11/11/2017 Type 12 Mild Steel Two Door Freestanding Enclosure (1418 FS Series) - Hammond Mfg. Quality Products. Service Excellence. Type 12 Mild Steel Two Door Freestanding Enclosure 1418 FS Series Continuous Hinge Door with Handle Application Designed to house electrical, electronic, hydraulic or pneumatic controls with provision for panel mounting or rack mounting of equipment. Provides a degree of protection from falling dirt, dust, oil and water. Available with front access only or both front and rear access. A variety of inner panels, rack mounting angles and swing frames are available to provide flexibility in equipment mounting. Standards UL 508A Type 12 CSA Type 12 Complies with NEMA Type 12 IEC 60529, IP54 Construction Formed 12 gauge steel (10 gauge on back of single access enclosures). Smooth, continuously welded seams without knockouts, cutouts or holes. Stiffeners on the rear of the enclosure provide rigidity. (Single access) Lifting eyes provide for easy enclosure handling. Doors are supported with heavy gauge continuous hinges. Doors are secured with a three point latch and operated with a key locking automotive type handle. Latch rods are equipped with rollers for easier door closing. Oil resistant gaskets are permanently secured. Provision for light kit mounting. Mounting channels are welded on the inside of the enclosure for mounting of optional inner panels or rack equipment rails. A bonding stud is provided on the door and a grounding stud is provided in the enclosure for each door. A literature pocket is provided for the inside of the door (Two pockets are provided for dual access units). Finish Cover and enclosure are finished in recoatable smooth ANSI 61 gray powder coating on the outside, with white powder coating on the inside. Optional inner panels, rails, frames and supports are available in white powder coating. Accessories Cooling Products Blowers and Fans Ventilation Center Panel Supports Door Stop Kit Drip Shield Kit Filtered Fans Floor Stand Kit 11/11/2017 Type 12 Mild Steel Two Door Freestanding Enclosure (1418 FS Series) - Hammond Mfg. Gland Plates Heaters Inner Panels Lighting Type 1 Louvered Ventilating Plates Panel Rails Temperature Controls Window Kits Ground Wire Kits Single Access Optional Part No. A B C F G Full Panel 1418AW18 60.06 48.06 18.06 32.03 23.13 60AWFW 1418ZW18 72.06 48.06 18.06 38.03 29.13 72ZWFW 1418ZX18 72.06 60.06 18.06 38.03 29.13 72ZXFW 1418ZY18 72.06 72.06 18.06 38.03 29.13 72ZYFW 1418BW20 90.06 48.06 20.06 47.03 38.13 90BWFW 1418BY20 90.06 72.06 20.06 47.03 38.13 90BYFW 1418BY24 90.06 72.06 24.06 47.03 38.13 90BYFW 1418ZW24 72.06 48.06 24.06 38.03 29.13 72ZWFW 1418ZX24 72.06 60.06 24.06 38.03 29.13 72ZXFW 1418ZY24 72.06 72.06 24.06 38.03 29.13 72ZYFW 1418ZX36 72.06 60.06 36.06 38.03 29.13 72ZXFW 1418BY36 90.06 72.06 36.06 47.03 38.13 90BYFW Refers to optional full height/full width panels. Depth panels/half height width panels are also available Dual Access Optional Part No. A B C F G Full Panel 1418ZWD24 72.06 48.06 24.06 38.03 29.13 72ZWFW 1418ZXD24 72.06 60.06 24.06 38.03 29.13 72ZXFW 1418ZYD24 72.06 72.06 24.06 38.03 29.13 72ZYFW 1418BYD24 90.06 72.06 24.06 47.03 38.13 90BYFW 1418ZXD36 72.06 60.06 36.06 38.03 29.13 72ZXFW Refers to optional full height/full width panels. Depth panels/half height width panels are also available