M85049/15G9W Glenair

AS85049 AS85049/15 and AS85049/16 45 and 90 Qwik-Ty Strain Reliefs Self-Locking Coupling Optional Ground Lug CONNECTOR DESIGNATOR: Configuration = Non-Self-Locking MIL-DTL-38999, Series III and IV N = Non-Detented H EN3645 G = Self-Locking with Ground Lug SELF-LOCKING H = Non-Detented with Ground Lug S = Self-Locking without Ground Lug COUPLING Finish A = Anodize, Black N = Electroless Nickel Basic Part Number W = 1,000 Hour Cadmium Olive Drab B over Electroless Nickel M85049/15 = 45 M85049/15 G 11 N X = Nickel Fluorocarbon Polymer M85049/16 = 90 Y = Pure Dense Electrodeposited Aluminum Shell Size Z = Zinc-Nickel, Black G M85049/16S = A Thread .50 (12.7) Max Typ. M85049/16G = .69 (17.5) Max E E Dia Dia H F Ground Lug MS3367-1 Typical on Tie Strap or F M85049/15G and Equivalent M85049/16G only (Typical) TABLE I: Shell Size, Thread, Cable Entry and Backshell Dimensions Shell A Thread E Dia F Max M85049/15S M85049/15G M85049/16 Size Class 2B Max Cable Entry G Max G Max H Max 9 M12 X 1 - 6H .860 (21.8) .264 (6.7) 1.030 (26.2) 1.210 (30.7) 1.220 (31.0) 11 M15 X 1 - 6H .984 (25.0) .392 (10.0) 1.030 (26.2) 1.210 (30.7) 1.290 (32.8) 13 M18 X 1 - 6H 1.160 (29.5) .506 (12.9) 1.030 (26.2) 1.390 (35.3) 1.620 (41.1) 15 M22 X 1 - 6H 1.280 (32.5) .631 (16.0) 1.090 (27.7) 1.390 (35.3) 1.660 (42.2) 17 M25 X 1 - 6H 1.410 (35.8) .756 (19.2) 1.110 (28.2) 1.390 (35.3) 1.720 (43.7) 19 M28 X 1 - 6H 1.520 (38.6) .845 (21.5) 1.210 (30.7) 1.390 (35.3) 1.720 (43.7) 21 M31 X 1 - 6H 1.640 (41.7) .970 (24.6) 1.260 (32.0) 1.390 (35.3) 1.790 (45.5) 23 M34 X 1 - 6H 1.770 (45.0) 1.095 (27.8) 1.300 (33.0) 1.390 (35.3) 1.850 (47.0) 25 M37 X 1 - 6H 1.890 (48.0) 1.220 (31.0) 1.340 (34.0) 1.390 (35.3) 1.910 (48.5) APPLICATION NOTES 1. Assembly identified with manufacturers name and part number, space permitting. 2. For complete dimensions, see the applicable Military Specification. 3. Cable entry is defined as the accomodation range for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. 4. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. 2013 Glenair, Inc. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 9.15.14 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com B-36 E-Mail: sales@glenair.com