SPECIFICATIONS 10MHz / 5MHz / 1MHz PRECISION LCR METER TEST FREQUENCY 20Hz ~ 1MHz/5MHz/10MHz, 5 Digits, 0.005% INPUT IMPEDANCE 100 BASIC ACCURACY 0.1% (R, Z, X, G, Y, B, L, C) LCR-8000G Series TEST SPEED DC AC (>2kHz) MAX: 75mS MAX: 30mS FAST: 150mS FAST: 60mS FEATURES MEDIUM: 450mS MEDIUM: 120mS SLOW: 600mS SLOW: 900mS Wide Test Frequency 20Hz~10/5/1MHz TEST SIGNAL LEVELS Test Frequency Test Signal Level (rms) Step Accuracy 3MHz 10mV ~ 2V 1mV/10mV 2% 5mV 0.1% Basic Accuracy & 6 Digits > 3MHz 10mV ~ 1V 1mV/10mV 2% 5mV Measurement Resolution SHORT CIRCUIT CURRENT Max. 20mA Large LCD Display with Intuitive User MEASUREMENT RANGES Mode Measure Range R, Z, X, Rdc 0.1m ~ 100M Interface G, Y, B 10nS ~ 1000S Full Measuring Functions with DUT V/I L 0.1nH ~ 100kH C 0.01pF ~ 1F Monitor D 0.00001 ~ 9.9999 Q 0.1 ~ 9999.9 PASS/FAIL Function ( abs , % , ) -180 ~ +180 The Smarter Way to Characterize Components with Judgment Alarm MEASUREMENT PARAMETERS Impedance (Z), Phase Angle ( ), Inductance (L), Capacitance (C), AC Resistance (Rac), Quality Factor (Q), The LCR-8000G Series LCR meter, with test frequency up to 10MHz, provides accuracy, versatility and high Dissipation Factor (D), Admittance (Y), Conductance (G), Reactance (X), Susceptance (B), DC Resistance (Rdc) Average 1 ~ 256 Times resolution for a wide range of component measurements, even including DC resistance measurement and Voltage/Current monitoring. The Multi-Step function allows on-screen programming of customized C + R, C + D, C + Q, L + R, L + Q, L + D SERIES OR PARALLEL EQUIVALENT CIRCUIT DC Resistance Measurement measurement sequence with Pass/Fail indication. Each program includes 30 test steps and each test step can be SERIES EQUIVALENT CIRCUIT ONLY X + R, X + D, X + Q set with selected parameters and test limits. Under Multi-Step operation, a tedious work routine can be done Multi Step Mode PARALLEL EQUIVALENT CIRCUIT ONLY C + G, B + G, B + D, B + Q, B + R, L + G step by step automatically just at a press of a button. With Graph Mode, LCR-8110G, LCR-8105G and LCR-8101G Graph Mode display the component impedance response either over a wide range of test frequency sweep or over a wide POLAR FORM Z + Phase Angle, Y + Phase Angle range of test voltage sweep in a graph chart. This gives an analysis result of either impedance vs. frequency or Standard RS-232C / GPIB Interface AVERAGE 1 ~ 256 times impedance vs. applied voltage all at a glance. GPIB and RS-232C interfaces are available as standard for 320 x 240 DOT-MATRIX LCD DISPLAY instrument control and test result display on the PC. The rich features of LCR-8000G Series easily make your INTERFACE RS-232C, GPIB measurement tasks done at a very competitive price. POWER SOURCE AC 115V (+10%/-25%), AC 230V (+15% / -14%)(Selectable), 50/60Hz Wide Frequency Range With Friendly Graph Mode DIMENSIONS & WEIGHT 330(W) x 170(H) x 340(D)mm, Approx. 5kg Intuitive User Interface The graph function shows the component Specifications subject to change without notice. CR-8000GGD1DH characteristics in visual manner. Either voltage sweep The LCR-8000G Series is designed to perform precision STANDARD ACCESSORIES ORDERING INFORMATION or frequency sweep can be selected for horizontal impedance measurements over a wide frequency range scale. Just select the parameter, and set the start/stop User manual x 1 LCR-8110G 10 MHz Precision LCR Meter C. of 20Hz ~ 10MHz for LCR-8110G, 20Hz ~ 5MHz for voltage or the start/stop frequency of the sweep, LCR Power cord x 1 LCR-8105G 5 MHz Precision LCR Meter LCR-8105G and 20Hz ~1MHz for LCR-8101G. The -8000G will run through the sequence of LCR-8101G 1 MHz Precision LCR Meter Test lead LCR-12 x 1 instrument is capable of measuring 11 different measurements and show the results on a graph. parameters with 0.1% basic accuracy, which meets the This graphical parameter measurement performs the OPTIONAL ACCESSORIES SELECTION GUIDE characteristic verification of components and precision measurement requirements of components materials over the response to the changes in AC test Accessory Model and modules used in the RF circuits. The large LCD Brief Description LCR-8110G LCR-8105G LCR-8101G frequency or AC test voltage without the need of display with single-layer operation menu of LCR-8000G Test Fixture for axial & radial lead components LCR-05 complex programming of an external controller. When Series provides users with ultimate convenience to Test Lead with Kelvin clip (4 wire type) LCR-06A the graph gets out of the vertical range, the LCR- plug and play without much learning time. 8000G Series can automatically adjust the scale to Test Lead with Alligator clip (2 wire type) LCR-07 get full test information. On the graph the marker LCR-08 Test Fixture (Tweezers) for SMD/Chip components operation is available for detailed observation. Test Fixture for SMD/Chip components LCR-09 LCR-12 Test Lead with Kelvin clip (4 wire type) Multi Step Mode Pass/fail Function With Judgment Alarm LCR-13 Test Fixture for SMD/Chip components The Multi-Step mode is capable of running a series of In the Pass/Fail test, primary parameter measurement GTL-232 RS-232C Cable APPLICATIONS result is compared with user-defined limits and the measurements of a component at a number of user- GRA-404 Rack Adapter Panel (19 , 4U) pass or fail result is then displayed. Three methods, defined steps in sequence automatically. Total 64 Note means the accessories work with a frequency limitation (under 1MHz) including absolute limit, percentage and delta limit, programs can be saved into the non-volatile memory, are available for Hi(high) and Lo(low) limit setting Education Lab and Training Institution and each program contains up to 30 test steps. The LCR-05 LCR-06A LCR-07 LCR-08 LCR-09 LCR-13 LCR-12 based on the nominal test value. The Pass/Fail test parameter and Hi/Lo limits can be set respectively for checks whether the parameter measurement result Research & Design each test step. After a program being properly edited, sits within the limits, then displayPAS for within the instrument can run through all the measurement the limits, orL for lower than the low limit, or steps either at a press of the button under the Manual Quality Assurance VerificationH For higher than the high limit. A scale and bar Trigger selection, or automatically run the program by for displaying measurement result is shown at the detecting the connection of a DUT under the Auto center of the screen to give a graphical identification, Global Headquarters U.S.A. Subsidiary which greatly reduces operator s load in a long time Trigger selection. When all the test steps are GOOD WILL INSTRUMENT CO., LTD. INSTEK AMERICA CORP. inspection work. This scale and bar also facilitate the No. 7-1, Jhongsing Road, Tucheng City, Taipei County 236, Taiwan 3661 Walnut Avenue Chino, CA 91710, U.S.A. completed, the screen shows the measurement T +886-2-2268-0389 F +886-2-2268-0639 T +1-909-5918358 F +1-909-5912280 adjustment of the variable components. Either Pass reading of the parameter being selected for each step E-mail: marketing goodwill.com.tw E-mail: sales instekamerica.com or Fail result can be set with a buzzer alarm, which with Pass, HI, or LO measurement result. China Subsidiary Japan Subsidiary makes component or material sorting easy with Made to Measure Since 1975 sound identification. GOOD WILL INSTRUMENT (SUHZOU) CO., LTD. INSTEK JAPAN CORPORATION NO. 69, Lushan Road, Snd, Suzhou Jiangsu 215011 China 4F, Prosper Bldg, 1-3-3 Iwamoto-Cho Chiyoda-Ku, www.gwinstek.com Tokyo 101-0032 Japan T +86-512-6661-7177 F +86-512-6661-7277 E-mail: marketing instek.com.cn T +81-3-5823-5656 F +81-3-5823-5655 E-mail: info instek.co.jp Malaysia Subsidiary Korea Subsidiary Simply Reliable GOOD WILL INSTRUMENT (M) SDN. BHD. GOOD WILL INSTRUMENT KOREA CO., LTD. Our low TCO helps you control costs 27, Persiaran Mahsuri 1/1, Sunway Tunas, Room No.805, Ace Hightech-City B/D 1Dong, with reliable products and services. C. 11900 Bayan Lepas, Penang, Malaysia Mullae-Dong 3Ga 55-20, Yeongduengpo-Gu, Seoul, Korea LCR-8000G Series Made to Measure Since 1975 T +604-6309988 F +604-6309989 T +82 2 3439 2205 F +82 2 3439 2207 E-mail: sales goodwill.com.my E-mail : gwinstek gwinstek.co.kr SPECIFICATIONS 10MHz / 5MHz / 1MHz PRECISION LCR METER TEST FREQUENCY 20Hz ~ 10MHz/5MHz/1MHz, 5 Digits, 0.005% INPUT IMPEDANCE 100 BASIC ACCURACY 0.1% (R, Z, X, G, Y, B, L, C) LCR-8000G Series TEST SPEED DC AC (>2kHz) MAX: 75mS MAX: 30mS FAST: 150mS FAST: 60mS FEATURES MEDIUM: 450mS MEDIUM: 120mS SLOW: 600mS SLOW: 900mS Wide Test Frequency 20Hz~10/5/1MHz TEST SIGNAL LEVELS Test Frequency Test Signal Level (rms) Step Accuracy 3MHz 10mV ~ 2V 1mV/10mV 2% 5mV 0.1% Basic Accuracy & 6 Digits > 3MHz 10mV ~ 1V 1mV/10mV 2% 5mV Measurement Resolution SHORT CIRCUIT CURRENT Max. 20mA Large LCD Display with Intuitive User MEASUREMENT RANGES Mode Measure Range R, Z, X, Rdc 0.1m ~ 100M Interface G, Y, B 10nS ~ 1000S Full Measuring Functions with DUT V/I L 0.1nH ~ 100kH C 0.01pF ~ 1F Monitor D 0.00001 ~ 9.9999 Q 0.1 ~ 9999.9 PASS/FAIL Function ( abs , % , ) -180 ~ +180 The Smarter Way to Characterize Components with Judgment Alarm MEASUREMENT PARAMETERS Impedance (Z), Phase Angle ( ), Inductance (L), Capacitance (C), AC Resistance (Rac), Quality Factor (Q), The LCR-8000G Series LCR meter, with test frequency up to 10MHz, provides accuracy, versatility and high Dissipation Factor (D), Admittance (Y), Conductance (G), Reactance (X), Susceptance (B), DC Resistance (Rdc) Average 1 ~ 256 Times resolution for a wide range of component measurements, even including DC resistance measurement and Voltage/Current monitoring. The Multi-Step function allows on-screen programming of customized C + R, C + D, C + Q, L + R, L + Q, L + D SERIES OR PARALLEL EQUIVALENT CIRCUIT DC Resistance Measurement measurement sequence with Pass/Fail indication. Each program includes 30 test steps and each test step can be SERIES EQUIVALENT CIRCUIT ONLY X + R, X + D, X + Q set with selected parameters and test limits. Under Multi-Step operation, a tedious work routine can be done Multi Step Mode PARALLEL EQUIVALENT CIRCUIT ONLY C + G, B + G, B + D, B + Q, B + R, L + G step by step automatically just at a press of a button. With Graph Mode, LCR-8110G, LCR-8105G and LCR-8101G Graph Mode display the component impedance response either over a wide range of test frequency sweep or over a wide POLAR FORM Z + Phase Angle, Y + Phase Angle range of test voltage sweep in a graph chart. This gives an analysis result of either impedance vs. frequency or Standard RS-232C / GPIB Interface AVERAGE 1 ~ 256 times impedance vs. applied voltage all at a glance. GPIB and RS-232C interfaces are available as standard for 320 x 240 DOT-MATRIX LCD DISPLAY instrument control and test result display on the PC. The rich features of LCR-8000G Series easily make your INTERFACE RS-232C, GPIB measurement tasks done at a very competitive price. POWER SOURCE AC 115V (+10%/-25%), AC 230V (+15% / -14%)(Selectable), 50/60Hz Wide Frequency Range With Friendly Graph Mode DIMENSIONS & WEIGHT 330(W) x 170(H) x 340(D)mm, Approx. 5kg Intuitive User Interface The graph function shows the component Specifications subject to change without notice. CR-8000GGD2DH characteristics in visual manner. Either voltage sweep The LCR-8000G Series is designed to perform precision STANDARD ACCESSORIES ORDERING INFORMATION or frequency sweep can be selected for horizontal impedance measurements over a wide frequency range scale. Just select the parameter, and set the start/stop User manual x 1 LCR-8110G 10 MHz Precision LCR Meter C. of 20Hz ~ 10MHz for LCR-8110G, 20Hz ~ 5MHz for voltage or the start/stop frequency of the sweep, LCR Power cord x 1 LCR-8105G 5 MHz Precision LCR Meter LCR-8105G and 20Hz ~1MHz for LCR-8101G. The -8000G will run through the sequence of LCR-8101G 1 MHz Precision LCR Meter Test lead LCR-12 x 1 instrument is capable of measuring 11 different measurements and show the results on a graph. parameters with 0.1% basic accuracy, which meets the This graphical parameter measurement performs the OPTIONAL ACCESSORIES SELECTION GUIDE characteristic verification of components and precision measurement requirements of components materials over the response to the changes in AC test Accessory Model and modules used in the RF circuits. The large LCD Brief Description LCR-8110G LCR-8105G LCR-8101G frequency or AC test voltage without the need of display with single-layer operation menu of LCR-8000G Test Fixture for axial & radial lead components LCR-05 complex programming of an external controller. When Series provides users with ultimate convenience to Test Lead with Kelvin clip (4 wire type) LCR-06A the graph gets out of the vertical range, the LCR- plug and play without much learning time. 8000G Series can automatically adjust the scale to Test Lead with Alligator clip (2 wire type) LCR-07 get full test information. On the graph the marker LCR-08 Test Fixture (Tweezers) for SMD/Chip components operation is available for detailed observation. Test Fixture for SMD/Chip components LCR-09 LCR-12 Test Lead with Kelvin clip (4 wire type) Multi Step Mode Pass/fail Function With Judgment Alarm LCR-13 Test Fixture for SMD/Chip components The Multi-Step mode is capable of running a series of In the Pass/Fail test, primary parameter measurement GTL-232 RS-232C Cable APPLICATIONS result is compared with user-defined limits and the measurements of a component at a number of user- GRA-404 Rack Adapter Panel (19 , 4U) pass or fail result is then displayed. Three methods, defined steps in sequence automatically. Total 64 Note means the accessories work with a frequency limitation (under 1MHz) including absolute limit, percentage and delta limit, programs can be saved into the non-volatile memory, are available for Hi(high) and Lo(low) limit setting Education Lab and Training Institution and each program contains up to 30 test steps. The LCR-05 LCR-06A LCR-07 LCR-08 LCR-09 LCR-13 LCR-12 based on the nominal test value. The Pass/Fail test parameter and Hi/Lo limits can be set respectively for checks whether the parameter measurement result Research & Design each test step. After a program being properly edited, sits within the limits, then displayPAS for within the instrument can run through all the measurement the limits, orL for lower than the low limit, or steps either at a press of the button under the Manual Quality Assurance VerificationH For higher than the high limit. A scale and bar Trigger selection, or automatically run the program by for displaying measurement result is shown at the detecting the connection of a DUT under the Auto center of the screen to give a graphical identification, Global Headquarters U.S.A. Subsidiary which greatly reduces operator s load in a long time Trigger selection. When all the test steps are GOOD WILL INSTRUMENT CO., LTD. INSTEK AMERICA CORP. inspection work. This scale and bar also facilitate the No. 7-1, Jhongsing Road, Tucheng City, Taipei County 236, Taiwan 3661 Walnut Avenue Chino, CA 91710, U.S.A. completed, the screen shows the measurement T +886-2-2268-0389 F +886-2-2268-0639 T +1-909-5918358 F +1-909-5912280 adjustment of the variable components. Either Pass reading of the parameter being selected for each step E-mail: marketing goodwill.com.tw E-mail: sales instekamerica.com or Fail result can be set with a buzzer alarm, which with Pass, HI, or LO measurement result. China Subsidiary Japan Subsidiary makes component or material sorting easy with Made to Measure Since 1975 sound identification. GOOD WILL INSTRUMENT (SUHZOU) CO., LTD. INSTEK JAPAN CORPORATION NO. 69, Lushan Road, Snd, Suzhou Jiangsu 215011 China 4F, Prosper Bldg, 1-3-3 Iwamoto-Cho Chiyoda-Ku, www.gwinstek.com Tokyo 101-0032 Japan T +86-512-6661-7177 F +86-512-6661-7277 E-mail: marketing instek.com.cn T +81-3-5823-5656 F +81-3-5823-5655 E-mail: info instek.co.jp Malaysia Subsidiary Korea Subsidiary Simply Reliable GOOD WILL INSTRUMENT (M) SDN. BHD. GOOD WILL INSTRUMENT KOREA CO., LTD. Our low TCO helps you control costs 27, Persiaran Mahsuri 1/1, Sunway Tunas, Room No.805, Ace Hightech-City B/D 1Dong, with reliable products and services. C. 11900 Bayan Lepas, Penang, Malaysia Mullae-Dong 3Ga 55-20, Yeongduengpo-Gu, Seoul, Korea LCR-8000G Series Made to Measure Since 1975 T +604-6309988 F +604-6309989 T +82 2 3439 2205 F +82 2 3439 2207 E-mail: sales goodwill.com.my E-mail : gwinstek gwinstek.co.kr