Connector
Accessories
TG70
Connector Strap Wrench
With 3/8 Square Drive
6.500 (165.1) Approx
3/8 Square Drive,
3/8 (9.5) Square Drive for
For Torque Wrench 600-004
Torque Wrench 600-004
3.000 (76.2) Dia. Max
with 18-Inch Single Strap
3.000 (76.2) Dia. Max.
See Note 2
3.000 (76.2) Dia. Max. with 18 Inch Single Strap
2.000 Dia. (50.8) Max.
2.000 Dia. (50.8) Max. with 12 Inch Single Strap
with 12-Inch Single Strap
See Notes 2, 4 and 5
Basic
Torque Wrench APPLICATION NOTES
Part
Number (Omit for None)
1. These wrenches are made of the following materials:
Wrench Handle - Aluminum Alloy/Nickel Plate.
Wedge - Stainless Steel/Passivated.
Strap - Impregnated Fabric. Straps are 1/2 inch (12.7) in width.
TG70 - 1 - 18
2. Replacement straps are available. Specify part number G70515-xx for 12,
18, 24 or 36-inch strap. 24 and 36 inch for double wrap.
3. Metric dimensions (mm) are indicated in parentheses.
Strap Length in Inches (See Notes2 and 4)
4. Double wrap as shown for heavy duty range.
Lengths Available: 12, 18, 24 and 36-Inch Only
5. Not recommended for composite coupling nuts (use 600-091 or 600-157).
Standard length is 12 Inches,
Omit Dash Number for Standard
VARIANCE CHART NOTES
VARIANCE CHART
1. Recommended installation
torque is approximately 80% of
TG-70 Strap Wrench Used with Glenair Torque Wrenches
MIL-C-85049 accessory thread
Recommended Installation Torque
strength values.
Light/Medium Duty Heavy Duty 2. Heavy duty installation torque
values may be difficult to attain
Accessory 5 Inch Pounds 5 Inch Pounds
with the TG70 Strap Wrench;
Shell Size TG70 Torque Part Torque TG70 Torque Part Torque
the values shown in brackets [ ]
08/09 28 35 45 60 are the maximum attainable with
the TG70 Strap Wrench using a
10/11 28 35 70 80
single wrap.
12/13 30 40 75 110 [80]
3. Glenair recommends using 600
14/15 30 40 75 120 [80]
series torque tools whenever
16/17 30 40 75 120 [80] possible. When torque loading
exceeds 75 inch pounds, or to
18/19 30 40 75 120 [80]
attain the heavy duty torque
20/21 75 80 95 140 [100]
values shown, a double wrap
H
22/23 75 80 120* 140 strap provides suitable friction to
achieve torque values.
24/25 75 80 120* 140
4. Glenair recomends that heavy
28 135* 150
duty torque values be directly
32 150* 150
read through the connector shell
body with the use of 600-005
36 150* 150
connectors holding tools.
* TG70 Not Recommended For Values of 120 Inch Lbs. or Greater.
2010 Glenair, Inc. CAGE CODE 06324 Printed in U.S.A.
GLENAIR, INC. 1211 AIR WAY GLENDALE, CA 91201-2497 818-247-6000 FAX 818-500-9912
www.glenair.com E-Mail: sales@glenair.com
H-50
GLENAI R I NC. TG70X-ON Electronics
Largest Supplier of Electrical and Electronic Components
Click to view similar products for Wrenches category:
Click to view products by Glenair manufacturer:
Other Similar products are found below :
74005 74008 G70515-24 DCH.91.101.PN 1406504-3 1406504-4 DCA.91.231.7TN 1055265-1 1055267-1 1-1406504-0 TA-0432 600-006-
12 600-008-01 600-141-6P 600-146-02 TG70-24 TG82 1055787-1 DCH.91.251.PA TG70-18 600-146-16 600-146-03 600-078-01
1406504-1 TG70 1061789-1 G62748-11 DPH.99.005.2K DCP.91.045.TN 1055512-1 1055276-1 R282303020 TA-0456 DCA.91.149.0TN
TA-0436 TA-0398 TOL-222901 64W022-001 294GB-5069-17-N C2777-JT-JB5-1 523200-4 74_Z-0-0-663 294GB-5070-25-A 74_Z-0-0-
79 294GB-5070-17-A TOL-171801 80117 DCN.91.149.0TK MF10-T1 R282202000