HARHanTING Ha-VIS Industrial Cable 8-wire Cat. 6 24 HPR enlarged PVC A Ha-VIS Industrial Cable 8-wire, Cat. 6 , PVC A Advantages Application Suitable for generic cabling Category 6 / This high-speed data cable was designed for flexible installation A in industrial premises and its especially suitable for termination of Class E according ISO/IEC 11 801 respec- A HARTING RJ45 data plugs in IP 20 as well as in IP 67 / IP 65. tively EN 50 173-1 especially for flexible The four pair / eight wire PIMF-construction allows the transmissi- installation (patch cords) on of IT digital and analogue signals like Ethernet 10/100 Mbit/s, 10 Gigabit/s, video and voice services as well as IP-based data ser- Qualified for transmission up to 10 Gigabit vices. Ethernet 10GBase-T acc. IEEE 802.3an It delivers all characteristics to complete a generic cabling system Based on stranded copper wires AWG 26/7 according ISO/IEC 24 702 respectively EN 50 173-3. Maximum patch cord length specified up to 20 m (part of transmission channel delivers patch cord performance up to class E ) A 500 MHz Transmission performance meets Cat. 6 specification up to 500 MHz A Applicable for industrial premises for 10 Gigabit Ethernet transmission according IEEE 802.3an. High EMC capability based on the PIMF The cable is fully screened (each pair in metal foil plus an overall wire braid) and guaranties a very safety signal transmission and high construction EMC performance. Flame retardant, lead free and RoHS PVC is used as jacket material. The cable is flame retardant, lead compliant free and RoHS compliant. UL certified AWM Style 20276 Identification Part number Drawing Industrial Cable 8-wire, Cat. 6 , PVC A Sheath material: Polyvinylchlo- ride (PVC), fl ame retardant, lead free Colour: yellow, RAL 1021 Cable sheath diameter: 6.3 mm ... 6.9 mm Conductor Transmission performancen: wire: stranded bare copper 4x2xAWG 26/7 Cat. 6 / transmission class E up A A to 500 MHz according Insulation: PE, 1.05 mm ISO/IEC 11 801 and EN 50 173-1 colours: wh/bu, wh/or, wh/gn, wh/br Pairs Transmission rate: Aluminate foil overlapped PIMF 10/100 Mbit/s / 1/10 Gbit/s Screening tinned copper wire braid, Cable weight: 47 kg/km braid coverage about 70 % Jacket Order information: Polyvinylchloride (PVC), flame retardant, lead free 20 m ring 09 45 600 0532 50 m ring 09 45 600 0542 100 m ring 09 45 600 0502 500 m drum 09 45 600 0522 All data given is in line with the actual state of art and therefore not binding. HARTING reserves the right to modify designs without giving the relevant reasons. Data Sheet 0712 HARTING Ha-VIS Industrial Cable 8-wire Cat. 6 PVC A Technical characteristics Transmission performance Category 6 according to IEC 61 156-6 A Mechanical features minimum bending radius Repeated bending: 8 x cable diameter Singular bending: 4 x cable diameter max. 70 N Tensile strength Electrical characteristics at 20 C Conductor resistance max. 290 Ohm/km Insulation resistance min. 500 MOhm x km Propagation delay 5.3 ns/m Characterisic impedance at 100 MHz 100 Ohm +/- 5 Ohm Test voltage 700 V Operating voltage max. 100 V Chemical characteristics Flame retardant IEC 60 332-1-2 Free of hazardous substances RoHS 2002/95/EG UV resistant Thermic features Permissible temperature range fixed operation - 20 C ... + 80 C flexible operation - 20 C ... + 80 C Printing HARTING INDUSTRIAL CABLE CAT 6 S/FTP 4x2xAWG26/7 A E333435 AWM STYLE 20276 80C 30V 094560005000201 meter marking Charge Number HARTING LOGO Weight 47 kg/km