95) Contact resistance, inner contacts: 55 millivolt max. voltage drop 1 ampere .305/.295 .025 (0.64) .111 (2.82) (7.75/7.49) Contact resistance, outer body: 75 millivolt max. voltage drop 12A (PIN NO. DESIGNATION .218 (5.54) HEX CRIMP NOT MARKED ON PART) Insulation resistance: 5000 megohms min. Contact resistance, inner contacts: 55 millivolt max. voltage drop 1 ampere Contact resistance, outer body: 75 Socket Contact 854-019 millivolt max. voltage drop 12A (PIN NO. DESIGNATION .900/.840 NOT MARKED ON PART) (22.9/21.3) Durability: 500 mating cycles POLARIZATION .033 (0.84) .111 (2.82) KEY Construction .029 (0.74) Inner contacts, outer body: copper alloy, .276/.271 .288/.284 .316/.313 50 microinches gold over nickel plating (7.01/6.88) (7.32/7.21) (8.03/7.95) Crimp ferrule: copper alloy, 50 microinches gold over nickel plating .111 (2.82) .289/.279 Insulators: PPS .218 (5.54) SKT TO ACCEPT (7.34/7.09) HEX CRIMP Sealing boot: fluorosilicone rubber .025 (0.64) PIN grommet, glass-filled PEI follower 2 PLACES Sealing Boot Crimp Tools, Removal Tool Sealing boots are supplied with contacts. To Inner Contacts Outer Body Contact Removal order contacts without sealing boots, delete the PN Crimper Positioner Crimper Hex Die Tool F suffix from the part number 854-001 809-015 809-240 809-129 859-007 859-049 854-019 (M22520/2-01) (M22520/2-37) (M22520/5-01) (M22520/5-45) (M81969/14-12) Inner Contact Crimp Tools Outer Body Crimp Tools Removal Tool .985 (25.02) MAX .350 .326 (8.89) (8.28) 809-015 809-240 809-129 859-007 859-049 (M22520/2-01) (M22520/2-37) (M22520/5-01) (M22520/5-45) (M81969/14-12) 2017 Glenair, Inc 1211 Air Way, Glendale, CA 91201 818-247-6000 www.glenair.com U.S. CAGE code 06324 Series 791 73 Dimensions in Inches (millimeters) are subject to change without notice. 11 44 1 4 33 22 2 3