AS85049 AS85049/109 Straight RFI/EMI Shield-Sock Metal Shrink Boot Adapter with Optional Detented or Non-Detented Self-Locking or Non-Self-Locking Coupling Nut CONNECTOR DESIGNATOR: Product Series and Shell Size Shield Finish Entry Size Drain Hole (Table I) (Table IV) (Table II) (Omit for None) Basic Part Number AS50151 Series AS34001 MIL-DTL-26482 Series II AS81703 Series III MIL-DTL-83723 Series I & III 40M39569, DEF 5326-3 M85049/109 S 10 T W 03 - 6 D A EN 2997, EN 3646 ESC 10, ESC 11, LN 29504 NFC93422 Series HE302 B PAN 6432-1, PAN 6432-2 Braid Length S = Detented, Self-Locking PATT 602 Finish 1 Inch Increments, = Non-Self-Locking (Use Dash) (Table III) 6 Min., 18 Max N = Non-Detented, Self-Locking See Note 9 Coupling Nut 1.19 (30.2) Length A Thread .50 (12.7) Z B W See Note 5 Y Marking Location Optional Single Layer Shield Knurl Style Mfr .075 (1.9) Option - Typ (Ref) See Note 8 .140 (3.56) .130 (3.30) Adapter Body Dimensions in inches (millimeters) and are subject to change without notice. 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com B-114 E-Mail: sales glenair.comAS85049/109 Straight RFI/EMI Shield-Sock Metal Shrink Boot Adapter with Optional Detented or Non-Detented Self-Locking or Non-Self-Locking Coupling Nut TABLE I: Shell Size, Entry Size, Thread and Dimensions TABLE II: Entry Size and Dimensions Shell Size Shell Size Accessory Allowable Shell Size A B Max MIL-DTL-5015, MIL-DTL-26482, Series II Shell Size Cable AS81703, Series III Y MIL-DTL-83723, Series III Series I and II Thread Class 2B Diameter Entry W z (Ref) Code Entry Size +.008 (.20) (Ref) (Ref) Size .020 (.51) Max -.000 (.00) 03 01 3 - - 9/16-24 UNEF .855 (22.48) 01 .250 (6.4) .044 (1.12) .560 (14.2) 08 01 - 8 8S 1/2-20 UNF .885 (22.48) 10 01-03 - 10 10S & 10SL 5/8-24 UNEF 1.010 (25.65) 02 .312 (7.9) .044 (1.12) .630 (16.0) 03 .375 (9.5) .044 (1.12) .690 (17.5) 12 01-05 7 12 12S & 12 3/4-20 UNEF 1.135 (28.83) B 04 .438 (11.1) .044 (1.12) .750 (19.1) 14 02-06 12 14 14S & 14 7.8-20 UNEF 1.260 (32.00) 05 .500 (12.7) .044 (1.12) .820 (20.8) 16 04-08 19 16 16S & 16 1-20 UNEF 1.385 (35.18) 06 .562 (14.3) .044 (1.12) .890 (22.6) 18 05-09 27 18 18 1 1/16-18 UNEF 1.510 (38.35) 07 .625 (15.9) .044 (1.12) .950 (24.1) 20 07-11 37 20 20 1 3/16-18 UNEF 1.635 (41.53) 08 .688 (17.5) .044 (1.12) 1.020 (25.9) 22 09-13 - 22 22 1 5/16-18 UNEF 1.760 (44.70) 09 .750 (19.1) .069 (1.75) 1.120 (28.4) 24 11-14 - 24 24 1 7/16-18 UNEF 1.885 (47.88) 10 .812 (20.6) .069 (1.75) 1.200 (30.5) 28 14-16 - - 28 1 3/4-18 UNS 2.135 (54.23) 11 .875 (22.2) .069 (1.75) 1.270 (32.3) 32 16-17 - - 32 2-18 UNS 2.395 (60.83) 12 .938 (23.8) .069 (1.75) 1.260 (32.0) 36 17-19 - - 36 2 1/4-16 UN 2.635 (66.93) 13 1.000 (25.4) .069 (1.75) 1.370 (34.8) 40 19-21 - - 40 2 1/2-16 UN 2.885 (73.28) 14 1.125 (28.6) .069 (1.75) 1.470 (37.3) 44 21-23 - - 44 2 3/4-16 UN 3.135 (76.63) 15 1,250 (31.8) .069 (1.75) 1.600 (40.6) 48 23-25 - - 48 3-16 UN 3.385 (85.98) 16 1.375 (34.9) .069 (1.75) 1.710 (43.4) 61 12-14 61 - - 1 1/2-18 UNEF 1.885 (47.88) 17 1.500 (38.1) .086 (2.18) 1.840 (46.7) Table III: Symbol and Finish Table IV: Symbol and Finish 18 1.625 (41.3) .086 (2.18) 2.000 (50.8) Symbol Finish Symbol Finish 19 1.750 (44.5) .086 (2.18) 2.120 (53.8) 20 1.875 (47.6) .086 (2.18) 2.270 (57.7) N Electroless Nickel K Nickel Plate 21 2.000 (50.8) .086 (2.18) 2.440 (62.0) Cadmium/Olive Drab over Electroless T Tin Plate W Nickel (1000 Hour Salt Spray) 22 2.125 (54.0) .086 (2.18) 2.600 (66.0) Table V: (Manufacturers Option) X Nickel Flurocarbon Polymer 23 2.250 (57.2) .086 (2.18) 2.750 (69.9) Material Finish Z Zinc Nickel 24 2.375 (60.3) .086 (2.18) 2.900 (73.7) Copper Tin Plate 25 2.500 (63.5) .086 (2.18) 3.060 (77.7) Stainless Steel Passivated APPLICATION NOTES 1. Metric equivalents are given for general information only and shall be specified as in Table V. are based on 1.000 inch (25.40 mm). 6. Shrink boot (when required) shall be as specified in AS5258. 2. Dimensions are in inches and apply after plating. Accessory 7. Termination of rthe accessory shield with harness shield configuration is optional within the specified dimension may be performed with a AS85049/93 shield support ring or envelope. similar split ring accessory types. 3. Adapter length is measured from the bottom of the accessory 8. Three (3) holes equally spaced shall be provided and teeth to the adapter that is covered by the braid, The adapter accommodate .020 (.51) maximum safety wire for the non- surface under the braid shall be ribbed knurled or have a self-locking coupling configuration. surface roughness of .125 R minimum in accordance with ANSI 9. Drain holes will be provided with a.125 (3.2 mm) diameter, B46.1. 4 places equally spaces (optional, see part number 4. Pig tail terminated braid material shall be in accordance with development). TableIV. Braid length is defined by Note 1 as shown in the part 10. Material/Finish: or indentifying number (PIN). Adapter, coupling nut - Al alloy/See Table III 5. Termination band configuration is not controlled. Band with Band - See Table V, manufacturers option buckle may exceed the Z dimension (See Table II) provided Braid - Copper/See Table IV the band does not interfere with boot attachment, band material Dimensions in inches (millimeters) and are subject to change without notice. 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com B-115 E-Mail: sales glenair.com AS85049