AS85049 AS85049/51 and MS3418 90 Strain Relief Self-Locking or Non-Self-Locking Basic CONNECTOR DESIGNATOR: Part Number Dash No. AS50151 Series AS34001 Crimp, MIL-DTL-26482 Series II, A SAE-AS1703 Crimp Series III, FOR NEW DESIGN MIL-DTL-83723 Series I & III M85049/51 S 10 W USE AS85049/120 Superseded Part Number S = Self-Locking Material and Finish Designator B -1 = Non-Self-Locking A = Aluminum, Black Anodize MS3418-10 C N = Aluminum, Electroless Nickel N = Non-Detented S = Stainless Steel, Passivate Metal and Finish Designator Dash Basic W = Aluminum, 1000 Hr. Cadmium O.D. A = Aluminum 1000 Hour Cadmium Olive No. Part No. over Electroless Nickel Drab over Electroless Nickel (Non-Self- C = Aluminum, Cadmium Olive Drab Locking) G = Aluminim Black Anodize N = Aluminum, Electroless Nickel APPLICATION NOTES 1. Assembly to be identified with F A Thread manufacturers name and part Self Locking number, space permitting. Only 2. Cable Entry is defined as the accommodation entry for the E wire bundle or cable. Self Locking 3. Dimensions are not intended for Only inspection criteria. 4. For complete dimensions, see the G applicable Military Specification. 5. Metric dimensions (mm) are in parentheses. Cable H Entry TABLE I: Shell Size, Cable Entry and Backshell Dimensions Dash A Thread E Max F Max G H Cable Entry No. Class 2B Self-Locking Self-Locking .062 (1.6) Max Min Max 3*+ .562 - 24 UNEF - - - - .777 (19.7) .782 (19.9) .125 (3.2) .204 (5.2) 8 .500 - 20 UNF .885 (22.5) 1.257 (31.9) .746 (18.9) .782 (19.9) .125 (3.2) .204 (5.2) 10 .625 - 24 UNEF 1.010 (25.7) 1.339 (34.0) .805 (20.4) .862 (21.9) .187 (4.7) .286 (7.3) 12 .750 - 20 UNEF 1.135 (28.8) 1.532 (38.9) .867 (22.0) 1.003 (25.5) .291 (7.4) .416 (10.6) 14 .875 - 20 UNEF 1.260 (32.0) 1.592 (40.4) .930 (23.6) 1.061 (26.9) .351 (8.9) .476 (12.1) 16 1.000 - 20 UNEF 1.385 (35.2) 1.741 (44.2) .994 (25.2) 1.334 (33.9) .501 (12.7) .626 (15.9) 18 1.062 - 18 UNEF 1.510 (38.4) 1.853 (47.1) 1.171 (29.7) 1.466 (37.2) .518 (13.2) .706 (17.9) 20 1.188 - 18 UNEF 1.635 (41.5) 1.978 (50.2) 1.234 (31.2) 1.572 (39.9) 581 (14.8) .831 (21.1) 22 1.313 - 18 UNEF 1.760 (44.7) 2.108 (53.5) 1.296 (32.9) 1.688 (42.9) .644 (16.4) .956 (24.3) 24 1.438 - 18 UNEF 1.885 (47.9) 2.228 (56.6) 1.358 (34.5) 1.790 (45.5) .706 (17.9) 1.081 (27.5) 28+ 1.750 - 18 UNS 2.135 (54.2) 2.528 (64.2) 1.572 (39.9) 2.035 (51.7) .750 (19.1) 1.187 (30.1) 32+ 2.000 - 18 UNS 2.395 (60.8) 2.591 (65.8) 1.797 (45.6) 2.386 (60.6) .875 (22.2) 1.250 (31.8) 36+ 2.250 - 16 UN 2.635 (66.9) 2.716 (69.0) 1.922 (48.8) 2.496 (63.4) .938 (23.8) 1.375 (34.9) 40+ 2.500 - 16 UN 2.885 (73.3) 2.841 (72.2) 2.047 (52.0) 2.566 (65.2) .938 (23.8) 1.500 (38.1) 44+ 2.750 - 16 UN 3.135 (79.6) 3.091 (78.5) 2.296 (58.3) 2.860 (72.6) 1.188 (30.2) 1.750 (44.5) 48+ 3.000 - 16 UN 3.385 (86.0) 3.216 (81.7) 2.421 (61.5) 3.344 (84.9) 1.312 (33.3) 1.875 (47.6) 61*+ 1.500 - 18 UNEF - - - - 1.388 (35.3) 1.775 (45.1) .706 (17.9) 1.081 (27.5) * Not Available in Self Locking + Not Available under M83723/15A Dimensions in inches (millimeters) and are subject to change without notice. 2013 Glenair, Inc. Mil-Spec Backshells U.S. CAGE Code 06324 Rev. 04.28.16 Printed in U.S.A. GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912 www.glenair.com B-76 E-Mail: sales glenair.com