Fiber Optic M29504/5 181-001 Size 16 MIL-DTL-38999 Type Fiber Optic Socket Terminus D38999 Series III Ultra low dB loss QPLd Socket Terminus for MIL-DTL-38999 Glenairs unique alignment techniques maximize optical performance and provide reliable, repeatable interconnection of optical fibers. Ferrule design, critical to the performance of the termini, has traditionally relied on a machined stainless steel ferrule incorporating a precision micro drilled hole. Glenairs unique precision ceramic ferrules, with concentricity and diametric tolerances controlled within a micron (.00004 of an inch) meet the needs of high bandwidth and low allowable insertion loss applications. In fact, Glenairs ferrules are approximately 10 times more accurate than alternative designs, and have reduced insertion loss values from 1.5dB to less than .5dB (typical loss for Glenair termini is .3 dB)346 (8.8) .265 (6.7) Protective Cover Alignment Sleeve C (Included with Terminus) Protective Cover 1.132 (28.8) Alignment Sleeve .100 (2.5) 1.025 (26.0) .031 (0.8) .130 (3.3) Max .537 (13.6) .069 (1.8) A .158 (4.0) Min .062 (1.6) .117 (3.0) Max Shrink Tube .500 (12.7) .080 (2.0) Max Dia. Cable Bottoming Surface Material and Finish Ferrule: Zirconia Ceramic Alignment Sleeve: Zirconia Ceramic or Stainless Steel/Passivate. Terminus Assembly: Stainless Steel/Passivate Spacer, Spring, and Cover: Stainless Steel/Passivate Shrink Tube: Kynar Accessories Alignment Sleeve & Protective Cover can also be ordered separately (Table II). Assembly See assembly procedure GAP-015 for complete termination instructions. Recommended insertion/Extraction tool: P/N: M81969/14-03 or equivalent 2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 C-4M29504/5 181-001 Size 16 MIL-DTL-38999 Type Fiber Optic Socket Terminus Fiber Size A Dia. Reference Only Part Number Core/Cladding* (Microns) M29504/5-XXXX 181-001-125 9/125 (Single Mode) 125.5 M29504/5-4237 181-001-126S 9/125 (Single Mode) 126.0 M29504/5-4238 181-001-126 50/125 & 62.5/125 126.0 M29504/5-4239 181-001-127 50/125 & 62.5/125 127.0 M29504/5-4046 181-001-142 100/140 142.0 M29504/5-4049 181-001-144 100/140 144.0 N/A 181-001-145 100/140 145.0 M29504/5-4050 181-001-156 62.5/125/155 (Polyimide) 156.0 M29504/5-4240 C 181-001-157 62.5/125/155 (Polyimide) 157.0 M29504/5-4241 181-001-173 100/140/172 (Polyimide) 173.0 M29504/5-4088 181-001-175 100/140/172 (Polyimide) 175.0 M29504/5-4242 181-001-231 200/230 231.0 N/A 181-001-236 200/233 236.0 M29504/5-4243 181-001-286 200/280 286.0 M29504/5-4244 181-001-448 400/440 448.0 M29504/5-4245 181-001-533 486/500 533.0 N/A Ceramic alignment sleeve supplied with terminus. Add K to the end of part number development to supply with optional stainless steel alignment sleeve e.g. 181-001-126K. Accessories Part Description Number 181-001-S Ceramic Alignment Sleeve Stainless Steel 181-001-K Alignment Sleeve 181-001-C Protective cover 2011 Glenair, Inc. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 C-5 Fiber Optic