AS85049/42 and MS3057D Straight Non-Self-Locking Strain Relief for Use with MS V Thread General Duty A End Bell Basic Part Number Dash No. M85049/42 - 10D W Superseded Part Number Material/Finish B N = Aluminum/Electroless Nickel MS3057 -10D A W = Aluminum/1,000 Hour Cadmium over Electroless Nickel X = Aluminum/Nickel Fluorocarbon Polymer Basic Part No. Dash Metal and Finish Designator Y = Aluminum/Pure Dense Electrodeposited Aluminum No. A = Aluminum Cadmium Olive Drab over Z = Aluminum/Zinc Nickel Black Electroless Nickel B = Stainless Steel/Cadmium Black C = Aluminum, Cadmium Olive Drab S = Stainless Steel/Passivated N = Aluminum, Electroless Nickel XS = Stainless Steel/Nickel Fluorocarbon Polymer D = 300 Series Steel, Cadmium Black Plate YS = Stainless SteelPure Dense Electrodeposited Aluminum S = 300 Series Steel, Passivate ZS = Stainless Steel/Zinc Nickel Black G E Thread Stainless Steel Clamp Saddle Configuration Cable F H Entry Telescoping Screws TABLE I: Shell Size, Cable Entry and Backshell Dimensions Dash E Thread F G H Cable Entry No. Class 2B Max .020 (.5) .020 (.5) Max Min 4D 5/8 - 24 UNEF .937 (23.8) 1.281 (32.5) .937 (23.8) .312 (7.9) .125 (3.2) 6D 3/4 - 20 UNEF 1.031 (26.2) 1.281 (32.5) 1.125 (28.6) .437 (11.1) .250 (6.4) 8D 7/8 - 20 UNEF 1.250 (31.8) 1.281 (32.5) 1.312 (33.3) .562 (14.3) .312 (7.9) 10D 1 - 20 UNEF 1.250 (31.8) 1.281 (32.5) 1.312 (33.3) .625 (15.9) .350 (8.9) 12D 1 3/16 - 18 UNEF 1.437 (36.5) 1.312 (33.3) 1.531 (38.9) .750 (19.1) .500 (12.7) 16D 1 7/16 - 18 UNEF 1.688 (42.9) 1.406 (35.7) 1.750 (44.5) .937 (23.8) .625 (15.9) 20D 1 3/4 - 18 UNS 2.000 (50.8) 1.563 (39.7) 2.093 (53.2) 1.250 (31.8) .875 (22.2) 24D 2 - 18 UNS 2.250 (57.2) 1.625 (41.3) 2.343 (59.5) 1.375 (34.9) 1.000 (25.4) 28D 2 1/4 - 16 UN 2.500 (63.5) 1.900 (48.3) 2.750 (69.9) 1.625 (41.3) 1.250 (31.8) 32D 2 1/2 - 16 UN 2.750 (69.9) 1.900 (48.3) 3.000 (76.2) 1.875 (47.6) 1.437 (36.5) APPLICATION NOTES 1. Assembly to be identified with manufacturers name and part number, space permitting. 2. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 3. For complete dimensions, see the applicable Military Specification. 4. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com B-65 E-Mail: sales glenair.com AS85049