AS85049 AS85049/43 and MS3415 Strain Relief 45 Self-Locking or Non-Self-Locking CONNECTOR DESIGNATOR: Basic Part Number Dash No. AS5015 Series AS34001 Crimp, MIL-DTL-26482 Series II, A AS81703 Crimp Series III, MIL-DTL-83723 Series I & III M85049/43 S 10 W E A Thread Finish S = Self-Locking B A = Anodize, Black Use Dash for Non-Self-Locking N = Electroless Nickel N = Non-Detented W = 1,000 Hour Cadmium Olive Drab over Electroless Nickel X = Nickel Fluorocarbon Polymer Y = Pure Dense Electrodeposited C Aluminum Z = Zinc-Nickel, Black F Cable Entry TABLE I: Shell Size, Cable Entry and Backshell Dimensions Dash A Thread C E F Cable Entry No. Class 2B Max Closed Max Min Max 3* .562 - 24 UNEF .669 (17.0) 1.160 (29.5) .772 (19.6) .125 (3.2) .204 (5.2) 8 .500 - 20 UNF .885 (22.5) 1.650 (29.5) .772 (19.6) .125 (3.2) .204 (5.2) 10 .625 - 24 UNEF 1.010 (25.7)) 1.694 (30.6) .803 (20.4) .187 (4.7) .286 (7.3) 12 .750 - 20 UNEF 1.135 (28.8) 1.768 (32.5) .866 (22.0) .291 (7.4) .416 (10.6) 14 .875 - 20 UNEF 1.260 (32.0) 1.840 (33.5) .928 (23.6) .351 (8.9) .476 (12.1) 16 1.000 - 20 UNEF 1.385 (35.2) 1.916 (36.2) .991 (25.2) .501 (12.7) .625 (15.9) 18 1.062 - 18 UNEF 1.570 (39.9) 2.034 (39.2) 1.110 (28.2) .518 (13.2) .706 (17.9) 20 1.188 - 18 UNEF 1.635 (41.5) 2.078 (40.3) 1.172 (29.8) .581 (14.8) .831 (21.1) 22 1.313 - 18 UNEF 1.760 (44.7) 2.122 (41.5) 1.235 (31.4) .644 (16.4) .956 (24.3) 24 1.438 - 18 UNEF 1.885 (47.9) 2.166 (42.6) 1.297 (32.9) .706 (17.9) 1.081 (27.5) 28 1.750 - 18 UNS 2.135 (54.2) 2.461 (45.7) 1.543 (39.2) .750 (19.1) 1.187 (30.1) 32 2.000 - 18 UNS 2.315 (58.8) 2.549 (48.0) 1.668 (42.4) .875 (22.2) 1.250 (31.8) 36 2.250 - 16 UN 2.635 (66.9) 2.595 (49.1) 1.793 (45.5) .938 (23.8) 1.375 (34.9) 40 2.500 - 16 UN 2.885 (73.3) 2.599 (49.1) 1.918 (48.7) .938 (23.8) 1.500 (38.1) 44 2.750 - 16 UN 3.135 (79.6) 2.860 (55.9) 2.132 (54.2) 1.188 (30.2) 1.750 (44.5) 48 3.000 - 16 UN 3.385 (86.0) 2.918 (58.1) 2.257 (57.3) 1.312 (33.3) 1.875 (47.6) 61* 1.500 - 18 UNEF 1.653 (41.5) 1.676 (42.6) 1.204 (30.6) .706 (17.9) 1.081 (27.5) * See Note 5 APPLICATION NOTES 1. Assembly to be identified with manufacturers name and part number, space permitting. 2. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 3. For complete dimensions, see the applicable Military Specification. 4. Metric dimensions (mm) are in parentheses. 5. Non-Self-Locking only. Dimensions in inches (millimeters) and are subject to change without notice. 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com B-66 E-Mail: sales glenair.com