500/350/250/150MHz DIGITAL STORAGE OSCILLOSCOPE GDS-3000 Series FEATURES 500/350/250/150MHz Bandwidth Dual Sampling Modes: 5GSa/s Real-Time Sampling Rate and 100GSa/s Equivalent Time Sampling Rate 25k Points Memory for Each Input Channel VPO (Visual Persistence Oscilloscope) Technology to Display Less-Frequently- Occurred Signals 8 800 x 600 High Resolution TFT LCD Display Unique Split Screen System with Independent Setting for Each Input Channel The GDS-3000 Series digital storage oscilloscope is a full-featured and powerful tool that allows Three Input Impedance Selections: you to tackle complex measurement issues with ease. 50/75 /1M The GDS-3000 Series, carrying a maximum bandwidth of 500MHz, is equipped with a real-time Optional Power Measurement Software for sampling rate up to 5GSa/s and an equivalent-time sampling rate of 100GSa/s. The large 8-inch Power Supply Measurement and Analysis SVGA TFT LCD screen, combined with the advanced digital signal processing technologyVPO, provides meticulous detail and clarity for the displayed waveforms. The GDS-3000 Series gives you Optional Serial BUS Triggering and Decoding confidence not to miss any part of the test signal in the product verification and debugging stages 2 Software Supporting I C, SPI and UART and allows you to speed up your task without hesitation. Support GW APP Software-Easy Upgrade of Rich Features Feature New Function With widespread applications of embedded system using serial bus communications, resolving unexpected issues, such as propagation delay and bus contention, is often a challenge to design and testing engineers. The GDS-3000 Series provides (optional) design and testing engineers with powerful tools for the communication analysis and debugging of the most popular serial interface projects including I C ,SPI and UART. To fulfill the increasing power measurement demands, as a green energy trend, GDS-3000 provides an embedded power-measurement software (optional), which includes measurements of Power Quality, Harmonics, Ripple and Inrush Current, meeting requirements of most power measurement standards. Front Hi-tech Platform With 5GSa/s sampling and Visual Persistence Oscilloscope (VPO) technology, GDS-3000 displays waveforms truthfully and captures less-frequently-occurred signals, like glitches or runts, simultaneously without missing any spot of waveform information. A unique Split-screen feature allows each input channel to be operated independently with respective setting and waveform display. This gives users flexibility to use GDS-3000 Series as a multi-scope-in-one DSO. To alleviate the burden of manual operation and to reduce human error, additional features such as auto range are used to automatically adjust the horizontal and vertical scale of a displayed signal so that waveforms are displayed with the best possible viewing ratio. Rear Panel The I/O Interfaces give you a good range of choices and convenience. In the front panel, a USB host port is used for easy data access. And in the rear panel, another USB port can be used for APPLICATIONS remote control or for screen printout directly from PictBridge compatible printers. In addition, RS-232 and LAN interfaces provide the flexibility supporting broad range of applications. The Industrial and Educational R&D Labs SVGA video output port allows you to display the screen on an external projector or monitor for information sharing and discussion. Product Testing and Quality Assurance Unique Signal Processing -VPO Power Supply and Serial BUS Design The GDS-3000 VPO (Visual Persistence Oscilloscope) technology adopts a very unique signal- System Integration & Debugging processing design. To significantly increase the data processing speed and the waveform capture rate, GDS-3000 uses FPGA platform to replace conventional serial microprocessor architecture. Maintenance & Repair Service This unique technology allows the GDS-3000 Series to show waveforms in a fashion like that of an analog oscilloscope. The VPO three dimension waveform display, containing the information of amplitude, time and intensity, provides more useful signal contents for the analysis of rapid- changed events, such as video, jitter and infrequent signals. Simply Reliable GDS-3000 SeriesSPECIFICATIONS GDS-3152 GDS-3154 GDS-3252 GDS-3254 GDS-3352 GDS-3354 GDS-3502 GDS-3504 VERTICAL Channels 2Ch+EXT 4Ch+EXT 2Ch+EXT 4Ch+EXT 2Ch+EXT 4Ch+EXT 2Ch+EXT 4Ch+EXT Bandwidth DC~150MHz(-3dB) DC~250MHz(-3dB) DC~350MHz(-3dB) DC~500MHz(-3dB) Rise Time 2.3ns 1.4ns 1ns 700ps Bandwidth Limit 20MHz 20M/100MHz 20M/100M/200MHz 20M/100M/200/350MHz The bandwidth of the 75 input impedance is limited to 150MHz only Vertical Resolution 8 bits Vertical Resolution(1M) 2mV~5V/div Vertical Resolution(50/75) 2mV~1V/div Input Coupling AC, DC, GND Input Impedance 1M// 15pF approx. DC Gain Accuracy (3% X Readout + 0.1div + 1mV) Polarity Normal , Invert Maximum Input Voltage(1M) 300V (DC+AC Peak), CAT I Maximum Input Voltage(50/75) 5 Vrms , CAT I Offset Position Range 2mV/div ~ 100mV/div : 0.5V 200mV/div ~ 5V/div : 25V Waveform Signal Add, Subtract, Multiply, and Divide waveforms, FFT, FFTrms FFT : Spectral magnitude. Set FFT vertical scale to Process Linear RMS or dBV RMS, and FFT window to Rectangular, Hamming, Hanning or Blackman-Harris. Source 2CH model: CH1, CH2, Line , EXT 4CH model: CH1 , CH2 , CH3 , CH4 , Line , EXT TRIGGER Trigger Mode Auto (Supports Roll Mode for 100 ms/div and slower), Normal, Single Trigger Type Edge, Pulse Width, Video, Runt, Rise & Fall, Alternate, Event-Delay(1~65,535 events), Time-Delay(10ns~10s), I C, SPI, UART(optional) Trigger Holdoff Range 10ns ~ 10s Coupling AC, DC, LF rej. , Hf rej. , Noise rej. Sensitivity DC~30MHz Approx. 1div or 10mV 50MHz~150MHz Approx. 1.5div or 15mV 150MHz~350MHz Approx. 2div or 20mV 350MHz~500MHz Approx. 2.5div or 25mV Range 15V EXT TRIGGER Sensitivity DC ~ 150MHz Approx. 100mV 150MHz ~ 250MHz Approx. 150mV 250MHz ~ 350MHz Approx. 150mV 350MHz~500MHz Approx. 200mV Input Impedance 1M 3%, ~16pF Range 1ns/div ~ 100s/div (1-2-5 increments GDS-3502/3504 1-2.5-5 increments)ROLL : 100ms/div ~ 100s/div HORIZONTAL Pre-trigger 10 div maximum Post-trigger 1,000 div max ( depend on time base ) Accuracy > 20 ppm over any 1 ms time interval X-Axis Input/Y-Axis Input Channel 1 Channel 3/Channel 2 Channel 4 X-Y MODE Phase Shift 3 at 100kHz SIGNAL ACQUISITION Real Time Sample Rate 2.5GSa/s 5GSa/s 2.5GSa/s 5GSa/s 5GSa/s 5GSa/s 4GSa/s 4GSa/s ET Sample Rate 100GSa/s maximum for all models Record Length 25k points Acquisition Mode Normal, Average, Peak detect, High resolution, Single Average: 2 ~ 256 waveforms Peak detect: 2ns CURSORS AND Cursors Amplitude, Time, Gating available Automatic 28 sets: Vpp , Vamp , Vavg , Vrms , Vhi , Vlo , Vmax , Vmin , Rise Preshoot/ Overshoot , Fall Preshoot/Overshoot, MEASUREMENT Measurement Freq , Period , Rise time , Fall time , Positive width , Negative width , Duty cycle, Phase, and eight different delay measurements (FRR, FRF, FFR, FFF, LRR, LRF, LFR, LFF) Cursors measurement Voltage difference between cursors ( V) Time difference between cursors ( T) 6 digits, range from 2Hz minimum to the rated bandwidth Auto counter POWER Power Quality VRMS, VCrest factor, Frequency, IRMS, ICrest factor, True power, Apparent power, Reactive power, Power factor, Phase angle. MEASUREMENTS Measurements Harmonics Freq, Mag, Mag rms, Phase, THD-F, THD-R, RMS (OPTION) Ripple Measurements Vripple ,Iripple In-rush current First peak, second peak Autoset Single-button, automatic setup of all channels for vertical, horizontal and trigger systems, with undo autoset CONTROL PANEL Auto-Range Allow automatically adjusts the time base and/or the vertical scale of displayed waveform when the frequency and/or the amplitude of FUNCTION input signal changed. Save Setup 20set Save Waveform 24set DISPLAY SYSTEM TFT LCD Type 8 TFT LCD SVGA color display(LED Back-light) Display Resolution 800 horizontal x 600 vertical pixels (SVGA) Interpolation Sin(x)/x & Equivalent time sampling Waveform Display Dots, Vectors, Variable persistence, Infinite persistence Display Graticule 8 x 10 divisions Display Brightness Adjustable RS-232C INTERFACE DB-9 male connector USB Port 2 sets USB 2.0 high-speed host port 1 set USB high-speed 2.0 device port Ethernet Port RJ-45 connector, 10/100Mbps SVGA Video Port DB-15 female connector, monitor output for display on SVGA monitors GPIB GPIB-to-USB Adapter (Optional) Go/NoGo BNC 5V Max/10mA TTL open collector output Internal Flash Disk 64MB Kensington Style Lock Rear-panel security slot connects to standard Kensington-style lock Line Output 3.5mm stereo jack for Go/NoGo audio alarm Line Voltage Range AC 100V ~ 240V, 48Hz ~ 63Hz, auto selection POWER SOURCE MISCELLANEOUS Multi-Language Menu Available On-Line Help Available Time clock Time and date, provide the date/time for saved data DIMENSIONS & WEIGHT 400(W) X 200(H) X 130(D)mm, Approx. 4 kg Specifications subject to change without notice. DS-3000GD2DH * Three-year warranty, excluding probes & LCD display panel. OPTION ORDERING INFORMATION DS3-PWR Power analysis software: Power quality/Harmonic/Ripple/In-rush current measurements GDS-3502 500MHz, 2-Channel, Visual Persistence DSO DS3-SBD Serial Bus analysis software: I C/SPI/UART (only 4-channel models support SPI function) GDS-3504 500MHz, 4-Channel, Visual Persistence DSO GUG-001 GPIB to USB adapter GDS-3352 350MHz, 2-Channel, Visual Persistence DSO OPTIONAL ACCESSORIES GDS-3354 350MHz, 4-Channel, Visual Persistence DSO GTP-033A 35MHz 1:1 Passive probe GDP-025 25MHz High voltage differential probe GDS-3252 250MHz, 2-Channel, Visual Persistence DSO GTP-352R 350MHz 20:1 Passive probe GDP-050 50MHz High voltage differential probe GDS-3254 250MHz, 4-Channel, Visual Persistence DSO GTC-001 Instrument cart 450(W)x430(D)mm(120V input socket) GDP-100 100MHz High voltage differential probe GTC-002 Instrument cart 330(W)x430(D)mm(120V input scoket) GDS-3152 150MHz, 2-Channel, Visual Persistence DSO GCP-005 1kHz/5A Current probe GSC-008 Soft Carrying Case GDS-3154 150MHz, 4-Channel, Visual Persistence DSO GCP-020 10kHz/200A Current probe GTL-110 Test lead, BNC to BNC connector GCP-100 100kHz/100A Current probe GTL-232 RS-232C cable, 9-pin female to 9-pin female, ACCESSORIES Null Modem for computer GCP-530 50MHz/30A Current probe GTL-246 USB 2.0 cable, A-B type cable 4P, 1800mm User manual x 1 ,Power cord x 1 GCP-1030 100MHz/30A Current probe GRA-411 Rack Adapter Panel GCP-206P Power supply for current probe(2 input channel) GTP-151R : 150MHz 10:1 passive probe for GDS-3152/3154 (one per channel) GDB-03 Oscilloscope Education and Training Kit GCP-425P Power supply for current probe(4 input channel) GTP-251R : 250MHz 10:1 passive probe for GDS-3252/3254 (one per channel) GKT-100 Deskew fixture GTP-351R : 350MHz 10:1 passive probe for GDS-3352/3354 (one per channel) FREE DOWNLOAD GTP-501R : 500MHz 10:1 passive probe for GDS-3502/35054 (one per channel) PC Software FreeWave software Driver USB driver LabView driver Global Headquarters U.S.A. Subsidiary GOOD WILL INSTRUMENT CO., LTD. INSTEK AMERICA CORP. No.7-1, Jhongsing Road, Tucheng Dist., New Taipei City 236, Taiwan 3661 Walnut Avenue Chino, CA 91710, U.S.A. TF+886-2-2268-0389 +886-2-2268-0639 TF+1-909-5918358 +1-909-5912280 E-mail: marketing goodwill.com.tw E-mail: sales instekamerica.com China Subsidiary Japan Subsidiary GOOD WILL INSTRUMENT (SUHZOU) CO., LTD. INSTEK JAPAN CORPORATION NO. 69, Lushan Road, Snd, Suzhou Jiangsu 215011 China 4F, Prosper Bldg, 1-3-3 Iwamoto-Cho Chiyoda-Ku, TF+86-512-6661-7177 +86-512-6661-7277 Tokyo 101-0032 Japan TF+81-3-5823-5656 +81-3-5823-5655 E-mail: marketing instek.com.cn E-mail: info instek.co.jp Malaysia Subsidiary Korea Subsidiary Simply Reliable GOOD WILL INSTRUMENT (M) SDN. BHD. GOOD WILL INSTRUMENT KOREA CO., LTD. 27, Persiaran Mahsuri 1/1, Sunway Tunas, Room No.805, Ace Hightech-City B/D 1Dong, 11900 Bayan Lepas, Penang, Malaysia Mullae-Dong 3Ga 55-20, Yeongduengpo-Gu, Seoul, Korea www.gwinstek.com TF+604-6309988 +604-6309989 T +82-2-3439-2205 F +82-2-3439-2207 E-mail: sales goodwill.com.my E-mail : gwinstek gwinstek.co.kr