AS85049 AS85049/49-2 and MS27506 Straight Strain Relief Self-Locking or Non-Self-Locking CONNECTOR DESIGNATOR: Basic Part Number Dash No. MIL-DTL-27599, F MIL-DTL-38999 Series I & II M85049/49-2 S 10 W FOR NEW DESIGN USE AS85049/121 S = Self-Locking Material and Finish Designator B Use Dash for Non-Self-Locking A = Aluminum, Black Anodize N = Non-Detented N = Aluminum, Electroless Nickel S = 300 Series Steel, Passivated W = Aluminum, 1000 Hour Cadmium Olive Drab over Electroless Nickel Cable F A Thread Entry Self-Locking Only Note: Screw orientation shown is for non-self-locking E configuration. Screws H Self-Locking Only on self-locking configurations are on the same side/face of the clamp. TABLE I: Shell Size, Cable Entry and Backshell Dimensions Cable Entry Shell Shell Size A Thread E Max F Max H Size Ref. Class 2B Self-Locking Only Self-Locking Only Max Min Max 8 8/9 .438 - 28 UNEF .86 (21.8) .91 (23.1) .85 (21.6) .098 (2.5) .234 (5.9) 10 10/11 .562 - 24 UNEF .98 (24.9) .91 (23.1) .90 (22.9) .153 (3.9) .234 (5.9) 12 12/13 .688 - 24 UNEF 1.16 (29.5) 1.01 (25.7) 1.10 (27.9) .190 (4.8) .328 (8.3) 14 14/15 .813 - 20 UNEF 1.28 (32.5) 1.06 (26.9) 1.15 (29.2) .260 (6.6) .457 (11.6) 16 16/17 .938 - 20 UNEF 1.41 (35.8) 1.16 (29.5) 1.30 (33.0) .283 (7.2) .614 (15.6) 18 18/19 1.063 - 18 UNEF 1.52 (38.6) 1.41 (35.8) 1.50 (38.1) .325 (8.3) .634 (16.1) 20 20/21 1.188 - 18 UNEF 1.64 (41.7) 1.51 (38.4) 1.60 (40.6) .343 (8.7) .698 (17.7) 22 22/23 1.313 - 18 UNEF 1.77 (45.0) 1.66 (42.2) 1.70 (43.2) .381 (9.7) .823 (20.9) 24 24/25 1.438 - 18 UNEF 1.89 (48.0) 1.76 (44.7) 1.80 (45.7) .418 (10.6) .853 (21.7) APPLICATION NOTES 1. Assembly to be identified with manufacturers name and part number, space permitting. 2. Cable Entry is defined as the accommodation entry for the wire bundle or cable. Dimensions are not intended for inspection criteria. 3. For complete dimensions, see the applicable Military Specification. 4. Metric dimensions (mm) are in parentheses. Dimensions in inches (millimeters) and are subject to change without notice. 2013 Glenair, Inc. U.S. CAGE Code 06324 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com B-74 E-Mail: sales glenair.comX-ON Electronics Largest Supplier of Electrical and Electronic Components Click to view similar products for D-Sub Backshells category: Click to view products by Glenair manufacturer: Other Similar products are found below : 173114-0084 173112-1658 600X51137X 600X54009X 66241-12A M85049/48-1-2 M85049/48-3-5F M85049/6-38N M85049/86-12N03 70.350.0636.4 70.350.2435.1 72.350.1035.2 72.352.2435.1 73.359.4035.3 799-015TMH07M 799-015TMH08N FKH1RE 829472-1 F- PHG-1E F-PHG-3E F-PHG-4E F-PHR-4E PCS-E20W 8655MHRA0901KLF 8655MHRA2501KLF 958-009-010R011 970-015-040R011 970-025-030R121 970-025-040R011 971-009-030R121 971-009-040R011 971-015-040R011 971-025-040R011 GS85049/38-25M 975T009- 020R121 975T015-020R121 1-21986-2 1-21986-5 DB-20962 DE-C8-J9-F4-1R DE-C8-J9-F5-1R DPH-B-003 1437013-9 1484402-8 MS3057-10A 156-3025-EX MS3417-16C 16-500800 165X02659X 165X03329A