M85049/120S18W Glenair

AS85049 AS85049/120 90 Strain Relief Self-Locking or Non-Self-Locking Dash No. Finish CONNECTOR DESIGNATOR: Product Series and Table I Table II Basic Part Number Page 62-26 Page 62-26 AS5015 Series AS34001 Crimp, MIL-DTL-26482 Series II, A SAE-AS1703 Crimp Series III, MIL-DTL-83723 Series I & III M85049/120 S 08 W S = Detented Self-Locking B N = Non-Detented Self-Locking Use Dash () for Non-Self-Locking (See Note 5) E Coupling Nut D C Captive Screw A Thread Self-locking Nut Typ .125 (3.2) Drain Holes 3 Min, Equally Spaced B G Knurl Style Optional F J .060/.380 (1.52/9.65) Screw Extension H APPLICATION NOTES 1. Assembly to be identified with manufacturers name and part number, space permitting. 2. Glenair Series 600 Backshell Assembly Tools are recommended for assembly and installation. 3. Metric equivalents in parentheses (mm) are given for general information only and are based on 1.000 inch = 25.4 mm. 4. Cable entry is measured with saddle bars closed and bottomed on clamp ears. 5. Detented self-locking has a positive audible detented coupling. 6. Material/Finish: Clamp body, coupling nut, saddles - Al alloy or 300 Series SST/See Table II. Clamp screws and lock nuts - CRES/Passivated, Silver plate optional. Anti-rotation device - Corrosion resistant material Dimensions in inches (millimeters) and are subject to change without notice. 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com B-126 E-Mail: sales glenair.comAS85049/120 90 Strain Relief Self-Locking or Non-Self-Locking TABLE I: Dash Number, Shell Size, Thread and Dimensions (Continued Below) Dash Screw MIL-DTL-83723 MIL-DTL-5015 AS81703 MIL-DTL-26482 A Thread B Dia C Dim D E Max No. Size Series III MS3400 Series Series III Series II Class 2B Max .031 (0.8) Max Length 03 4-40 3 9/16-24 UNEF .95 (24.1) .219 (5.6) .93 (23.6) 1.29 (32.8) 08 4-40 8 8S 8 1/2-20 UNF .89 (22.6) .219 (5.6) .93 (23.6) 1.29 (32.8) 10 4-40 10 10S, 10SL 10 5/8-20 UNEF 1.01 (25.7) .264 (6.7) 1.02 (25.9) 1.38 (35.1) 12 4-40 12 12, 12S 7 12 3/4-20 UNEF 1.14 (29.0) .344 (8.7) 1.21 (30.7) 1.57 (39.9) 14 4-40 14 14.14S 12 14 7/8-20 UNEF 1.26 (32.0) .460 (11.7) 1.27 (32.3) 1.63 (41.4) 16 4-40 16 16, 16S 19 16 1-20 UNEF 1.39 (35.3) .545 (13.8) 1.42 (36.1) 1.78 (45.2) B 18 6-32 18 18 27 18 1 1/16-18 UNEF 1.51 (38.4) .615 (15.6) 1.53 (38.9) 1.89 (48.0) 20 6-32 20 20 37 20 1 3/16-18 UNEF 1.64 (41.7) .698 (17.7) 1.65 (41.9) 2.01 (51.1) 22 6-32 22 22 24 1 5/16-18 UNEF 1.176 (44.7) .780 (19.8) 1.78 (45.2) 2.14 (54.4) 24 8-32 24 24 1 7/16-18 UNEF 1.89 (48.0) .850 (21.6) 1.90 (48.3) 2.26 (57.4) 28 8-32 28 1 3/4-18 UNS 2.14 (54.4) .950 (24.1) 2.20 (55.9) 2.72 (69.1) 32 8-32 32 2-18 UNS 2.40 (61.0) 1.015 (25.8) 2.27 (57.7) 2.79 (70.9) 36 8-32 36 2 1/4-16 UN 2.64 (67.1) 1.187 (30.1) 2.39 (60.7) 3.91 (73.9) 40 8-32 40 2 1/2-16 UN 2.89 (73.4) 1.220 (31.0) 2.52 (64.0) 3.04 (77.2) 44 8-32 44 2 3/4-16 UN 3.14 (79.8) 1.500 (38.1) 2.77 (70.4) 3.29 (83.6) 48 8-32 48 3-16 UN 3.39 (86.1) 1.625 (41.3) 2.89 (73.4) 3.41 (86.6) 61 8-32 61 1 1/2-18 UNEF 1.95 (49.5) .850 (21.6) 1.90 (48.3) 2.26 (57.4) TABLE I: (Continued from Above) Dash Screw MIL-DTL-83723 MIL-DTL-5015 AS81703 MIL-DTL-26482 F Dim G Dim H Dim J Dim No. Size Series III MS3400 Series Series III Series II Max Max Max Max 3 .84 (21.3) 1.32 (33.5) .88 (22.4) .710 (18.0) 03 4-40 8 8S 8 .81 (20.6) 1.26 (32.0) .88 (22.4) .710 (18.0) 08 4-40 10 10S, 10SL 10 .87 (22.1) 1.38 (35.1) .94 (23.9) .710 (18.0) 10 4-40 12 12, 12S 7 12 .93 (23.6) 1.50 (38.1) 1.12 (28.4) .710 (18.0) 12 4-40 14 14.14S 12 14 1.00 (25.4) 1.62 (41.4) 1.19 (30.2) .710 (18.0) 14 4-40 16 4-40 16 16, 16S 19 16 1.06 (26.9) 1.75 (44.5) 1.44 (36.6) .710 (18.0) 18 6-32 18 18 27 18 1.23 (31.2) 1.99 (50.5) 1.56 (39.6) .710 (18.0) 20 6-32 20 20 37 20 1.30 (33.0) 2.07 (52.6) 1.69 (42.9) .710 (18.0) 22 6-32 22 22 24 1.36 (34.5) 2.25 (57.2) 1.75 (44.5) .710 (18.0) 24 8-32 24 24 1.42 (36.1) 2.37 (60.2) 1.88 (47.8) .710 (18.0) 28 8-32 28 1.63 (41.4) 2.70 (68.6) 2.12 (53.8) .890 (22.6) 32 8-32 32 1.86 (47.2) 3.05 (77.5) 2.50 (63.5) .890 (22.6) 36 8-32 36 1.98 (50.3) 3.30 (83.8) 2.62 (66.5) .890 (22.6) 40 8-32 40 2.10 (53.3) 3.55 (90.2) 2.68 (68.1) .890 (22.6) 44 8-32 44 2.36 (59.9) 3.93 (99.8) 3.00 (76.2) .890 (22.6) 48 8-32 48 2.48 (63.0) 4.18 (106.2) 3.50 (88.9) .890 (22.6) 61 8-32 61 1.45 (36.8) 2.43 (61.7) 1.88 (47.8) .710 (18.0) TABLE II: Material and Finish Symbol Material Finish A Black Anodize N Electroless Nickel W Cadmium, Olive Drab Aluminum Alloy X Nickel Fluorocarbon Polymer Pure Dense Electrodeposited Y Aluminum Z Zinc Nickel S 300 Series SST Passivated Dimensions in inches (millimeters) and are subject to change without notice. 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com B-127 E-Mail: sales glenair.com AS85049