M85049/47W22 Glenair

AS85049 AS85049/47 and MS27507 90 Strain Relief Self-Locking or Non-Self-Locking Material and Finish Designator CONNECTOR DESIGNATOR: N = Aluminum, Electroless Nickel S = 300 Series Steel, Passivated MIL-DTL-38999 Series I and II F Basic W = Aluminum, 1000 Hour Cadmium Part Number Olive Drab over Electroless Nickel FOR NEW DESIGN M85049/47 S W 10 USE AS85049/123 B S = Self-Locking Dash No. Omit for Non-Self-Locking N = Non-Detented, Self-Locking Superseded Part Number MS27507-B 10 Basic Part No. Dash No. (Non-Self- Metal and Finish Designator Locking) A = Aluminum Cadmium Olive Drab over Electroless Nickel C = Aluminum, Cadmium Olive Drab N = Aluminum, Electroless Nickel D = 300 Series Steel, Cadmium Black Plate S = 300 Series Steel, Passivate F A Thread APPLICATION NOTES 1. Assembly to be identified with manufacturers name and part number, space permitting. E 2. Cable Entry is defined as the Self-Locking accommodation entry for the Only wire bundle or cable. 3. Dimensions are not intended for G inspection criteria. 4. For complete dimensions, see the applicable Military Specification. 5. Metric dimensions (mm) are in Cable parentheses. H Entry TABLE I: Shell Size, Cable Entry and Backshell Dimensions Cable Entry Dash Shell Size A Thread E F G H No. Ref. Class 2B Max Max Max Max Min Max 8 8/9 .438 - 28 UNEF .86 (21.8) 1.38 (35.1) 1.00 (25.4) .85 (21.6) (2.5) .234 (5.9) .098 10 10/11 .562 - 24 UNEF .98 (24.9) 1.38 (35.1) 1.10 (27.9) .90 (22.9) .153 (3.9) .234 (5.9) 12 12/13 .688 - 24 UNEF 1.16 (29.5) 1.46 (37.1) 1.10 (27.9) 1.10 (27.9) .190 (4.8) .328 (8.3) 14 14/15 .813 - 20 UNEF 1.28 (32.5) 1.63 (41.4) 1.25 (31.8) 1.15 (29.2) .260 (6.6) .457 (11.6) 16 16/17 .938 - 20 UNEF 1.41 (35.8) 1.80 (45.7) 1.30 (33.0) 1.30 (33.0) .283 (7.2) .614 (15.6) 18 18/19 1.063 - 18 UNEF 1.52 (38.6) 1.82 (46.2) 1.35 (34.3) 1.50 (38.1) .325 (8.3) .634 (16.1) 20 20/21 1.188 - 18 UNEF 1.64 (41.7) 1.90 (48.3) 1.60 (40.6) 1.60 (40.6) .343 (8.7) .698 (17.7) 22 22/23 1.313 - 18 UNEF 1.77 (45.0) 2.04 (51.8) 1.75 (44.5) 1.70 (43.2) .381 (9.7) .823 (20.9) 24 24/25 1.438 - 18 UNEF 1.89 (48.0) 2.15 (54.6) 1.85 (47.0) 1.80 (45.7) .418 (10.6) .853 (21.7) Dimensions in inches (millimeters) and are subject to change without notice. 2013 Glenair, Inc. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 10-23-14 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com B-70 E-Mail: sales glenair.comX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for Circular MIL Spec Strain Reliefs & Adapters category: Click to view products by Glenair manufacturer: Other Similar products are found below : 896227-000 899170S004 0113-023-000 6000-063-0022 CS6624-000 620AB038Z136 620AS001Z108 620AS038Z112 620AS038Z120 620AS038Z132 620FB038NF08 620HA038NF09 620HA038NF11 620HA038NF13 620HA038NF25 620HB049NF17 620HS038NF11 620HS038Z121 620HS042XM19 620HS042XM25 620HS048B17 620MS064NF12 620MS065Z107 620MS065ZNU06 627-123NF21-11 627-125NF23-6 630J041M06H 630J041M20H 637S010NF0212H 637S010NF0416A 640830-000 659943-000 66241-10A CW0597-000 CW0598-000 CW0948-000 CY0122-000 M85049/41-6A W/B M85049/42-12DS M85049/47N8 M85049/51-1-14S M85049/51S16S M85049/60-1N16 M85049/60-2G12W M85049/69-11N CZ3661-000 D02922-000 70.360.1628.0 703797-000 705825-000