HARTING PROFINET Hybrid Cable, 4-wire + 4x1.5 , Cat. 5, FRNC PROFINET Hybrid Cable, 4-wire + 4x1.5, Cat. 5, FRNC Advantages General This data cable is suitable for PROFINET Hybrid Suitable for PROFINET cabling cabling according to type B in industrial premises and Category 5 / Class D according to areas. It is useable for flexible cords and installation ISO/IEC 11801 respectively EN also. The core is fitted with 4 data wires twisted to star 50173-1 and ISO/IEC 24702 quad that allows the transmission of Fast Ethernet respectively EN 50173-3 10/100Mbit/s and 4 power wires each of 1.5 mm Capable for flexible cords cross section. Applicable for industrial premises It is designed for fast assembling in benefit for the RoHS conform, UL recognized, customer. The PROFINET Hybrid cable is best flame retardant FRNC capable for termination with Han 3 A RJ45 Hybrid connector set. Description Order number PROFINET Hybrid Cable, 4-wire + 4x1.5, Cat. 5, FRNC 10 m ring 09 45 600 0310 20 m ring 09 45 600 0330 50 m ring 09 45 600 0340 100 m ring 09 45 600 0300 500 m reel 09 45 600 0320 Quad Wire: Stranded tinned copper AWG 22/7 Insulation: PE 1.55 mm Colour: wh, ye, bu, og Screen: Aluminate foil overlapped, tinned copper wire braid, braid coverage about 85% Power Wire: Stranded bare copper 84 x 0.15mm (AWG 16) Insulation: FRNC 2.4 mm Colour: bk, number printed Core Plastic tape overlaped Outer sheath: Thermoplastic Copolymer (FRNC), flame retardant Color of outer sheath: green, RAL 6018 Overall diameter: 9.7 mm 10.3 mm All data given are in line with the actual state of art and therefore not binding. HARTING reserves the right to modify designs without giving the relevant reasons. AWi 30.06.2008 HARTING PROFINET Hybrid Cable, 4-wire + 4x1.5 , Cat. 5, FRNC Technical Characteristics Performance Category 5 according to EN 50288-2-1:2003, IEC 61156-5:2002 Mechanical Characteristics Minimal bending radius During installation: 10 x diameter After installation: 5 x diameter Tensile strength max. 200 N Electrical Characteristics at 20C Quad Surface transfer impedance at 1 MHz 50 mOhm/m Surface transfer impedance at 10 - 100 MHz 10 mOhm/m Loop resistance max. 120 Ohm/km Insulation resistance min. 500 MOhm x km Signal runtime 5.3 ns/m Characteristic impedance at 100 MHz 100 Ohm +/- 5 Ohm Test voltage (wire/wire/screen rms 50Hz 1min) 1500 V Operating voltage 150 V Power Conductor resistance max. 14 Ohm/km Insulation resistance miin. 20 MOhm*km Test voltage (wire/wire/screen rms 50Hz 1min) 1500 V Operating voltage 150 V Chemical Characteristics Flame retardant IEC 60332-1-2 Free of hazardous substances RoHS 2002/95/EG Halogen free Thermal Characteristics Permissible temperature range - 20 C to + 80 C Printing HARTING PROFINET HYBRID CABLE CAT 5 FRNC * 4xAWG22/7 + 4x1.5 (SHIELDED) E130266 AWM 21282 * 09456000300200 internal lot number sequential length in meters Weight about 154 kg/km All data given are in line with the actual state of art and therefore not binding. HARTING reserves the right to modify designs without giving the relevant reasons. AWi 30.06.2008