HARTING Industrial Cable 8-wire Cat. 6 PUR A Industrial Cable 8-wire, Cat. 6 , PUR A Advantages General Suitable for generic cabling Category This high-speed data cable was designed for flexible installation in industrial premises and its especially suitable for termination of 6 / Class E according ISO/IEC A A 11801 respectively EN 50173-1 HARTING RJ45 data plugs in IP 20 as well as in IP 67 / 65. especially for flexible installation (patch cords) The four pair / eight wire PIMF-construction allows the transmission of IT digital and analogue signals like Ethernet 10/100Mbit/s, Qualified for transmission up to 10GigaBit/s, video and voice services as well as IP-based data 10GigaBit Ethernet 10GBase-T acc. services. IEEE802.3an Based on stranded copper wires It delivers all characteristics to complete a generic cabling system AWG26/7 delivers patch cord according ISO/IEC 24702 respectively EN 50173-3. Maximum patch performance up to 500MHz cord length specified up to 20m (part of transmission channel class Applicable for industrial premises E ) A High EMC capability based on the PIMF construction Transmission performance meets Cat.6 specification up to 500 MHz A Flame retardant, halogen free and for 10GigaBit Ethernet transmission according IEEE802.3an. RoHS compliant The cable is fully screened (each pair in metal foil plus an overall wire braid) and guaranties a very safety signal transmission and high EMC performance. PUR is used as jacket material. The cable is flame retardant, halogen free and RoHS compliant. Identification Part number Drawing Industrial Cable 8-wire, Cat. 6 , PUR A 20 m ring 09 45 600 0630 50 m ring 09 45 600 0640 100 m ring 09 45 600 0600 500 m reel 09 45 600 0620 Wire: tinned stranded copper, AWG26/7 Insulation: PE, 1.05 mm Color code: whbu/bu, whor/or, whgn/gn, whbr/br Pairs : Aluminate foil overlapped PIMF Overall screen: tinned copper wire braid, braid coverage about 70 % Outer sheath: Polyurethane (PUR), flame retardant, halogen free, lead free Color of outer sheath: rape yellow, RAL 1021 Overall diameter: 6.3 mm 6.9 mm All data given are in line with the actual state of art and therefore not binding. HARTING reserves the right to modify designs without giving the relevant reasons. AWi 04.02.2011 HARTING Industrial Cable 8-wire Cat. 6 PUR A Technical Characteristics Performance Category 6 according to IEC 61156-6 A Mechanical Characteristics Minimal bending radius Repeated bending: 8 x diameter Single bending: 4 x diameter Tensile strength max. 70 N Electrical Characteristics at 20 C Conductor resistance max. 290 Ohm/km Insulation resistance min. 500 MOhm*km Propagation delay 5.13 ns/m Characteristic impedance 100 MHz (100 5) Ohm Test voltage 700 V Operating voltage max. 100 V Chemical Characteristics Flame retardant IEC 60332-1-2 Halogenfree IEC 60754-1 Oil resistant EN 60811-2-1 (90 C / 7x24h) Free of hazardous substances RoHS 2002/95/EG Thermal Characteristics Permissible temperature range fixed operation - 40 C to + 80 C flexible operation - 40 C to + 80 C Printing HARTING INDUSTRIAL CABLE S/FTP CAT 6 PUR A 4x2xAWG26/7 094560006000101 year/internal order number sequential length in metres Textintervals about 1000 mm Weight about 46 kg/km All data given are in line with the actual state of art and therefore not binding. HARTING reserves the right to modify designs without giving the relevant reasons. AWi 04.02.2011