American Hakko Products, Inc. PRODUCT BULLETIN Bulletin No: PB260 Issue Date: November 5, 2007 Product: FM-203 Dual Port Soldering Station Part No: FM203-01 FM203-DP Comments: The Hakko FM-203 is a Dual Port high performance soldering station. Even when soldering lead-free solders the high performance allows lower operating temperatures. The soldering station can operate any of the following hand pieces, FM-2027 Soldering Iron, FM-2022 Parallel Remover (SMD tweezer), FM-2023 Mini Parallel Remover (SMD mini tweezer), FM-2024 Desoldering Module, and/or FM-2026 Nitrogen Soldering Iron. The soldering iron and desolder tool can be used in either or both ports and the tweezers are limited to one port with a soldering or desoldering iron in the other port. The station features a programmable sleep mode of 0-29 minutes or auto-power shut off at 30 minutes. Sleep mode, auto power shut off and tip temperature can be programmed separately for each port. The sleep mode reduces the tip temperature to approximately 200C (400F) after the programmed time (0-29 minutes). The lower tip temperature will reduce oxidation of the tip and improve the tip performance. When in sleep mode the tip will quickly return to temperature after the iron is removed from the holder. When utilizing the FM-2027 Soldering Iron the station uses the T15 series composite tip. The composite tip is a soldering tip in which a heating element and sensor are integrated with ceramic. Despite its highly compact design, the tip offers superior thermal response and greatly improved thermal recovery. T15 series tips are available in a wide variety of tip shapes and can also be used with the Hakko FM-203, FP-102 and FM-202 soldering stations. Any tip can be operated at temperatures 200 - 450C (400 - 840F). The station includes a card lock system to lock the preset soldering temperature. With the card removed operators can not adjust the working temperature. The FM-2022 uses T16 tips, The FM-2023 uses T9 tips, The FM-2024 uses N3 nozzles and The FM-2026 uses T17 tips. From... American Hakko Products, Inc. For pricing information, please contact your local American Hakko 28920 N. Avenue Williams. representative or our customer service department at (661) 294-0090. Valencia, CA 91355 Tel: (661) 294-0090 Fax: (661) 294-0096 www.hakkousa.com AHP14 Rev 2000-01 Documentation Provided By HMC Electronics 33 Springdale Ave. Canton, MA 02021 Specifications: FM-203 Soldering Station Power Consumption 140W 120V Temperature Range 200 - 450C (400 - 840F) Temperature Stability 5C (9F) Temperature Accuracy 15C (27F) Soldering Iron (No.FM-2027) Power Consumption 70W (24V) Tip to Ground Resistance < 2 Tip to Ground Potential < 2mV Cord Length 1.2m (47 in.) Total Length (w/o Cord) 188mm (7.4 in.) with 2.4D soldering tip attached Weight (w/o Cord) 30g (1.0 oz.) with 2.4D soldering tip attached Station Output 24V Dimensions 120(W) x 120(H) x 190(D)mm (4.7 x 4.7 x 7.5 in.) Weight (w/o cord) 2.7kg (5.9 lb.) Contents: Part No. Name FM203-01 FM203-DP N/A FM-203 soldering station 1 1 FM2027-02 Connector 1 2 B2387 Power cord 1 1 B2972 Control card 1 1 B3219 Sleeve assembly, Green, anti-bacterial 1 1 B3216 Sleeve assembly, Yellow, anti-bacterial 0 1 B2300 Heat-resistant pad 1 2 FH200-01 Iron Holder, Sleep, w/ 599B 1 2 B3253 Connecting cable 1 2 B2756 Tip tray 1 1 N/A Instruction manual 1 1 The FM2023-DP includes two FM-2027 connectors and sleep holders. Tips not included. From... American Hakko Products, Inc. For pricing information, please contact your local American Hakko 28920 N. Avenue Williams. representative or our customer service department at (661) 294-0090. Valencia, CA 91355 Tel: (661) 294-0090 Fax: (661) 294-0096 www.hakkousa.com AHP14 Rev 2000-01 Documentation Provided By HMC Electronics 33 Springdale Ave. Canton, MA 02021