AS85049/42 and MS3057D
Straight Non-Self-Locking Strain Relief
for Use with MS V Thread General Duty A End Bell
Basic
Part Number
Dash No.
M85049/42 - 10D W
Superseded Part Number
Material/Finish
B
N = Aluminum/Electroless Nickel
MS3057 -10D A
W = Aluminum/1,000 Hour Cadmium over Electroless Nickel
X = Aluminum/Nickel Fluorocarbon Polymer
Basic Part No.
Dash Metal and Finish Designator
Y = Aluminum/Pure Dense Electrodeposited Aluminum
No.
A = Aluminum Cadmium Olive Drab over Z = Aluminum/Zinc Nickel Black
Electroless Nickel
B = Stainless Steel/Cadmium Black
C = Aluminum, Cadmium Olive Drab
S = Stainless Steel/Passivated
N = Aluminum, Electroless Nickel
XS = Stainless Steel/Nickel Fluorocarbon Polymer
D = 300 Series Steel, Cadmium Black Plate
YS = Stainless SteelPure Dense Electrodeposited Aluminum
S = 300 Series Steel, Passivate
ZS = Stainless Steel/Zinc Nickel Black
G
E
Thread
Stainless Steel
Clamp Saddle
Configuration
Cable
F H
Entry
Telescoping Screws
TABLE I: Shell Size, Cable Entry and Backshell Dimensions
Dash E Thread F G H Cable Entry
No. Class 2B Max .020 (.5) .020 (.5) Max Min
4D 5/8 - 24 UNEF .937 (23.8) 1.281 (32.5) .937 (23.8) .312 (7.9) .125 (3.2)
6D 3/4 - 20 UNEF 1.031 (26.2) 1.281 (32.5) 1.125 (28.6) .437 (11.1) .250 (6.4)
8D 7/8 - 20 UNEF 1.250 (31.8) 1.281 (32.5) 1.312 (33.3) .562 (14.3) .312 (7.9)
10D 1 - 20 UNEF 1.250 (31.8) 1.281 (32.5) 1.312 (33.3) .625 (15.9) .350 (8.9)
12D 1 3/16 - 18 UNEF 1.437 (36.5) 1.312 (33.3) 1.531 (38.9) .750 (19.1) .500 (12.7)
16D 1 7/16 - 18 UNEF 1.688 (42.9) 1.406 (35.7) 1.750 (44.5) .937 (23.8) .625 (15.9)
20D 1 3/4 - 18 UNS 2.000 (50.8) 1.563 (39.7) 2.093 (53.2) 1.250 (31.8) .875 (22.2)
24D 2 - 18 UNS 2.250 (57.2) 1.625 (41.3) 2.343 (59.5) 1.375 (34.9) 1.000 (25.4)
28D 2 1/4 - 16 UN 2.500 (63.5) 1.900 (48.3) 2.750 (69.9) 1.625 (41.3) 1.250 (31.8)
32D 2 1/2 - 16 UN 2.750 (69.9) 1.900 (48.3) 3.000 (76.2) 1.875 (47.6) 1.437 (36.5)
APPLICATION NOTES
1. Assembly to be identified with manufacturers name and part number, space permitting.
2. Cable Entry is defined as the accommodation entry for the wire bundle or cable.
Dimensions are not intended for inspection criteria.
3. For complete dimensions, see the applicable Military Specification.
4. Metric dimensions (mm) are in parentheses.
Dimensions in inches (millimeters) and are subject to change without notice.
2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A.
GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com B-65 E-Mail: sales@glenair.com
AS85049