M85049/142-05AC Glenair

AS85049 AS85049/142 Wye Transition Wide Body Heat Shrink Boot Dash Material Injection Number Vent-Ports Basic Table II Part Number Table I See Note 2 Omit for None M85049/142 - 05 H C P B Adhesive C = Adhesive Lined U = No Adhesive Table III Optional .180 (4.57) Optional Injection Port J Dia .120 (3.05) R Vent Port 2230 5 J Dia JW (C1) H Dia H Dia H K Dia KW (C2) HW T P As Supplied S See As Recovered K Dia Note 2 Dimensions in inches (millimeters) and are subject to change without notice. 2013 Glenair, Inc. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com B-158 E-Mail: sales glenair.comAS85049/142 Wye Transition Wide Body Heat Shrink Boot TABLE I: Dash Number and Dimensions H Dia H Dia J & K Dia J & K Dia P R S T HW JW & KW Dash Min Max Min Max (As Recovered) (As Recovered) (As Recovered) (As Recovered) (As Recovered) (As Recovered) No. (As Supplied) (As Recovered) (As Supplied) (As Recovered) Ref Ref 10% 10% 20% 20% 05 0.520 (13.2) 0.240 (6.1) 0.260 (6.6) 0.130 (3.3) 0.880 (22.4) 0.760 (19.3) 0.940 (23.9) 0.610 (15.5) 0.060 (1.5) 0.040 (1.0) 06 1.060 (26.9) 0.490 (12.4) 0.520 (13.2) 0.240 (6.1) 1.500 (38.1) 1.700 (43.2) 2.100 (53.3) 1.300 (33.0) 0.100 (2.5) 0.060 (1.5) 07 1.520 (38.6) 0.710 (18.0) 1.060 (26.9) 0.490 (12.4) 2.580 (65.5) 3.100 (78.7) 3.100 (78.7) 2.200 (55.9) 0.120 (3.0) 0.100 (2.5) 08 2.190 (55.6) 1.020 (25.9) 1.060 (26.9) 0.500 (12.7) 3.350 (85.1) 3.700 (94.0) 4.400 (111.8) 2.800 (71.1) 0.180 (4.6) 0.100 (2.5) B TABLE II: Shrink Boot Materials TABLE III: Adhesive Description Material Color Compound Material Description Symbol Adhesive Description Code Code A 2071 Flexible Polyolefin WHITE C Zero Halogen / Hot Melt B 2040 General Purpose Polyolefin RED G 2010 Zero Halogen Polyolefin GREEN H 2025 High Performance Elastomer BLUE APPLICATION NOTES 1. See bag identification for matching boot number, matching dash number on boot. See part number development for full description. 2. Encircled material letter designator located on O.D. approximately mid length along the K end. See part number development for full description. 3. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. 2013 Glenair, Inc. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 8.29.14 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com B-159 E-Mail: sales glenair.com AS85049