AS85049/17 Straight EMI/RFI Environmental Backshell Finish CONNECTOR DESIGNATOR: N = Electroless Nickel X = Aluminum, Nickel Flurocarbon Polymer MIL-DTL-38999 Series I and II W = 1,000 Hr. Cadmium Olive Drab Z = Aluminum, Zinc-Nickel, Black F over Electroless Nickel M85049/17 10 N 03 A B Length Code Basic Dash Number Clamp Size (Table IV) Part Number (Table I) (Table III) Omit for Standard TABLE I: Shell Size, Thread and Dimensions Shell Shell A Thread B Dia Dash Size Size Class 2B Max No. Series I Series II 08 09 08 .438 - 28 UNEF .570 (14.5) 10 11 10 .562 - 24 UNEF .700 (17.8) 12 13 12 .688 - 24 UNEF .830 (21.1) 14 15 14 .813 - 20 UNEF .950 (24.1) 16 17 16 .938 - 20 UNEF 1.080 (27.4) 18 19 18 1.063 - 18 UNEF 1.200 (30.5) 20 21 20 1.188 - 18 UNEF 1.330 (33.8) 22 23 22 1.313 - 18 UNEF 1.450 (36.8) 24 25 24 1.438 - 18 UNEF 1.580 (40.1) TABLE II: Shell Size TABLE III: Clamp Size, Cable Range and Dimensions and Clamp Size Clamp Cable Range E F Shell Shell Size Min Max Max Max Clamp Size Dash Size Size Min Max No. 01 .062 (1.6) .125 (3.2) .781 (19.8) 1.250 (31.8) Series I Series II 02 .125 (3.2) .250 (6.4) .969 (24.6) 1.250 (31.8) 08 09 08 01 02 03 .250 (6.4) .375 (9.5) 1.062 (27.0) 1.250 (31.8) 10 11 10 01 03 04 .375 (9.5) .500 (12.7) 1.156 (29.4) 1.250 (31.8) 12 13 12 02 04 05 .500 (12.7) .625 (15.9) 1.250 (31.8) 1.312 (33.3) 14 15 14 02 05 06 .625 (15.9) .750 (19.1) 1.375 (34.9) 1.375 (34.9) 16 17 16 02 06 07 .750 (19.1) .875 (22.2) 1.500 (38.1) 1.500 (38.1) 18 19 18 03 07 08 .875 (22.2) 1.000 (25.4) 1.625 (41.3) 1.625 (41.3) 20 21 20 03 08 09 1.000 (25.4) 1.125 (28.6) 1.750 (44.5) 1.625 (41.3) 22 23 22 03 09 10 1.125 (28.6) 1.250 (31.8) 1.875 (47.6) 1.625 (41.3) 24 25 24 04 10 APPLICATION NOTES TABLE IV: Length Code 1. For complete dimensions see the applicable Military Length Available Length Specification. Code Shell Sizes 2. Metric dimensions (mm) are in Standard 08 - 24 1.500 (38.1) parentheses. A 08 - 24 2.500 (63.5) 3. Cable Range is defined as B 14 - 24 3.500 (88.9) the accommodation range C 20 - 24 4.500 (114.3) for the wire bundle or cable. Dimensions shown are not intended for inspection criteria. Dimensions in inches (millimeters) and are subject to change without notice. 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com B-37 E-Mail: sales glenair.com AS85049